Author Topic: Shed I built  (Read 2719 times)

0 Members and 1 Guest are viewing this topic.

Offline Kevin Johnson

  • Posts: 93
Shed I built
« on: May 30, 2008, 05:10 PM »
Hi,

Here are some pictures of a cedar shed that I built.  On this shed, the customer wanted beaded cedar siding so I ran the cedar siding through my router table to form the bead on the edge.

I made the window, the cupola, flower box and the doors in addition to framing and everything else.  On the doors, I had wished I had a domino, but that wasn't in the budget.  So I clamped the stiles to the side of an MFT and routed mortises for loose tenons.  I of course, did the same thing for the rails.  I used the TS 55 to cut the cupola from MDO and applied cedar to it.

The door lock was a full mortise lock set and I used the OF 1400 to plunge route the mortise for that.

8576-0
8578-1
8580-2
8582-3
8584-4
8586-5


Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Tom Bainbridge

  • Posts: 1009
  • Limey Carpenter
Re: Shed I built
« Reply #1 on: May 30, 2008, 05:23 PM »
kevin

working in minature makes the task that bit more exacting

this is the sort of project apprentice carpenters ought to be given, it teaches almost all the techniques needed to build a house

good work   
Bromley, Kent. UK

aka dirtydeeds

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 9228
  • Finger Lakes Region, NY State , USA
Re: Shed I built
« Reply #2 on: May 30, 2008, 11:22 PM »
Hi,

  Cool doors.  Is the shed about 4' x 8'?

Seth

Offline Kevin Johnson

  • Posts: 93
Re: Shed I built
« Reply #3 on: May 31, 2008, 06:09 AM »
Thanks for the compliments. The shed is 6x10.

Offline poto

  • Posts: 408
Re: Shed I built
« Reply #4 on: May 31, 2008, 08:07 AM »
Great job! You should consider making play houses for kids. And I liked the gratuitous inclusion of the Systainer in the shot!