Author Topic: My MFT design and build walk-through  (Read 2894 times)

0 Members and 1 Guest are viewing this topic.

Offline Dusty.Tools

  • Retailer
  • *
  • Posts: 287
    • Dusty.Tools
My MFT design and build walk-through
« on: June 16, 2020, 01:34 PM »


Hey All, I just wanted to share a point let to my MFT build write up:

https://toolguyd.com/diy-mft-workbench-part-1-design-goals-frame-construction/

This is the first in 3-4 blogs I'm going to do walking through my design and build.

My daughter (7) and I also did a COVD home school project and created a couple of stop motion videos, starting with the frame assembly:



Thanks for all the inspiration.

Ben
« Last Edit: June 17, 2020, 02:20 AM by Dusty.Tools »
@dusty.tools

Offline Brian Puccio

  • Posts: 10
Re: My MFT design and build walk-through
« Reply #1 on: June 16, 2020, 01:53 PM »
This is really well done: both the project and your documentation. Thanks for sharing!

Offline Dusty.Tools

  • Retailer
  • *
  • Posts: 287
    • Dusty.Tools
Re: My MFT design and build walk-through
« Reply #2 on: June 17, 2020, 02:19 AM »
This is really well done: both the project and your documentation. Thanks for sharing!
Thanks :)

the project is the easy part, writing it up is hard!


Sent from my iPhone using Tapatalk
@dusty.tools

Offline TSO_Products

  • Retailer
  • *
  • Posts: 308
    • TSO Products LLC
Re: My MFT design and build walk-through
« Reply #3 on: June 17, 2020, 08:54 PM »
Hey, DustyTools - now there's a bit of jazzy documentation to intimidate the rest of us.
But that's OK - just keep building and posting.

Some of it might actually rub off on me - hope springs eternal  [wink]
Hans