Author Topic: Milwaukee M18 Plunge router  (Read 1358 times)

0 Members and 1 Guest are viewing this topic.

Offline Samo

  • Posts: 649
Milwaukee M18 Plunge router
« on: November 20, 2022, 02:30 PM »
I'm thinking of adding this to my cordless stuff?  Nothing really unsponsored that I've seen out there for reviews.

Does anybody use this plunge base that can comment?

Thanks, Sam
It's The FOG!  Just rotate the screen.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline rst

  • Posts: 2882
Re: Milwaukee M18 Plunge router
« Reply #1 on: November 20, 2022, 02:45 PM »
I've had the router for some time now, just bought the plunge mechanism, haven't tried yet.  Router is great, can't imagine the plunge is not good.

Offline Michael Kellough

  • Posts: 5863
Re: Milwaukee M18 Plunge router
« Reply #2 on: November 20, 2022, 02:57 PM »
I have the M18 router but not the plunge base.

I like the Milwaukee cordless router better than the equivalent Makita.
The Makita’s rack and pinion depth adjustment is frustrating.
The Milwaukee depth adjustment via threaded rod is far superior.

The Milwaukee also seems to be a better value, especially now (BLACK Fridaymonth).
You can get the basic router and two 5 amp batteries (and charger) for $199 at HD.

Offline rvieceli

  • Posts: 1846
Re: Milwaukee M18 Plunge router
« Reply #3 on: November 20, 2022, 04:10 PM »
If you have enough batteries and chargers, it is possible to get the router for $99.50 at the Home Depot.

The buy the 5.0 battery starter kit and get a free tool puts the tool and batteries in the cart and gives them each a separate entry and sku, as a result it prorates the return value of each tool. This is to prevent people from buying the starter kit and the free tool and then returning the starter kit for the full value and keeping the free tool.

Easiest if you have a nearby HD with stock is go to the store grab a starter pack and the router. Pay. Exit the store, stop by your vehicle and drop off the router. Go back inside to the service desk and return the starter kit.

Works without hassle.

Ron

Offline RJNeal

  • Posts: 605
Re: Milwaukee M18 Plunge router
« Reply #4 on: November 20, 2022, 08:23 PM »
Samo.
I recently pick up a fix base two months ago and liked it so much I picked up another one Black Friday deal at HD. I figured I just leave a round over bit in one and change bits in the other.
I know your asking about the plunge base. I’m looking to add that soon.I really like the router.
I starting to fill in the voids with Milwaukee.
I have light, small blower to blow off the tools before returning the tools to the truck, and the twins routers.
Looking to pick up the cordless plane real soon.
Rick.
Have you walked your saw today?

Offline Vtshopdog

  • Posts: 189
Re: Milwaukee M18 Plunge router
« Reply #5 on: November 20, 2022, 10:40 PM »
I’ve had the router for a couple years and the plunge base since spring. 
Have not used the plunge a ton but it’s very smooth and depth fine adjust suits my needs very well. I like it better than my other routers but have a limited selection of 1/4” bits and end up using the other machines more for this reason. 
(Might need to buy more bits for it, it’s a really nice setup)

Offline rst

  • Posts: 2882
Re: Milwaukee M18 Plunge router
« Reply #6 on: November 21, 2022, 08:44 AM »
Off topic but the Milwaukee blowers are great for blow drying vehicles for detailing

Offline rvieceli

  • Posts: 1846
Re: Milwaukee M18 Plunge router
« Reply #7 on: November 21, 2022, 09:13 AM »
@rst blower is also good for cleaning the shop if you can blow towards the door.  [tongue]

Ron

Offline Samo

  • Posts: 649
Re: Milwaukee M18 Plunge router
« Reply #8 on: November 21, 2022, 09:25 PM »
Samo.
I recently pick up a fix base two months ago and liked it so much I picked up another one Black Friday deal at HD. I figured I just leave a round over bit in one and change bits in the other.
I know your asking about the plunge base. I’m looking to add that soon.I really like the router.
I starting to fill in the voids with Milwaukee.
I have light, small blower to blow off the tools before returning the tools to the truck, and the twins routers.
Looking to pick up the cordless plane real soon.
Rick.

Hey Rick,
Hope you are doing well.  Happy Holidays to you and yours!
We must think alike.  One with a 3/8" round-over bit.  One with a 1/2" mortise bit and 5/8" template guide. 
Sometimes I need to make a quick template onsite and was looking at the plunge base.
Just hard to get real answers with all the fake info these days.

Cheers, Sam
It's The FOG!  Just rotate the screen.

Offline RJNeal

  • Posts: 605
Re: Milwaukee M18 Plunge router
« Reply #9 on: November 21, 2022, 09:40 PM »
Thanks Sam. We’re doing pretty ok. Hope you and yours are also doing good.
Happy holidays.
These  cordless tool reliability is great.
I also like the light these routers have in them.
I started to somewhat look for plung base only but haven’t found one yet. I’ve only tried to look just a small bit.
I also just made a router insert for the fix base to nest in the skilsaw job site saw I use onsite.
It fits in the opening when you extends the table to the right for wide rips
Have you walked your saw today?

Offline rvieceli

  • Posts: 1846
Re: Milwaukee M18 Plunge router
« Reply #10 on: November 22, 2022, 06:17 AM »
@RJNeal Rick - Home Depot looks like they have the plunge available to order.

https://www.homedepot.com/p/Milwaukee-Compact-Router-Plunge-Base-48-10-5601/311594940

ROn

Offline RJNeal

  • Posts: 605
Re: Milwaukee M18 Plunge router
« Reply #11 on: November 22, 2022, 07:31 AM »
Thanks Ron your the best.
Season greetings.
Rick


@RJNeal Rick - Home Depot looks like they have the plunge available to order.

https://www.homedepot.com/p/Milwaukee-Compact-Router-Plunge-Base-48-10-5601/311594940

ROn
Have you walked your saw today?