Author Topic: H&K Custom Barn Doors  (Read 66315 times)

0 Members and 1 Guest are viewing this topic.

Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #240 on: July 23, 2019, 07:13 AM »
Two large shaker style doors built and installed in Frisco, TX...

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #241 on: July 30, 2019, 11:45 PM »
Barn door install today in Plano, TX...

Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #242 on: July 30, 2019, 11:47 PM »
Herringbone accent wall installed today in Plano, TX...

Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #243 on: August 14, 2019, 09:44 AM »
Currently working on 14 doors...here are three that will be installed this weekend...

Offline jobsworth

  • Posts: 5797
  • Festool Baby.....
Re: H&K Custom Barn Doors
« Reply #244 on: August 14, 2019, 11:11 AM »
Dumb question for ya FIVEO,

What length do you make yer doors to?

Thanks

Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #245 on: August 14, 2019, 03:19 PM »
No such thing as the dumb question...I mainly do higher end homes so most of my doors are custom sizes for the opening.   These are 8’ tall

Offline jobsworth

  • Posts: 5797
  • Festool Baby.....
Re: H&K Custom Barn Doors
« Reply #246 on: August 14, 2019, 05:38 PM »
My bud in Oregon wanted me to build him a couple for his bed room when i was there. He got some interior off the shelf doors and hung them. He said they were a bit long and he wanted them a tad shorter.
I never got around to building them. So I was curious whether there was a rule of thmb on the length. Since these were bedroom doors, I was going to make them out of Alder use some danish oil to make the grain pop and darken over time, for the inside panel I was going to put a mirror in.

Anyway thanks

Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #247 on: August 18, 2019, 06:20 PM »
Installed yesterday in McKinney, TX...


Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #248 on: August 21, 2019, 08:32 PM »
Have several more cool doors that I installed this past weekend but unable to load anymore pics... [sad]

Offline jobsworth

  • Posts: 5797
  • Festool Baby.....
Re: H&K Custom Barn Doors
« Reply #249 on: August 22, 2019, 07:27 PM »
to bad I like those photos odf yours

Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #250 on: August 23, 2019, 10:09 AM »
Yeah, looks like there is a cap on posting pictures

Offline jobsworth

  • Posts: 5797
  • Festool Baby.....
Re: H&K Custom Barn Doors
« Reply #251 on: August 23, 2019, 12:03 PM »
really? that sucks.

I noticed that last photo was for McKinney. Did you build them for relocated Californians? I belong to a facebook group "move to texas from California.

Theres a lot moving to that area. they seem to really like the DFW and Austin areas. Mentioned McKinney quite a few times.

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 12006
  • MacGyver - My boy 2010 - 2019 RIP
Re: H&K Custom Barn Doors
« Reply #252 on: August 23, 2019, 01:41 PM »
Have several more cool doors that I installed this past weekend but unable to load anymore pics... [sad]

Why don't you send me a PM with detailed information.  I am not aware of any limitations, but the forum software was recently updated and there are ton of variables to be looked at.  It is a glitch I suspect.

Peter Halle - Moderator

Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #253 on: September 01, 2019, 09:23 PM »
Installed in McKinney, TX...

Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #254 on: September 01, 2019, 09:27 PM »
Installed in Justin, TX...

Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #255 on: September 01, 2019, 09:32 PM »
Custom vanity installed for a client in Justin, TX...

Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #256 on: September 05, 2019, 10:57 PM »
Installed in Frisco, TX...

Offline TXFIVEO

  • Posts: 287
Re: H&K Custom Barn Doors
« Reply #257 on: September 10, 2019, 10:28 PM »
Installed three barn doors today in Frisco, TX...these two beauties are 9’ tall and 7’ wide...EACH!