Author Topic: Pretty good price on a band saw sized mobile base  (Read 3537 times)

0 Members and 1 Guest are viewing this topic.

Offline bill-e

  • Posts: 504
  • Rindge, New Hampshire, USA
    • New Hampshire Woodworker
Pretty good price on a band saw sized mobile base
« on: September 03, 2007, 07:55 AM »
Hi Folks,

I just found and ordered from Amazon this HTC Base for my band saw.  From this link click on the Related Searches " universal mobile bases" and sort from Low to High and you'll see about 4 or 5 different sizes in this style.

$44 plus free shipping for a welded base.


Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline brandon.nickel

  • Posts: 241
  • Currently Peoria, IL - Eventually back to CO
Re: Pretty good price on a band saw sized mobile base
« Reply #1 on: September 09, 2007, 10:43 PM »
I've got the same base for my Powermatic 54A jointer.  I was worried that the wheels wouldn't lock securely, but it has never moved on me.  It's a nice piece of equipment.
TS55, MFT1080, Domino, OF1400, LR32, RO150E, DTS400, Trion, CT33

Offline bruegf

  • Posts: 801
  • Michigan
Re: Pretty good price on a band saw sized mobile base
« Reply #2 on: September 14, 2007, 07:42 PM »
I just received one of these but so far I'm severly disappointed.   My 6" jointer shakes like a lambs tail in a wind storm.  The bottom plates the machine sits on are a flexing so badly I don't dare actually use the jointer on the base.   If I give the jointer a good push it will rock back and forth for a good 10 seconds because of the base plates flexing.

I am missing something - I've never used a mobile base before?

Thanks

Fred
Fred

Offline bill-e

  • Posts: 504
  • Rindge, New Hampshire, USA
    • New Hampshire Woodworker
Re: Pretty good price on a band saw sized mobile base
« Reply #3 on: September 14, 2007, 07:54 PM »
Fred, I'm using it on my 14" bandsaw and I think it works fine.

Could it be too big for the base of the jointer?  I can see if the jointer frame isn't sitting up against or real close to the mobile base frame that the plates may sag.  If you decide to keep it a sheet of plywood on top of the plates might solve that problem.

As for the rocking.  When you set the front brake adjust it so that it's just putting pressure on the floor to provide the braking action, not lifting up the wheel.  Personally I like 4 point mobile bases for my heavier equipment.

If you still don't like it, log on to amazon and print out your return label.


Offline Emmanuel

  • Posts: 174
Re: Pretty good price on a band saw sized mobile base
« Reply #4 on: September 14, 2007, 08:06 PM »
I bought one of the universal model (the HTC 3000 if my memory is good). This model was terrible. It was rated 700lbs but was shaking excessivley with my 450lbs bandsaw. I think the design of this particular model is flawed bacause the side rails are neither L shaped nor reinforce so they bend very easily with vibration.
The model you are recommending doesn't seem to have the same flaw due to the to horizontal bars undeneath.

Offline bruegf

  • Posts: 801
  • Michigan
Re: Pretty good price on a band saw sized mobile base
« Reply #5 on: September 14, 2007, 09:33 PM »
The jointer base is only 17 x 14 so it just barely is sitting on the metal base plates.  The rocking is coming from the fact that the base plates are flexing badly, even when the base is not lifted at all.   

I may try laminating a couple of layers of 1/2 or 3/4 plywood and screwing that to the frame and see if that helps.  I'd sure like to see this thing work as it makes moving the jointer around so much easier, especially since when I finally decided to buy, the price had dropped to $37, so I got a heck of a deal (at least if it ends up working ok).

Fred
Fred

Offline bill-e

  • Posts: 504
  • Rindge, New Hampshire, USA
    • New Hampshire Woodworker
Re: Pretty good price on a band saw sized mobile base
« Reply #6 on: September 15, 2007, 01:21 PM »
Yea, that sounds like the problem.  a single 3/4" tight fitting piece would do it I bet.

I also got my for 37, just emailed Amazon and and asked for a rebate when I saw the price drop.  You can usually keep doing that for 30 days.