Author Topic: The time has come  (Read 40696 times)

0 Members and 1 Guest are viewing this topic.

Offline ear3

  • Posts: 4267
Re: The time has come
« Reply #90 on: May 29, 2016, 03:49 PM »
That jointer is so sweet.  Sounds like you could take power nap in the time it takes the motor to wind down!
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T 18+3 w/Centrotec Installer's Set • PDC 18/4 • TID 18 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • Planex Easy • HL 850 • Vecturo OS 400 • AGC 18-115 • CT 36AC w/BT module • CT Sys w/Long-Life Bag • CT-VA 20 • MFT/3 • STM 1800

Offline WarnerConstCo.

  • Posts: 4184
    • Warner Mill Works
Re: The time has come
« Reply #91 on: June 09, 2016, 01:35 PM »
Dang German machines.


Offline Shane Holland

  • Festool Dealer
  • *
  • Posts: 11141
    • The Tool Nut's Festool Store
Re: The time has come
« Reply #92 on: June 09, 2016, 01:39 PM »
Nice. Nice.  [thumbs up]
The Tool Nut
Fast, Free Shipping - Festool Trained Experts - Unparalleled Customer Service
ToolNut.com
877-866-5688

Offline ear3

  • Posts: 4267
Re: The time has come
« Reply #93 on: June 10, 2016, 06:36 AM »
Happy planing.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T 18+3 w/Centrotec Installer's Set • PDC 18/4 • TID 18 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • Planex Easy • HL 850 • Vecturo OS 400 • AGC 18-115 • CT 36AC w/BT module • CT Sys w/Long-Life Bag • CT-VA 20 • MFT/3 • STM 1800

Offline Bert Vanderveen

  • Posts: 896
Re: The time has come
« Reply #94 on: June 10, 2016, 06:53 AM »
Kölle — sounds like "Kuh-l-luh". Wonderful machine, makes me quite envious!
Cheers, Bert Vanderveen

TS55 · TS55R · OF1010 · DF500 · MFT/3 + TSB1-MW 1000 + VL + CMS TS55 + CMS PS300 + LA-CS 70/CMS · CTL Midi · RTS400 · 2 x CXS Li 1,5 · T15+3 Li 4,2 · TI15 Impact Li 4,2 · Centrotec Sets 2008 + 2015 · PSB300 · LR32-SYS · RO150 · KS120 · 2 x MFK700 · RO90 · OFK700 · BS75 · OFK500 · OF2200 · CMS-GE · Vecturo 18 Li · TID 18 · TKS 80 EBS-Set · DTS 400 · ETS EC 125 w 150 pad · Surfix Set · CTL SYS · CT-VA-20 · … | Mirka 1230L P&C | Hammer: A3 31 Silent Power · N4400 · HS950 | TaigaTools: VacPods Pro Set
On order: … [ ! ]

Offline RL

  • Posts: 3040
Re: The time has come
« Reply #95 on: June 10, 2016, 06:54 AM »
superb.

Offline Tim Raleigh

  • Posts: 3614
    • Oakville Cabinetry
Re: The time has come
« Reply #96 on: June 10, 2016, 08:54 AM »
The sheen on that oak after it went through that planner is incredible.
Tim

Offline WarnerConstCo.

  • Posts: 4184
    • Warner Mill Works
Re: The time has come
« Reply #97 on: June 10, 2016, 09:50 AM »
The finish straight out of that planer is amazing.

six-point socket

  • Guest
Re: The time has come
« Reply #98 on: June 10, 2016, 10:00 AM »
Very cool machine! And the result:  [eek] [eek] Amazing!

Kind regards,
Oliver

Offline WarnerConstCo.

  • Posts: 4184
    • Warner Mill Works
Re: The time has come
« Reply #99 on: June 10, 2016, 01:42 PM »
Moving from Germany to the UK today.

Pretty nice jointer, it is a Wadkin. 


Offline Wooden Skye

  • Posts: 1173
  • My little girl was called home 12-28-15
Re: The time has come
« Reply #100 on: June 10, 2016, 03:19 PM »
Really nice!!  The jointer looks like 12" capacity, what about the planer?
Bryan

TS 55, (2) 1400 Guide Rails, 1900 Guide Rail, MFT/3, Domino ETS 150/3, RO 90, CT 26, OF1400, RO 150. RTS 400, LR 32 set, PS300 jigsaw, 3 abrasive systainers, (2) sys toolbox, (2) sys mini, clamps and other accesories

Offline WarnerConstCo.

  • Posts: 4184
    • Warner Mill Works
Re: The time has come
« Reply #101 on: June 10, 2016, 04:03 PM »
Planer is 25"x9"

Jointer is 16"