Author Topic: first test inlay with Shaper Origin  (Read 346 times)

0 Members and 1 Guest are viewing this topic.

Offline HowardH

  • Posts: 1317
first test inlay with Shaper Origin
« on: December 02, 2020, 08:53 PM »
I got the machine about a week ago (early Christmas present to myself) and already have been learning things.  One of the things I wanted to try out first was the inlay functionality.  They have a butterfly inlay file ready to go so that's what I used.  It really is as easy as they say it is. There are few rules you need follow, ie. don't set the depth of cut deeper than the diameter of the bit, figuring out whether you need to cut inside the line, outside the line or on the line.  That will come with more familiarity.  These are my first attempt at doing an inlay.  I purposely left the pocket shallow so I could get the inlay piece in and out easily. 

323736-0

323738-1

The real issue, at least for me, how to get familiar and at least capable with Affinity Designer.  For example, I have a longhorn logo I want to convert to an outline the SO can recognize so I can use it for an inlay.  It's probably not hard but I have to figure that out somehow.  I will say the machine performs as described and the fun factor is pegged.  I have a number of templates I want to make for cutting/cheese board designs. 
Howard H
The Dallas Texas Festool Fanatic!

Mark Twain:  "I didn't attend the funeral, but I sent a letter approving of it." "If you tell the truth you don't have to remember anything."

mft1080, P1cc, MFT/3, T15, TID-18, RO150FEQ, MT55cc, RTS400, CT22, CT36E, 800, 1080, 1400, 1900 rails, OF 2200, OF1400, CSX, C18, VacSys, Vecturo, Qwas dogs, Parf Dogs, Zobo's, Syslite Uni, CMS GE. Mafell DDF40, Sawstop contractor, PM 1500, Shaper Origin.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline PaulMarcel

  • Posts: 1542
    • VoilĂ , my blog
Re: first test inlay with Shaper Origin
« Reply #1 on: December 02, 2020, 09:45 PM »
As for Affinity Designer, it doesn't have an automatic trace function you'd want to convert the longhorn logo into a vector, but there are a lot of free online services that do it. I did a search for "online vector outline" and found several including the one I use (doesn't mean it's the best, just what I tried first and the result was perfect for my needs: AutoTracer.org). Autotrace is a long-standing request from users, but it's never on the product path. I have to think there's a patent blocking that feature when there are so many easily licensed algorithms they could pull in over a weekend. That said, though, I love Designer. I'm using it to design a triple radial veneer top and include veneer photos from CertainlyWood.com to see which I'd want.
Visit my blog for Festool adventures
IG: @PaulMarcel328 - basically stories, mix of circus, woodworking, maybe gym stuffs... it's not an extension of my blog, /tedtalk