Author Topic: Scroll Saw? Best one?  (Read 2766 times)

0 Members and 1 Guest are viewing this topic.

Offline 3PedalMINI

  • Posts: 493
    • Signature Sound & Video
Scroll Saw? Best one?
« on: September 23, 2015, 10:32 AM »
Anyone have recommendations for a scroll saw? have a project planned that requires some very detailed work. My budget is $1000 for it...However it seems as if the dewalt scroll saw is the best? I have an old delta saw but it sucks and need something else!

TIA!
The Bitterness of poor quality remains long after the sweetness of low price is forgotten -Benjamin Franklin

Professional Custom Audio Video System Designer/Installer serving Southern - Middle NJ, Eastern PA & the Surrounding Shore Points.
www.sigsv.com

Kapex 120,TS55,RO150,ETS125,CT-26,CT-MIDI,Tradesmen Cleaning Kit, Festool Ratchet Kit, Sys-lite, Sys Roll Cart, T18 +3, 2013 Centrotec Kit, Carvex 420, Carvex Accessory Kit, CXS,RO90, TI15 and Various Festool Systainers

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline teocaf

  • Posts: 602
Re: Scroll Saw? Best one?
« Reply #1 on: September 23, 2015, 11:25 AM »
Excalibur and Hegner come up as top of the line in my searches.  dewalt is also a good one from what i'm hearing.  The features matter as well as the blades.  I haven't used any of them, but I'm doing the same research as you at this moment, talking to people at a scrollsaw club and reading some of the forums dedicated to the craft.  You may get some better suggestions from those sources.  My requirements are also geared towards using it for materials other than wood, so we may be looking at different machines.
Here's a quick article on a few noteworthy machines:

http://www.sheilalandrydesigns.com/articles/scroll-saw-selection

Offline Don T

  • Posts: 2059
  • Phoenix, Az
Re: Scroll Saw? Best one?
« Reply #2 on: September 23, 2015, 12:06 PM »
I agree with the Excaliber and Hegner as the best but I don't think you will be dissapointed with the Dewalt. I've had mine for years, used to use it often but has been years since I've done any scroll-sawing.
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS, C18, HL850, Vac Sys set

Offline Kev

  • Posts: 7652
Re: Scroll Saw? Best one?
« Reply #3 on: September 23, 2015, 06:38 PM »
I'll say Hegner ... but only consider the variable speed machines.


Offline Mort

  • Posts: 355
  • World's Tallest Midget
Re: Scroll Saw? Best one?
« Reply #4 on: September 23, 2015, 07:52 PM »
I have a DeWalt, it's great. Smooth, cuts great, solidly built. Good sized table.

One thing I would like about the more expensive saws - on the DeWalt when you want to do a bevel cut the table tilts, whereas on Excalibers the blade and arm tilts. Not a huge deal because I don't do many bevel cuts but still something to consider.
I hate signatures.

Offline Hud

  • Posts: 36
Re: Scroll Saw? Best one?
« Reply #5 on: September 23, 2015, 08:23 PM »
I have one of the Delta variable speed units that I bought in the late 80's it is a good machine and very durable but not as smooth as the Hegner or Excaliber.  It is good for metals.

Offline Steve Rowe

  • Posts: 830
  • Teach them safety when they are young.
Re: Scroll Saw? Best one?
« Reply #6 on: September 23, 2015, 09:02 PM »
If I could find one, I would buy an Eclipse scroll saw in a heartbeat.  I think they were made by a guy in his VA garage when I researched this several years ago but the website seems to be dead.