Author Topic: Fastcap Uni-Vac  (Read 212 times)

0 Members and 1 Guest are viewing this topic.

Offline ChuckS

  • Posts: 3801
Fastcap Uni-Vac
« on: September 19, 2022, 11:13 AM »
I picked up my uni-vac from Lee Valley Tools, something I "special ordered" for my Kapex, but is now available as a standard stock item. One end of the accessory is mounted to the dust port on the Kapex, and the other end to a hose connected to a Dust Deputy. It works as advertised:

Hose end of uni-vac

Tight seal

Dust stream

One observation is that the "hose end" of the uni-vac is much wider than typical hoses, and so if you plan to use it with a typical shop vac or Festool dust extractor hose, you need to come up with an adapter to connect the hose to the uni-vac.

Fast cap should provide an adapter with the product.
« Last Edit: September 19, 2022, 04:41 PM by ChuckS »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.