« previous next »
Pages: [1]   Go Down

Author Topic: My ideal workshop, aka how I would mess it up ..  (Read 1337 times)

0 Members and 1 Guest are viewing this topic.

Offline mino

  • Posts: 929
My ideal workshop, aka how I would mess it up ..
« on: June 08, 2021, 04:49 AM »
Here is a thread about "My ideal workshop" where I will contemplate on how I would setup my kit - had I known what I know now.

Of course, things *I* consider "ideal" may be junk for others.

To the record out what *I* define as "ideal" is approximately per below:
0) firstly I see "cost" as a 3-sided triangle of $, time and space
1) good-enough accuracy so a dry-fit fits
2) best possible accuracy at reasonable cost => go for the cost/value inflection point or just slightly beyond
3) minimal "operating costs" /this translates mostly to space used when shop is "mothballed"/

I expect this to be a long-living-posts thread for me. Will be changing the posts as my views change over time.
« Last Edit: June 08, 2021, 06:18 AM by mino »
Logged
When The Machine has no brains, use Yours.

Offline mino

  • Posts: 929
Dust collection/extraction
« Reply #1 on: June 08, 2021, 04:53 AM »
1x CTL 26 AC + Bluetooth module  /consideration: CTM version with air-flow sensor if expect to use commercially at some point/

wood processing role:
Festool CTL/CTM series basic main filter /non-AC/
Festool CTL/CTM 26 AutoClean bags
Festool CT-VA

dry/concrete role:
CTL/CTM series High Performance main filter /AC/
Dust-port closing accessory for deep-cleaning
no bag

what-if role:
Festool CTH series main filter
Festool CTH 26 H-class bag

hoses and accessories:
1x 3.5 m 27/32 AS hose (default with vac) integrated with 4m "green" plug-it cable
1x 3.5 m D36 m AS hose (from Workshop Cleaning Set) + BT remote
2x set of three D36 short metal extension tubes /fit in Systainer/
« Last Edit: June 08, 2021, 05:33 AM by mino »
Logged
When The Machine has no brains, use Yours.

Offline mino

  • Posts: 929
Sheet goods cutting
« Reply #2 on: June 08, 2021, 04:54 AM »
TS 55 FEBQ + HKC 18  /or TSC 55 REBQ, with riving knife/
PSBC 18 + track/circle accessory set


track/rail setup:
1x  FS/2 1400 LR32  /semi-permanently joined with one 376 into a 1776/
1x  FS/2 1016 LR32  /from 1400 LR32/
1x  FS/2 632  /from 1400/
     mobile "shortie" set in systainer:
1x  FS/2 376 LR32  /from 1400 LR32/
2x  FS/2 376  /from 1400/
2x  Makita connector set
     accessories:
1x  TSO GRS 16 PE
1x  TSO PGS  /tbc. which parts exactly/
2x  GECKO DOSH set

LR32 system:
LR32 basic set
dedicated router bits: 3mm, 5mm, 8mm /8mm shank/
« Last Edit: June 08, 2021, 06:09 AM by mino »
Logged
When The Machine has no brains, use Yours.

Offline mino

  • Posts: 929
Routing
« Reply #3 on: June 08, 2021, 04:54 AM »
OF1010 R

tbc...
Logged
When The Machine has no brains, use Yours.

Offline mino

  • Posts: 929
General drilling
« Reply #4 on: June 08, 2021, 04:55 AM »
TPC 18

tbc ...
Logged
When The Machine has no brains, use Yours.

Offline mino

  • Posts: 929
General tools
« Reply #5 on: June 08, 2021, 04:56 AM »
Festool CXS

tbc.
Logged
When The Machine has no brains, use Yours.

Offline mino

  • Posts: 929
Clamping
« Reply #6 on: June 08, 2021, 04:57 AM »
General heavy metal clamps /photo inbound/

2x 160mm Bessey/Festool ratcheting clamp

tbc ...
« Last Edit: June 08, 2021, 05:26 AM by mino »
Logged
When The Machine has no brains, use Yours.

Offline mino

  • Posts: 929
Surface processing (sanding, grinding)
« Reply #7 on: June 08, 2021, 04:57 AM »
ES ETS 125
AGC 18
ETS EC 125/3 + 150 pad
RS 200 or RS 2
Rotex 150
« Last Edit: June 08, 2021, 05:00 AM by mino »
Logged
When The Machine has no brains, use Yours.

Offline mino

  • Posts: 929
General material cutting
« Reply #8 on: June 08, 2021, 04:57 AM »
Makita LS1040 + custom fence + "front" clamp /part #pending/

budget allowing:
KS 60
« Last Edit: June 08, 2021, 05:03 AM by mino »
Logged
When The Machine has no brains, use Yours.

Offline mino

  • Posts: 929
Construction tooling
« Reply #9 on: June 08, 2021, 04:57 AM »
Hammer drill 5J class, any mass market make

Hobby framing/construction tools:
1x  Ryobi AirStream 16 gauge nailer
1x  HK 85 + grooving accessory /note: NAINA/

Dust collection:
Festool dust shroud for drilling
Festool dust shroud for buckets
« Last Edit: June 08, 2021, 06:13 AM by mino »
Logged
When The Machine has no brains, use Yours.
Pages: [1]   Go Up
« previous next »