Author Topic: Nova Viking DVR 16” bench drill press  (Read 8535 times)

0 Members and 2 Guests are viewing this topic.

Offline grayedout

  • Posts: 43
Re: Nova Viking DVR 16” bench drill press
« Reply #60 on: April 02, 2020, 05:35 PM »
I just come across this post and have a couple of video on this drill press on has a chuck replacmemt
The Drill

The Chuck
https://youtu.be/fUiz4ny-G0I?t=242
Ruwi Clamping plate




 
« Last Edit: April 02, 2020, 05:41 PM by grayedout »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Claimdude

  • Posts: 386
Re: Nova Viking DVR 16” bench drill press
« Reply #61 on: May 10, 2020, 09:45 AM »
Hi Viking owners,

I have a Viking on order and am building an 80/20 stand with drawers. I would like to have this ready to set the drill press on when it arrives without having to move it later. To that end I would to drill 4 holes in the top to attach the base but need a measured drawing of the base (which I haven't been able to locate) or at the least the measurements (width, length and distance from front end of slot to the front edge of the base) along with a center to center measurement from slot to slot. Does anyone here know where I can find that info or be wiling to take the measurements off the base of their Viking? I would greatly appreciate any help you all can provide!

Jack Lemley

Offline Erich

  • Posts: 16
Re: Nova Viking DVR 16” bench drill press
« Reply #62 on: May 10, 2020, 11:22 AM »
@Claimdude

I measured my Viking for you.

The base is 10.5" by 18.375".

The holes average 0.52" diameter.

All four holes are set back 1.385" to the centerline from each edge.

The slots are 5.375" on center and 2.75" back from the front edge.
« Last Edit: May 10, 2020, 11:34 AM by Erich »

Offline Claimdude

  • Posts: 386
Re: Nova Viking DVR 16” bench drill press
« Reply #63 on: May 10, 2020, 12:39 PM »
Thanks Erich!

@Claimdude

I measured my Viking for you.

The base is 10.5" by 18.375".

The holes average 0.52" diameter.

All four holes are set back 1.385" to the centerline from each edge.

The slots are 5.375" on center and 2.75" back from the front edge.