Author Topic: Fritz and Franz Jig for the Sliding Table Saw  (Read 9463 times)

0 Members and 1 Guest are viewing this topic.

Offline Steve Rowe

  • Posts: 829
  • Teach them safety when they are young.
Fritz and Franz Jig for the Sliding Table Saw
« on: January 31, 2016, 10:05 PM »
If you have a sliding table saw, this is a must have jig if you do small work.  While I tailored this for my needs, there are plans available for the Fritz and Franz jig on the German Festool website in the magazine issue Holzidee 13.

This is my version of the jig:


Steve

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Acrobat

  • Posts: 469
Re: Fritz and Franz Jig for the Sliding Table Saw
« Reply #1 on: April 03, 2016, 08:14 PM »
What an awesome idea. As long as one has the sliding table or table saw with the slot this looks great. I've never seen clamping both the front and back of a workpiece before and would presume it could cause problems if it moved, and the offcut is trapped between the blade and fence, but from your video and another I have seen it appears a great way to secure timber and get a repeatable small offcut done quickly and easily. I'm keen on trying this at some stage. I'm surprised it isn't used more often.
Don't wake me, I'm livin' the dream!

Offline Gone

  • Posts: 925
Re: Fritz and Franz Jig for the Sliding Table Saw
« Reply #2 on: April 04, 2016, 07:31 AM »
We recently had a good discussion on the Fritz and Franz setup on the original FOG. It also talked about the manufactured version from RUWI that takes it up a notch or 2. For any interested the links below.

https://shop.ruwi.de/en/product/clamping-and-sawing-system-comfort/

John

Offline Wooden Skye

  • Posts: 1171
  • My little girl was called home 12-28-15
Re: Fritz and Franz Jig for the Sliding Table Saw
« Reply #3 on: April 04, 2016, 09:27 AM »
Steve

Great jig and video showing how it works.  Never heard of the jig before, but then again never looked at sliders.  Your slider looks like a fantastic machine.
Bryan

TS 55, (2) 1400 Guide Rails, 1900 Guide Rail, MFT/3, Domino ETS 150/3, RO 90, CT 26, OF1400, RO 150. RTS 400, LR 32 set, PS300 jigsaw, 3 abrasive systainers, (2) sys toolbox, (2) sys mini, clamps and other accesories

Offline Steve Rowe

  • Posts: 829
  • Teach them safety when they are young.
Re: Fritz and Franz Jig for the Sliding Table Saw
« Reply #4 on: April 05, 2016, 10:35 PM »
The RUWI looks interesting.  I will have to check this out at this years IWF. 

I have completed the stop blocks and the scale.  These tee tracks worked very well as the stop blocks glide very easily across the 3 raised ribs.  At this point, I wonder why I waited so long to make this jig - very useful and versatile.


Offline Gone

  • Posts: 925
Re: Fritz and Franz Jig for the Sliding Table Saw
« Reply #5 on: April 06, 2016, 07:41 AM »
Steve, Martin USA offered a special buy of the RUWI last Fall. Its was only $675.00 LOL. That only about $1000.00 CDN. I made my F&F in about an hour with about $30.00 of materials including the adjustable stops. It replaced a couple of jigs I previously used and gets used almost everyday.

John

Offline Tinker

  • Posts: 3745
Re: Fritz and Franz Jig for the Sliding Table Saw
« Reply #6 on: April 06, 2016, 08:14 AM »
As I was watching the vid, I was thinking a jig like that wood be great on my CMS with the sliding extension.  Only the CMS doesn't have any T-track  :(
Tinker
Wayne H. Tinker

Offline Steve Rowe

  • Posts: 829
  • Teach them safety when they are young.
Re: Fritz and Franz Jig for the Sliding Table Saw
« Reply #7 on: April 06, 2016, 01:35 PM »
Steve, Martin USA offered a special buy of the RUWI last Fall. Its was only $675.00 LOL. That only about $1000.00 CDN. I made my F&F in about an hour with about $30.00 of materials including the adjustable stops. It replaced a couple of jigs I previously used and gets used almost everyday.

John

Ouch!- I guess I missed out on that bargain.  The only things I didn't have on hand were the tee tracks and adhesive scale.  I spent about $24 on those.  I made my own stops out of scrap and it is very useful as a parallel fence for hardwoods. 

Offline Acrobat

  • Posts: 469
Re: Fritz and Franz Jig for the Sliding Table Saw
« Reply #8 on: April 06, 2016, 10:39 PM »
As I was watching the vid, I was thinking a jig like that wood be great on my CMS with the sliding extension.  Only the CMS doesn't have any T-track  :(
Tinker
Exactly what I was thinking Tinker. I guess we'll need to be a little bit creative and come up with a solution for the CMS's sliding table. I'm sure there's a way to create it, just not sure how I'm gonna do it yet.[unsure]
Don't wake me, I'm livin' the dream!

Offline Gone

  • Posts: 925
Re: Fritz and Franz Jig for the Sliding Table Saw
« Reply #9 on: April 07, 2016, 07:49 AM »
Unfortunately the Fritz and Franz is more suited to a larger sliding table surface to use and reference from. The CMS really doesn't seem to have the requirements. While nice in design its still a cabinet saw style. Its good that the jig gave you inspiration to see if you can adapt it to your situation.

                 

Offline krudawg

  • Posts: 79
Re: Fritz and Franz Jig for the Sliding Table Saw
« Reply #10 on: November 16, 2020, 09:50 AM »
The RUWI looks interesting.  I will have to check this out at this years IWF. 

I have completed the stop blocks and the scale.  These tee tracks worked very well as the stop blocks glide very easily across the 3 raised ribs.  At this point, I wonder why I waited so long to make this jig - very useful and versatile.
[/quote
For all the FOG members that want to get their hands  on the Commercial version of the Fritz and Franz Jig by RUWI, I have great news for you! 
They are available on the Felder eshop site.  They are priced at $858.00 plus shipping.  Don't rush to their site since the item is not in stock- Yet
Ted
MFT/3, DF 500, Hammer K3 Winner, TS55,  Sjoberg Elite 1500 Workbench, Fuji MiniMite4 Platinum,
Former Marine, Vietnam Vet