Author Topic: Kitchen Fitter's Festool Van 2018 VW Crafter. (Read 27695 times)

bartekbygg · « **on:** November 10, 2018, 10:44 AM »

After 8 years of using my sprinter van o decided to change it and get a new van.
The choice was VW Crafter 4Motion.
I try to reuse the most of setup from sprinter and i manage it with some cosmetic changes.
That what i end up with.
I am using it for a couple of weeks now and it works great for me.
P.S. That is my previous car -
http://festoolownersgroup.com/workshops-and-mobile-vehicle-based-shops/mercedes-sprinter-kitchen-fitter-setup-with-festool-and-more/

Kitchen Fitter's Festool Van 2018 VW Crafter.

rst · « **Reply #1 on:** November 10, 2018, 10:53 AM »

Really nice setup, looks as probably good as the kitchens you install.

jobsworth · « **Reply #2 on:** November 10, 2018, 10:54 AM »

Wow that has to be one of the cleanest set ups Ive seen yet. Well done

Peter_C · « **Reply #3 on:** November 10, 2018, 11:14 AM »

"Clean" is the word I would use too. More like a show van for Festool.

When do the rest of the tools and materials go in, and turn it into a working van?

Samo · « **Reply #4 on:** November 10, 2018, 11:19 AM »

At least there is a little dust on the floor.

six-point socket II · « **Reply #5 on:** November 10, 2018, 12:59 PM »

Looks great, love it! Thanks for sharing!

Kind regards,
Oliver

Kristian · « **Reply #6 on:** November 10, 2018, 01:55 PM »

Wow, what a great setup! A kitchen fitter's dream come true. :-)

grobkuschelig · « **Reply #7 on:** November 10, 2018, 01:59 PM »

What a neat setup! Great pictures!
Thanks for sharing.

If you have the time, a van-tour would be highly appreciated!

magellan · « **Reply #8 on:** November 10, 2018, 04:13 PM »

My shop should look so nice. I agree you deserve to show this off with a few more pics of how you work out of it

Really nice

Sparktrician · « **Reply #9 on:** November 10, 2018, 05:28 PM »

So beautifully done! I admire your organization.

TOOLTOWN · « **Reply #10 on:** November 10, 2018, 07:57 PM »

Looks great!!

How do you keep the drawers from sliding out during normal driving/turning?

Ken

chipper338 · « **Reply #11 on:** November 15, 2018, 06:14 PM »

Impressive!

chipper338 · « **Reply #12 on:** November 15, 2018, 06:20 PM »

I gotta ask. How much did that vehicle, the tools and the parts cost?
Thanks,

Kevin C. · « **Reply #13 on:** April 12, 2019, 11:08 PM »

Super clean set up! I don't see a table saw in there, do you somehow work without one usually, of is it just not in the photos?

RightAngleDesign · « **Reply #14 on:** April 14, 2019, 10:17 AM »

The inside of your van is nicer than my kitchen.

Bob D. · « **Reply #15 on:** April 14, 2019, 10:26 AM »

I like the sign.

(F)aster, (E)asier, (S)marter (Tool)s = FESTOOL :-)

Edit: Just to be clear, I like the whole setup, not just the sign.
Nicely laid out, everything in its place, with lots of room left to
haul material, cabinets, and/or the seldom used tool.

grobkuschelig · « **Reply #16 on:** April 14, 2019, 02:55 PM »

What a beautyful setup you have there!
Great van and a real dream in terms of order and equipment.

DashZero · « **Reply #17 on:** April 16, 2019, 03:05 PM »

Very nice and inspirational.

MT Carpentry And Joinery · « **Reply #18 on:** May 26, 2019, 02:45 PM »

What size wheel base is this van ? Mwb or lwb ? Cheers

bartekbygg · « **Reply #19 on:** July 03, 2019, 06:00 PM »

Quote from: Kevin C. on April 12, 2019, 11:08 PM

Super clean set up! I don't see a table saw in there, do you somehow work without one usually, of is it just not in the photos?

There is a table saw Precisio CS 50 on right side of vacum cleaner

bartekbygg · « **Reply #20 on:** January 23, 2020, 04:08 AM »

Just got fancy licence plates for my Crafter