Author Topic: Another FOG  (Read 6014 times)

0 Members and 1 Guest are viewing this topic.

Offline richard.selwyn

  • Posts: 635
Another FOG
« on: March 17, 2008, 08:02 AM »
Re: what else you have in your shop:
I'm a member of another FOG - the Felder Owners Group forum (on Yahoo) and a couple of members have recently said that they've become hooked on Festools. (as I am afraid is the case with me)
As a Felder owner I would say that some of their machines - for instance a jointer planer - would be a good upgrade for Festool owners.  They are all AINA, but are quite pricey.  They have a less expensive brand - Hammer and an industrial range which tries to compete with Martin and Altendorf.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Dan Clermont

  • Festool Dealer
  • *
  • Posts: 1134
  • Canadian Festool Dealer
    • Ultimate Tools
Re: Another FOG
« Reply #1 on: March 17, 2008, 11:54 AM »
LOL !!! Thanks for letting me know about the Felder version of the FOG  ;D

I need a jointer ... just a little tight for cash right now. What i would really is a jointer which could sit on the north end of my MFT and below the height of the MFT so it wouldn't interfere with large pieces on the MFT.

My wife doesn't know this about me but when we get that bigger house with a dedicated shop I've already made plans for a Felder combo machine. I'd appreciate it if you guys kept that quiet as well  ;)

Sure am glad Mathew created this site as I much prefer the dedicated FOG over the Yahoo version. Find much easier to follow

Dan Clermont
LARGEST FESTOOL SELECTION IN BC!
https://www.ultimatetools.ca/
604.291.9663

Offline Matthew Schenker

  • Posts: 2619
Re: Another FOG
« Reply #2 on: April 03, 2008, 10:03 PM »
Richard,
I'm glad you mentioned the Felder Owners Group.  When I was establishing the Yahoo phase of this forum, the people who run the Felder group were really friendly at helping me with advice and ideas.

I don't own any Felder machines -- my shop is too small to accomodate them!  But I've always been impressed with Felder machines when I've seen them at woodworking shows.  And I've always held very positive feelings about the friendly people who run the Felder Owners Group.

As a matter of fact, even though he hasn't posted, John Renzetti, one of the main players in the Felder Owners Group, is a member of this forum.

Matthew
FOG Designer and Creator

Offline Dan Clermont

  • Festool Dealer
  • *
  • Posts: 1134
  • Canadian Festool Dealer
    • Ultimate Tools
Re: Another FOG
« Reply #3 on: April 04, 2008, 06:08 PM »
Richard,
I'm glad you mentioned the Felder Owners Group.  When I was establishing the Yahoo phase of this forum, the people who run the Felder group were really friendly at helping me with advice and ideas.

I don't own any Felder machines -- my shop is too small to accomodate them!  But I've always been impressed with Felder machines when I've seen them at woodworking shows.  And I've always held very positive feelings about the friendly people who run the Felder Owners Group.

Matthew

My shop is also too small as well although I've eyed up the 500 series and dreamed about a larger shop someday.

I like the european view on safety which is one reason why I like my Festools. I get that same feeling from the Felder combo machines as well

Dan CLermont
LARGEST FESTOOL SELECTION IN BC!
https://www.ultimatetools.ca/
604.291.9663

Offline Allen Akin

  • Posts: 27
Re: Another FOG
« Reply #4 on: April 05, 2008, 08:16 PM »
I was a Felder owner before I bought my first Festools.  Jerry Work's postings are largely responsible for the latter.  :D

Getting the big machines into small spaces can be a challenge.  I documented mine here.

It's nice to have both sets of tools.  The Felder makes projects with big batches of similar parts fast and easy, and of course the shaper and planer/jointer are unbeatable for their special purposes.  The Festools are portable and versatile and accurate, and I use them heavily for one-of-a-kind projects.

By the way, John Renzetti just returned from his (final) tour of duty in Iraq.  Thanks for your service, John!

Allen

Offline ccmviking

  • Posts: 411
    • Blue River Cabinetry Kitchen and Bath
Re: Another FOG
« Reply #5 on: May 20, 2008, 10:35 PM »
John R.,

Thank you for your service Sir!.  It's greatly needed, and very much appreciated. 

Chris...


Offline gmccastle

  • Posts: 1
Re: Another FOG
« Reply #6 on: May 01, 2012, 02:21 PM »
does anyone know how to get in contact with John Renzetti........my father passed and I am told John may be able to help sell his Felder equipment.

Offline Allen Akin

  • Posts: 27
Re: Another FOG
« Reply #7 on: May 01, 2012, 06:01 PM »
Not sure I should post his email address; might increase the amount of spam he has to handle.

If it's OK with you, I can send your address to him.

Allen

Offline alex946

  • Posts: 65
    • alex946.ru
Re: Another FOG
« Reply #8 on: May 02, 2012, 09:18 AM »
Heh... Felder... not only the jointer
/dev/brain, /dev/hands, /dev/tools