Author Topic: What other tools do you have that come in systainers  (Read 4048 times)

0 Members and 1 Guest are viewing this topic.

Offline bearpaw

  • Posts: 27
What other tools do you have that come in systainers
« on: October 21, 2019, 08:53 PM »
Lets compare notes. What other tools come in systainers do you have?
Cadex has a nail gun in a systainer and a great little 3.6 cfm @ 90psi with a 60% duty cycle in a systainer. ( on sale half price until they are sold out, 6 left)I also have a spax screw assortment in a Systainer. Since woodcraft started selling them I have all kinds of colorful boxes. [big grin]

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline CarlsonCarpentry

  • Posts: 128
Re: What other tools do you have that come in systainers
« Reply #1 on: October 21, 2019, 09:16 PM »
I have a Fein fm350q in a Fein systainer and my Mirka Deros came in one as well. Here in the USA I don’t see a lot of companies selling in systainers. My Makita tracksaw came in a “classic”.

I’ve seen the Cadex guns at woodcraft but the reviews don’t seem to be able to justify a $300 brad nailer that doesn’t preform and better than a $50.

Offline PeterJJames13

  • Posts: 255
Re: What other tools do you have that come in systainers
« Reply #2 on: October 22, 2019, 12:45 AM »
A Fein Multimaster, my Lamello biscuit jointers (and some anniversary zeta sets), all my Mafell items, Shaper Origin, Rol Air compressor, some jigs (I can't think of the names now), and my Bosch 12 volt multi head drill. Shockingly, no Mirka sanders yet...
« Last Edit: October 22, 2019, 12:47 AM by PeterJJames13 »

Offline Cheese

  • Posts: 10173
Re: What other tools do you have that come in systainers
« Reply #3 on: October 22, 2019, 11:35 AM »
A Shaper Origin and Mafell tools along with:

A Fein Multimaster in a Sys 2




Woodpeckers Gauge Blocks in 2 layers






Woodpeckers Corner Radius jigs in 2 layers






Woodpeckers DF 500 Offset Base

« Last Edit: October 22, 2019, 12:47 PM by Cheese »

Offline PeterJJames13

  • Posts: 255
Re: What other tools do you have that come in systainers
« Reply #4 on: October 22, 2019, 11:38 AM »
@Cheese Yes! I forgot some Woodpeckers items come in systainers. Super handy for finding them over the regular plastic boxes they use.

Offline PeterJJames13

  • Posts: 255
Re: What other tools do you have that come in systainers
« Reply #5 on: October 22, 2019, 11:43 AM »
@Cheese Yes! I forgot some Woodpeckers items come in systainers. Super handy for finding them over the regular plastic boxes they use.

Ya Peter I'm trying to post some photos but the forum software is having a bad day.  [eek]

@Cheese I'm not the biggest Tapatalk fan, but I'm learning the easiest way to post photos here is through Tapatalk. It generally will shrink files down to a manageable size (these smartphones take pics that are HUGE in size), and they seem to orient them properly for me as well.

Offline Cheese

  • Posts: 10173
Re: What other tools do you have that come in systainers
« Reply #6 on: October 22, 2019, 11:48 AM »
@Cheese I'm not the biggest Tapatalk fan, but I'm learning the easiest way to post photos here is through Tapatalk. It generally will shrink files down to a manageable size (these smartphones take pics that are HUGE in size), and they seem to orient them properly for me as well.

Hey Peter, I have a normal protocol I follow when I post photos. I initiated it about 2+ years ago and it's worked every time. Today however, no-workee.

Offline PeterJJames13

  • Posts: 255
Re: What other tools do you have that come in systainers
« Reply #7 on: October 22, 2019, 11:50 AM »
@Cheese - ugh I'm sorry.

Offline Birdhunter

  • Posts: 3915
  • Woodworker, Sportsman, Retired
Re: What other tools do you have that come in systainers
« Reply #8 on: October 22, 2019, 02:17 PM »
Mafell DD40 Doweler various Woodpecker sets.
Birdhunter

Offline demographic

  • Posts: 755
Re: What other tools do you have that come in systainers
« Reply #9 on: October 22, 2019, 02:43 PM »
Think the only ones that I've bought that came with a systainer have either been Festool, TS55 and HKC, was a Metabo jigsaw.

I do however have an orange BTI fixings box which is a T-Loc size 1.
Oh and I've just bought a Panasonic T-Loc size 4 box.

