Author Topic: H&K Custom Barn Doors  (Read 112475 times)

0 Members and 1 Guest are viewing this topic.

Offline jobsworth

  • Posts: 6724
  • Festool Baby.....
Re: H&K Custom Barn Doors
« Reply #360 on: June 06, 2020, 11:49 PM »
cool, looks like Ill be getting the festool bit thanks, [thumbs up] [thumbs up]

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #361 on: June 07, 2020, 11:13 PM »
GIGANTIC reclaimed barn wood doors ready for install...these are 12’ tall and 5’ wide...EACH!!

Offline jobsworth

  • Posts: 6724
  • Festool Baby.....
Re: H&K Custom Barn Doors
« Reply #362 on: June 08, 2020, 10:59 AM »
Man those are huge doors.

Do you realise that this thread you started has over 370 post and 82,700 views????

Well done buddy

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #363 on: June 09, 2020, 08:20 PM »
Man those are huge doors.

Do you realise that this thread you started has over 370 post and 82,700 views????

Well done buddy

Thank you. This site is such and awesome place to learn and get ideas.  I’ve learned so much.

Here is another door built and installed in Allen, TX...

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #364 on: June 29, 2020, 09:07 PM »
Been a busy couple of months but finally all moved into the new shop...have about 20 doors to do but here are two just about done...knotty alder slant door and a three panel frosted glass door...

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #365 on: June 30, 2020, 07:09 PM »
Modern (4) Panel Shaker Door built and installed in Nevada, TX...


Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #366 on: July 02, 2020, 07:47 PM »
Knotty Alder slant door built and ready for install...

Offline jobsworth

  • Posts: 6724
  • Festool Baby.....
Re: H&K Custom Barn Doors
« Reply #367 on: July 02, 2020, 07:51 PM »
I like that one Knotty Alder is one of my Favs wood

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #368 on: July 04, 2020, 01:10 PM »
Happy 4th of July from the great state of TEXAS...


Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #369 on: July 06, 2020, 05:17 PM »
Knotty Alder Slant Door built and installed in McKinney, TX...

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #370 on: July 07, 2020, 01:23 PM »
Frosted glass door built and installed in Celina, TX...

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #371 on: July 08, 2020, 04:54 PM »
Knotty Pine Herringbone Doors ready for pickup...

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #372 on: July 10, 2020, 07:17 AM »
Wrapping door casing with reclaimed barn wood before this weekend’s reclaimed barn wood doors installation...

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #373 on: July 11, 2020, 07:47 PM »
Reclaimed barn wood doors installed...

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #374 on: July 13, 2020, 08:33 PM »
Modern doors in the works...


Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #375 on: July 15, 2020, 08:48 PM »
Festool swag arrived today...

Offline jobsworth

  • Posts: 6724
  • Festool Baby.....
Re: H&K Custom Barn Doors
« Reply #376 on: July 15, 2020, 10:03 PM »
Maybe Ill be getting mines soon..... [tongue]

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #377 on: July 25, 2020, 11:16 PM »
Diamond Door setup installed today in Highland Village, TX....8’ tall and 10’ wide!

Offline HowardH

  • Posts: 1339
Re: H&K Custom Barn Doors
« Reply #378 on: July 27, 2020, 04:17 PM »
Holy cow that's a lot of dominos! 
Howard H
The Dallas Texas Festool Fanatic!

Mark Twain:  "I didn't attend the funeral, but I sent a letter approving of it." "If you tell the truth you don't have to remember anything."

mft1080, P1cc, MFT/3, T15, TID-18, RO150FEQ, MT55cc, RTS400, CT22, CT36E, 800, 1080, 1400, 1900 rails, OF 2200, OF1400, CSX, C18, VacSys, Vecturo, Qwas dogs, Parf Dogs, Zobo's, Syslite Uni, CMS GE. Mafell DDF40, Sawstop contractor, PM 1500, Shaper Origin. Felder AF-14

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #379 on: July 29, 2020, 11:10 PM »
Holy cow that's a lot of dominos!

No Dominos were used on this setup...but the domino does have its work cut out for it...28 doors in the works!

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #380 on: August 06, 2020, 04:36 PM »
With 29 doors in the works had to get the 40x30 shop spray foamed...

https://www.facebook.com/1724637814438320/posts/2955326181369471/?vh=e

Offline DynaGlide

  • Posts: 1076
Re: H&K Custom Barn Doors
« Reply #381 on: August 07, 2020, 02:11 PM »
@TXFIVEO Going to be putting two doors that meet in the middle to replace two hinged doors. I'll be using off the shelf/store bought doors and hardware. Any words of wisdom?
Instagram @matts.garage

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #382 on: August 07, 2020, 09:05 PM »
Good evening.  I would use two tracks, one for each door with the track meeting in the center of the opening.  Leave about 1/8” space between the two tracks so when you mount the doors and close them to meet in the middle you have “adjustment” if you need it.  You want this so both doors meet perfectly in the middle. 

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #383 on: August 09, 2020, 04:56 PM »
Bypass raised panel doors built and installed in McKinney, TX...

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #384 on: August 13, 2020, 09:44 PM »
Finishing up these 8 sliding barn doors going into a wedding venue near Denton, TX....these are 10’ tall and 4’ wide...EACH!
« Last Edit: August 13, 2020, 09:50 PM by TXFIVEO »

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #385 on: August 15, 2020, 09:32 PM »
“Reverse Diamond” doors installed in Flower Mound, TX...

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #386 on: August 18, 2020, 06:42 PM »
8 doors built and installed in Collinsville, TX for a cool French Farmhouse Venue....each door is 10’ tall and 4’ wide!


Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #387 on: August 20, 2020, 08:37 PM »
Two huge reclaimed barn wood doors built and installed in a winery in Wylie, TX...these are 12’ tall and 5’ wide...EACH!

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #388 on: August 24, 2020, 07:30 PM »
Johnny Cash X Door built and installed in Anna, TX....

Offline TXFIVEO

  • Posts: 534
Re: H&K Custom Barn Doors
« Reply #389 on: August 26, 2020, 02:44 PM »
Knotty Alder “X” door built and installed in Frisco, TX...