Author Topic: TSO Guide Rail Adapter with Star Knobs?  (Read 4165 times)

0 Members and 1 Guest are viewing this topic.

Offline Bugsysiegals

  • Posts: 823
Re: TSO Guide Rail Adapter with Star Knobs?
« Reply #30 on: January 29, 2021, 03:48 PM »
Not sure how much clearance you have but perhaps the thumbscrew like this wouldn’t even rub and would be enough to grip ...

326691-0326693-1326695-2

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Mike Goetzke

  • Posts: 746
Re: TSO Guide Rail Adapter with Star Knobs?
« Reply #31 on: January 30, 2021, 10:03 AM »
Not sure how much clearance you have but perhaps the thumbscrew like this wouldn’t even rub and would be enough to grip ...

(Attachment Link) (Attachment Link) (Attachment Link)

Thanks for the info.

I like the Kipp star knobs since they are a little easier to grip, match the TSO star knobs, doubt I will need any more depth of cut than approximately 1-5/8" (42mm), and they match the TSO star knobs  ;D.

For others that need to maximize depth of cut but want tool-less during my search I did find some M5 thumb screws that are 12mm diameter and the head is only 5mm tall. Although, these may be more difficult to tighten and loosen.