Author Topic: Cabinet for Homeowners Association Pool  (Read 1190 times)

0 Members and 1 Guest are viewing this topic.

Offline sandy

  • Posts: 115
Cabinet for Homeowners Association Pool
« on: June 21, 2019, 07:05 PM »
I live in a subdivision that has a pool and tennis courts. Our Homeowners Association wanted to provide the members with a freezer and a refrigerator to be kept at the pool, so they decided to find a cabinet shop to design and build one. When I learned what they wanted, I agreed to make the unit. I went out to the pool and measured the space that was available, and I measured the sizes of the freezer and refrigerator that they had purchased. In order to confirm that everything would fit properly, I first made the face frame. There was room to include a center section with adjustable shelves, and I constructed a door to go on that section. As the pool deck slopes, I made a base out of pressure treated 2×4’s for the cabinet to sit on. The rear of the base (nearest the brick wall) is “shorter” than the front of the base (nearest the front of the cabinet) to compensate for the slope of the deck. We used paint that matches the trim on the pool house, and we ordered a granite top. All in all it was an interesting build, and everyone is happy with the resulting cabinet (as well as the $1,000 plus savings over the quotes that had been received).

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline neilc

  • Posts: 2825
Re: Cabinet for Homeowners Association Pool
« Reply #1 on: July 07, 2019, 10:57 PM »
Looks nice, Sandy!

Offline jobsworth

  • Posts: 6196
  • Festool Baby.....
Re: Cabinet for Homeowners Association Pool
« Reply #2 on: July 08, 2019, 12:31 PM »
Nice work sandy.

I almost got into my HOA rant but deleted it and decided a "Nice work Sandy" would suffice [big grin]

Offline Bullhorn

  • Posts: 4
Re: Cabinet for Homeowners Association Pool
« Reply #3 on: July 08, 2019, 12:45 PM »
Clean work, well executed. Your neighbors owe you a few well-stocked barbecues.  :)

Offline ear3

  • Posts: 4043
Re: Cabinet for Homeowners Association Pool
« Reply #4 on: July 08, 2019, 01:18 PM »
Well done, and it integrates nicely with the other woodwork around the doors.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • AGC 18-115 • CT 26 w/BT module • CT Sys w/Long-Life Bag • MFT/3