Part of the reason for buying different boxes is its simpler to see at a glance whats what but a side benefit is that it stops me from looking like a right fanboi.

Offline Cheese

  • Posts: 10173
Re: What other tools do you have that come in systainers
« Reply #10 on: October 22, 2019, 04:18 PM »
@Cheese - ugh I'm sorry.

@PeterJJames13 I found the very first photo I tried to post was 4000 x 3000 pixels and that prevented all of the other photos from loading/posting.  [crying]

I reduced the size of the first photo down to 2000 x 1500 pixels and then all 6 of the photos posted fine. Who'd have thunk.   [embarassed]

Offline usernumber1

  • Posts: 242
Re: What other tools do you have that come in systainers
« Reply #11 on: October 22, 2019, 04:21 PM »
mirka sanders are in sys2

Offline PeterJJames13

  • Posts: 255
Re: What other tools do you have that come in systainers
« Reply #12 on: October 22, 2019, 04:32 PM »
@Cheese with these newer phones and better cameras, comes higher image sizes. Can be a bad thing at times! Besides, nobody needs to see THAT high a resolution pic of me anyway ;-)

Offline Gregor

  • Posts: 1769
Re: What other tools do you have that come in systainers
« Reply #13 on: October 22, 2019, 05:25 PM »
Apart from the Multimaster a Schneider Systainer compressor (and some Nailers that came with it).

I also have a nice (unlimited) china clone of that round corner jig, though that came without a systainer (but for only 30 bucks or so, incl. shipping).

Offline Jiggy Joiner

  • Posts: 1111
Re: What other tools do you have that come in systainers
« Reply #14 on: October 22, 2019, 05:48 PM »
My Mafell tools, some of my Fein tools, and some TSO tools.

Online mrB

  • Posts: 930
Re: What other tools do you have that come in systainers
« Reply #15 on: October 22, 2019, 06:04 PM »
I was pleased as punch to get this one a couple years back.

 https://i.pinimg.com/originals/af/ce/00/afce005f53b62761475b417ffb86a6f5.jpg

Sorry not sure how to paste image directly.
there's nothing like the right tool for the job

Offline notenoughcash

  • Posts: 244
  • too many ideas, not enough cash....
Re: What other tools do you have that come in systainers
« Reply #16 on: April 28, 2020, 12:24 PM »
all my makita gubbins come in original systaners/mackpacks.  cant wait to get my hands on some t-loc's
turns out that woodworking is 1% making things you'll use, 4% making bespoke high end firewood, 15% cleaning, and 80% looking for the blinking thing you just put down
PSC 420 EB, TSC 55 REB, CTL MIDI I

Offline craigsalisbury75

  • Posts: 27
Re: What other tools do you have that come in systainers
« Reply #17 on: May 03, 2020, 12:18 PM »
My Lamello Zeta P2 came in a systainer as well as the connectors.

Offline Bert Vanderveen

  • Posts: 896
Re: What other tools do you have that come in systainers
« Reply #18 on: May 03, 2020, 12:52 PM »
From Bessey: one with bench- and toggle clamps and accessories, one with KliKlamps (which is now used for Gorilla Clamps, the Kli’s are on a rack).
From Schneider Airsystems: one Sys5 with a compressor, one Sys1 with hose and such.
From GereedschapPro (shop in the Low Countries): micro-systainer with First Aid stuff (which I used today, bc I stuck a blade in a fingertop).
Cheers, Bert Vanderveen

TS55 · TS55R · OF1010 · DF500 · MFT/3 + TSB1-MW 1000 + VL + CMS TS55 + CMS PS300 + LA-CS 70/CMS · CTL Midi · RTS400 · 2 x CXS Li 1,5 · T15+3 Li 4,2 · TI15 Impact Li 4,2 · Centrotec Sets 2008 + 2015 · PSB300 · LR32-SYS · RO150 · KS120 · 2 x MFK700 · RO90 · OFK700 · BS75 · OFK500 · OF2200 · CMS-GE · Vecturo 18 Li · TID 18 · TKS 80 EBS-Set · DTS 400 · ETS EC 125 w 150 pad · Surfix Set · CTL SYS · CT-VA-20 · … | Mirka 1230L P&C | Hammer: A3 31 Silent Power · N4400 · HS950 | TaigaTools: VacPods Pro Set
On order: … [ ! ]