Author Topic: CT MIDI I HEPA connecting to Oneida Dust Deputy  (Read 295 times)

0 Members and 1 Guest are viewing this topic.

Offline FesDude

  • Posts: 2
CT MIDI I HEPA connecting to Oneida Dust Deputy
« on: November 10, 2021, 05:08 PM »
Brand new CT MIDI and Dust Deputy Deluxe.  Now I need to hook them together and rather than stumble I though I'd ask the experts.  What should I use to connect to Festool hose that's connected to my Sander, etc. to the Dust Deputy?  And what should I use to connect the Dust Deputy to the Extractor?  Any advice including names or links of specific parts would be appreciated.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Steve1

  • Posts: 119
Re: CT MIDI I HEPA connecting to Oneida Dust Deputy
« Reply #1 on: November 10, 2021, 06:12 PM »
I thought the "delux" version came with the casters, extra bucket and hoses.
That's what I got, and my tool hoses (all already sized to fit my CT36) fit the Dust Deputy connections without any adapters.

Offline FesDude

  • Posts: 2
Re: CT MIDI I HEPA connecting to Oneida Dust Deputy
« Reply #2 on: November 16, 2021, 11:50 AM »
It came with casters, extra bucket, hose...
I didn't state my question clearly.  The hose that came with the Dust Deputy doesn't fit into the dust extractor.  The hose that came with the CT MIDI uses a friction connection - no thread.  The dust deputy hose is also too short - I want to put the DD on top of my CT MIDI. 
So - Where can I get a 4 foot hose and what can I use to attach it to the CT MIDI?  I've looked at Rockler - they have a 20 foot hose that comes with 5 different fittings and one of those fittings does fit the CT MIDI.  But it costs about $55 for the one fitting I want and leaves me with about 16 feet of hose and 4 fittings I don't want.  That's too steep for 1 fitting.  I didn't see anything at Home Depot or Lowes.  I'm sure somebody out there has done this - what did you use?