Author Topic: Pub Table  (Read 3609 times)

0 Members and 1 Guest are viewing this topic.

Offline BIP

  • Posts: 34
Pub Table
« on: May 10, 2015, 05:42 AM »
[ Specified attachment is not available ]Recently completed this pub height table for our family room.  It is made out of 1 1/4" quarter sawn white oak and the joints are mortise/tenon pinned with dowels.  It was stained to match some of the other woodwork in the house and six coats of polyurethane.

Now all it needs is to be christened with a couple of pints of Guiness...


Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline rich024

  • Posts: 50
Re: Pub Table
« Reply #1 on: May 10, 2015, 07:08 AM »
Beautiful table.  Nice work!

Offline rnt80

  • Posts: 953
    • Agape Wood Design
Re: Pub Table
« Reply #2 on: May 10, 2015, 08:41 AM »
Love the gentle curves. Nice job!
Russell Tribby
Gilbert AZ
www.agapewooddesign.com

Offline Acrobat

  • Posts: 469
Re: Pub Table
« Reply #3 on: July 27, 2015, 11:46 PM »
Beautiful work. Love the gentle curves.
Don't make the mistake of going anywhere near the black stuff, its horrible, stick to a good lager [big grin]
Don't wake me, I'm livin' the dream!

Offline roblg3

  • Posts: 751
  • Transforming into a whole new machine
Re: Pub Table
« Reply #4 on: July 27, 2015, 11:58 PM »
I see space for a spitoon right in the center of where the legs for the X!?? [wink]
Rob Gardner
Operator
RL3 Enterprises

Offline BIP

  • Posts: 34
Re: Pub Table
« Reply #5 on: July 31, 2015, 08:52 AM »
I don't think the missus would approve that modification.

Offline Crox G

  • Posts: 91
Re: Pub Table
« Reply #6 on: July 31, 2015, 09:39 AM »
What is "pub height"?  I will asssume it's the height of one's horizontal forearms, with hands surrounding a pint (proper 20-oz) of Guiness or Old Peculier, leaning forward and resting on the table, while seated in a well-patinated Windsor chair.  What are your Metric and Imperial measurments?   [big grin] [wink]

You're making me thirsty.

Cheers,
Crox
CT Midi, ETS 150/3, OF 1400, TS 55, CXS, RO 90, MF-TB, Syslite, necktie, T18 + 3, Carvex PSC 420 EB, Ti15, Domino XL 700, Vecturo

Offline Dogberryjr

  • Posts: 143
Re: Pub Table
« Reply #7 on: July 31, 2015, 11:21 AM »
I quite like this!

Offline BIP

  • Posts: 34
Re: Pub Table
« Reply #8 on: August 31, 2015, 06:15 PM »
What is "pub height"?  I will asssume it's the height of one's horizontal forearms, with hands surrounding a pint (proper 20-oz) of Guiness or Old Peculier, leaning forward and resting on the table, while seated in a well-patinated Windsor chair.  What are your Metric and Imperial measurments?   [big grin] [wink]

You're making me thirsty.

Cheers,
Crox

I believe I made this 41" (possibly 42" my CRS flares up sometimes) so a person could stand and lean or sit on a stool.

Offline Chris Wong

  • Festool Dealer
  • *
  • Posts: 878
  • I make things that challenge me.
    • Flair Woodworks
Re: Pub Table
« Reply #9 on: August 31, 2015, 11:16 PM »
Nice design!
Chris Wong, http://FlairWoodworks.com
First Festool was a free pencil.
Shipping live-edge cribbage boards around the world since 2010.

Offline Alex

  • Posts: 6191
Re: Pub Table
« Reply #10 on: September 01, 2015, 04:22 AM »
Now all it needs is to be christened with a couple of pints of Guiness...

The whole FOG is lining up to help you out with that one.

Offline Kev

  • Posts: 7652
Re: Pub Table
« Reply #11 on: September 01, 2015, 05:01 AM »
Can you just move it a little bit towards Australia, my elbow can't quite reach [wink]