Author Topic: Table saw noise  (Read 1360 times)

0 Members and 1 Guest are viewing this topic.

Offline chris s

  • Posts: 131
Table saw noise
« on: March 06, 2022, 09:06 AM »
I am thinking of downsizing my shop. One of the things I might swap out is my large grizzly table saw, Which I love because of it accuracy and quiet operation. I should also mention that I usually use  an 8 inch blade in it. I have been looking at the Skill 8 1/2 inch portable table saw. Does any know the noise level of it.  All the portable table saws I have seen are ear splitting noisy things. Any input will be appreciated thanks

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Kpp80202

  • Posts: 50
Re: Table saw noise
« Reply #1 on: March 06, 2022, 09:57 AM »
Just about every compact/portable job site saw uses a universal motor, which is super loud. Larger machinery uses an induction motor which is much quieter. I don’t think there are truly quiet options, but you may want to see what Makita offers; many of their tools are the quietest in the industry.
Trion
CT22E
CXS kit
ETS EC 150/3
FS1400/2-LR
FS-WA/90
TS55FEQ
FS1400/2

Sold: ATF55E, FS1400 (x2), Rotex

Offline Alex

  • Posts: 7798
Re: Table saw noise
« Reply #2 on: March 06, 2022, 09:59 AM »
You need one with an induction motor, they are much quieter than standard electric motors. Your Grizzly probably has one too, like most stationary saws. But most portable table saws don't have one and that's why they're louder.

I can't help you with recommending a model in the states. My Festool CS70 and the new TKS 80 have one though.

Offline FestitaMakool

  • Posts: 1336
Re: Table saw noise
« Reply #3 on: March 06, 2022, 01:25 PM »
That Skil saw sold incredible cheap here, further research revealed that it is extremely noisy.
Aside from that, it seems like a very very good saw for the money.

Festool’s table saws are very quiet. I don’t think my CS 50 has an universal motor, but it’s certainly one of the most quiet small table saws I’ve encountered.

Bosch’s XC is also reasonably quiet.
“The Stig” Yes, it is true, at least some part of it..
“If you have an old Land Rover and a fit wife, you’re most likely always busy”

Offline Rob Z

  • Posts: 1086
Re: Table saw noise
« Reply #4 on: March 06, 2022, 04:55 PM »
Chris

The portables all have those screaming motors (as has been noted), so one option for smaller/more portable than your Grizzly cabinet saw could be an old (1970's-1990's) Craftsman (don't laugh  [big grin] ). They were made in the US by Emerson, parts are plentiful, they are easy to repair, and they are readily available for sale on CL.  The motor hangs off the back and with a link belt they are fairly smooth and quiet. Even with the cast iron extensions (versus the steel) these things don't weigh more than (maybe?) 150 pounds. I had one years ago with a Vega fence on it and it was decent.

Offline chris s

  • Posts: 131
Re: Table saw noise
« Reply #5 on: March 09, 2022, 09:44 AM »
Rob Z   I had one of those old Craftsman saws, it was the one I learned on. When I upgraded to the Grizzly cabinet saw I passed it along to a friend who needed a saw for hi shop. It was indeed a good saw and still working to this day.