Author Topic: Yet Another MFT3 Cart  (Read 1945 times)

0 Members and 1 Guest are viewing this topic.

Offline gwendal

  • Posts: 8
Yet Another MFT3 Cart
« on: January 10, 2021, 08:30 PM »
Yet another cart, inspired by the numerous projects on FOG:

325444-0
325446-1
325448-2

I documented the project on shaperhub: the parameterized fusion 360 .f3d file is also available on google drive: it designed to ensure the MFT3 height is 900mm.

Gwendal.


Offline mkasdin

  • Posts: 475
Re: Yet Another MFT3 Cart
« Reply #1 on: January 10, 2021, 08:58 PM »
I like the clamp cubby area. What goes on the French cleats.

Offline gwendal

  • Posts: 8
Re: Yet Another MFT3 Cart
« Reply #2 on: January 11, 2021, 01:16 AM »
What goes on the French cleats.
Not sure yet, there is a whole section on shaperhub. Maybe a paper roll holder. As upright beams, they also help with overall strength as this cart does not have a lot of frontal vertical surfaces.

Offline Wood_Slice

  • Posts: 100
Re: Yet Another MFT3 Cart
« Reply #3 on: April 05, 2021, 10:40 PM »
Im am planning to building my own in the next few weeks or so just havent decided on the design. I wanted 2 collums of systainer storage and a skinnier 3rd for my CT MIDI. One side would have 12” deep drawer trays for the systainers and the back may add more sys storage or drawers for most common used tools. I also wanted the section dividers facing out to have a 1.5 - 2” hardwood edge banding of sorts with domino holes for holding up panels during edge banding like that if Timothy Wilmots benches. Problem i keeping comming accross is the t-lock vs sys3 non-unit size heights. Im going bonkers atm.
DF 500 + Assortments | ETS EC 125/3 EQ | CT MIDI + CT-Fi| MFT3 + Elements| Installer's Set | TS55-REQ |