Author Topic: New Truck Build  (Read 11974 times)

0 Members and 1 Guest are viewing this topic.

Offline reddevil

  • Posts: 21
New Truck Build
« on: August 31, 2014, 03:36 PM »
At work we have received a new truck.




This is a proto type of a slide. The trays in it are also homemade. There are 6 standard sizes.





Offline VW MICK

  • Posts: 881
Re: New Truck Build
« Reply #1 on: August 31, 2014, 03:44 PM »
I like that

What is the material and what are the sizes ?

And also how do the boxs relate to the van

Offline reddevil

  • Posts: 21
Re: New Truck Build
« Reply #2 on: August 31, 2014, 03:45 PM »
Making the sliders. There is a high and low model, just as the trays.






Offline reddevil

  • Posts: 21
Re: New Truck Build
« Reply #3 on: August 31, 2014, 04:07 PM »
They are made of 4 mm thick marine plywood or form plywood (I don't know the English name right, I come from Belgium). I make them from that material so that they are watertight. That's on the work sometimes necessary
 Dimensions are; height  5.2 cm, width 10 cm, length 10 cm, 15 cm or 20 cm low model and height 10.4 cm, width 10 cm, length 10 cm, 15 cm or 20 cm high model.

They are going to be used as stokage in the truck.

Offline reddevil

  • Posts: 21
Re: New Truck Build
« Reply #4 on: September 02, 2014, 05:14 PM »
We are once again a little further.





Offline reddevil

  • Posts: 21
Re: New Truck Build
« Reply #5 on: September 03, 2014, 04:08 PM »
After a day building is the most done.






Offline reddevil

  • Posts: 21
Re: New Truck Build
« Reply #6 on: September 14, 2014, 05:10 PM »
I'm building a small water reservoir





Hooks for power cables and compressed air.


A cart for the miter saw, It is easier to handle.




Offline festooltim

  • Posts: 332
Re: New Truck Build
« Reply #7 on: September 14, 2014, 10:54 PM »
What kind of saw is that
Quantity is no substitute for Quality

2-mft3's ,  ct22,  ts55,  rotex125,  c12, kapex,  ras115,  65planer,  of1010,  LR32system, trion psb 300 eq,  parrallel guides,    sortainer,  routerbitsystainer,  guide rail acc. kit,  toolie,  t-shirt,  hat,  pen,  saftey glasses.

Offline waho6o9

  • Posts: 1478
    • Garage Door Handyman.com
Re: New Truck Build
« Reply #8 on: September 15, 2014, 01:22 PM »
I think it's a table saw and chop saw combo.


Offline TOOLTOWN

  • Festool Dealer
  • *
  • Posts: 505
    • tooltown.com
Re: New Truck Build
« Reply #9 on: September 15, 2014, 02:15 PM »
I think it's a table saw and chop saw combo.

It is a combination miter saw, table saw.  Unfortunately, as far as I know they are NAINA (see it's not just Festool that does that)

Ken
http://www.tooltown.com/
ken@tooltown.com
1-201-262-6337

Offline reddevil

  • Posts: 21
Re: New Truck Build
« Reply #10 on: September 15, 2014, 04:50 PM »
Yes it is a combination miter saw, table saw. Dewalt  D27111   http://www.klijnbevestigingsprodukten.nl/files/images/d27111.jpg

Offline reddevil

  • Posts: 21
Re: New Truck Build
« Reply #11 on: May 11, 2015, 05:24 PM »
With the warm weather coming,I built a small fridge in the truck. He runs on 12V or 230V.




Offline AndyG

  • Posts: 27
Re: New Truck Build
« Reply #12 on: May 20, 2015, 11:49 PM »
Taking time to set up your vehicle is commendable . every detail matters.

Offline NL-mikkla

  • Posts: 298
  • www.m144h.com
Re: New Truck Build
« Reply #13 on: May 21, 2015, 12:56 AM »
Sterk werk man

Offline reddevil

  • Posts: 21
Re: New Truck Build
« Reply #14 on: December 06, 2015, 03:33 PM »
A little progress.
Special drawers



Power distribution, i can also read the voltage and current. it have also two compressed air connections. It provides power to the entire truck.



 
 

Work light



A small workbench


Length stop for miter saw




« Last Edit: December 06, 2015, 03:48 PM by reddevil »

Offline dryvah

  • Posts: 23
Re: New Truck Build
« Reply #15 on: December 06, 2015, 07:56 PM »
Some very impressive stuff there! I especially like the latch you made for the drawers. I might steal this idea for the drawers in my truck.
Good work.

Offline Billy stray

  • Posts: 317
Re: New Truck Build
« Reply #16 on: December 10, 2015, 10:15 PM »
Looks good guy, I'm curious, what exactly do you do for work ?
Billy

Offline reddevil

  • Posts: 21
Re: New Truck Build
« Reply #17 on: December 12, 2015, 03:48 PM »
We do almost everything from the building. Plumbing, heating, electricity, tiling, bricklaying, roofing, excavation works, drywall,steel structures, wood structures, ......
This is in renovation and new construction that we are doing the work.

Latest project, a concrete basement.


Offline Curt Boyer

  • Posts: 203
Re: New Truck Build
« Reply #18 on: December 12, 2015, 07:46 PM »
Reddevil, nice truck setup! On your small workbench you have some Dewalt stand brackets I haven't seen before. Are they to mount a tablesaw or planer to the Dewalt stands? Can you give me they're Dewalt item number?
Cheers
Curt

Offline reddevil

  • Posts: 21
Re: New Truck Build
« Reply #19 on: December 13, 2015, 07:42 AM »

Offline Barman

  • Posts: 5
Re: New Truck Build
« Reply #20 on: January 05, 2016, 10:46 AM »
Reddevil,

can i ask where u found the locks for the drawers?

I find that these are so great. If u made them yourself, i take my hat off for u.