Author Topic: So this baby turned up today  (Read 1592 times)

0 Members and 1 Guest are viewing this topic.

Offline online421

  • Posts: 148
So this baby turned up today
« on: May 07, 2021, 05:41 AM »
My new spindle moulder arrived today, SCM TI145EP, it comes with
Pro-TL version, this is the side sliding table
Electric spindle (I hate belt changing)
12 inch touch screen, one touch and the fences/spindle moves itself into position.

At the moment it measures 1.4m x 2.6m x 1.9m, weighs 1200kg, by the time I put it together it will measure 1.6m x 3.9m x 1.9m. it dwarfs everything else in my workshop including my 1100mm wide twin belt SCM sander.
No damages to all corners, just want to say a big thank you to everyone involved in loading and unloading of the machine.

Felder Profil 45 was considered for a brief moment but it doesnt have the side sliding table which is top priority for my workshop. so went ahead with the SCM.

Busy weekend ahead completing scheduled works, will up load more photo once set in place.

Just very glad its finally here given the global pandemic we are having, I ordered it in July 2020, SCM finished building it in Dec 2020. It arrived at the distributors around mid February.
Griggio Unica400
Felder AD951
Masterwood OMB1V
Omga T55-300
SCM 5 RCS1100
SCM TI145EP
Comatic DC40
Chicago Pneumatics CPRS10500
Ceccato CDX 12
Holytek DC006
Festool DF700XL, LEX3, OF1010, OF2200, CT36, VAC SYS
Starmix 1635
Danfoss VLT 2880
Sicar TOP6

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline fshanno

  • Posts: 1051
Re: So this baby turned up today
« Reply #1 on: May 08, 2021, 01:54 AM »
Holy moly, I couldn't afford the tooling let alone the machine.  I don't get it.  How can that go in a two car garage?  You've got 3 phase power in there?  You running 2 shifts in that garage?  I wouldn't even know what to do with the dust.  It's all I can do to handle the chips from my 6" jointer and 12" lunchbox planer. 
The one thing we learn from history is that we never learn from history.

Offline online421

  • Posts: 148
Re: So this baby turned up today
« Reply #2 on: May 08, 2021, 05:07 AM »
Holy moly, I couldn't afford the tooling let alone the machine.  I don't get it.  How can that go in a two car garage?  You've got 3 phase power in there?  You running 2 shifts in that garage?  I wouldn't even know what to do with the dust.  It's all I can do to handle the chips from my 6" jointer and 12" lunchbox planer.

Its actually a 3 car garage, but I have too machines in there, I managed to place a 3.8m slider, 20 inch TP combo (Felder AD951F), swing chisel mortiser, 20 inch bandsaw, 10hp compressor, bag house extractor and a 1100mm wide twin belt sander in the garage. Yes I have 3 phase but no I am one man band, I have part timers on the weekend to help out, This is only part of the workshop, there is a storage and a dedicated spray booth at the back of the property.
Griggio Unica400
Felder AD951
Masterwood OMB1V
Omga T55-300
SCM 5 RCS1100
SCM TI145EP
Comatic DC40
Chicago Pneumatics CPRS10500
Ceccato CDX 12
Holytek DC006
Festool DF700XL, LEX3, OF1010, OF2200, CT36, VAC SYS
Starmix 1635
Danfoss VLT 2880
Sicar TOP6

Offline JonathanJung

  • Posts: 204
  • www.timberlightdesigns.com
    • Timberlight Designs
Re: So this baby turned up today
« Reply #3 on: May 10, 2021, 10:03 AM »
Nice! I'd be interested in seeing more photos of your shop. Did you pay for 3ph to the building?

Offline online421

  • Posts: 148
Re: So this baby turned up today
« Reply #4 on: May 11, 2021, 07:00 AM »
Nice! I'd be interested in seeing more photos of your shop. Did you pay for 3ph to the building?

will post more photos once the final position for the spindle moulder is confirmed, yes I had 3ph installed. where I live its residential but years ago when it was subdivided, for whatever reason they had, the line company put in 3 phase box for every property. so I only had to upgrade the main cable to the box to get 3 phase. still a little fortune though.

This is likely where the SM will live. photo does not do justice, the user manual says ideally I need 7.6m x 6.6m, in reality I dont have that kind of space, it lives in a space of 2.1m x 4.8m

 
Griggio Unica400
Felder AD951
Masterwood OMB1V
Omga T55-300
SCM 5 RCS1100
SCM TI145EP
Comatic DC40
Chicago Pneumatics CPRS10500
Ceccato CDX 12
Holytek DC006
Festool DF700XL, LEX3, OF1010, OF2200, CT36, VAC SYS
Starmix 1635
Danfoss VLT 2880
Sicar TOP6

Offline rvieceli

  • Posts: 1490
Re: So this baby turned up today
« Reply #5 on: May 11, 2021, 08:49 AM »
@online421 where CCC in the world are you located? Pics look non-US. Just wondering. Thanks

Ron

Offline online421

  • Posts: 148
Re: So this baby turned up today
« Reply #6 on: May 12, 2021, 05:28 AM »
@online421 where CCC in the world are you located? Pics look non-US. Just wondering. Thanks

Ron

I am in New Zealand. cheers.
Griggio Unica400
Felder AD951
Masterwood OMB1V
Omga T55-300
SCM 5 RCS1100
SCM TI145EP
Comatic DC40
Chicago Pneumatics CPRS10500
Ceccato CDX 12
Holytek DC006
Festool DF700XL, LEX3, OF1010, OF2200, CT36, VAC SYS
Starmix 1635
Danfoss VLT 2880
Sicar TOP6