Author Topic: Federal Inspired Huntboard  (Read 1699 times)

0 Members and 1 Guest are viewing this topic.

Offline atogrf1

  • Posts: 154
  • FESTOOL
Federal Inspired Huntboard
« on: July 29, 2019, 02:00 PM »
I will post better pictures when I have some taken. Thank you all for following along during the build. If you follow the hashtag #federalhuntboard on Instagram you will see the step-by-step photos of the build. The primary wood is Sapele Mahogany. The drawer heads, door panels, and side panels are Waterfall Bubinga. The oval inlay in the backsplash and leg inlay is Tiger Maple. The banding is directional and run in opposite directions from the Wenge keyway at the center. The oval fans and stringing is Pale Sycamore. The cuffs at the bottom of the legs is Pale Sycamore and Wenge. As always, the hardware is Horton Brasses but the finials are antiques that I picked up. Coated with 4 coats of General Finishes Arm-R-Seal and topped off with Renaissance Wax. Feel free to contact me if you have any questions. Thanks for looking.
For those interested, my Instagram is nicholas.vanaria

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Jiggy Joiner

  • Posts: 1025
Re: Federal Inspired Huntboard
« Reply #1 on: July 29, 2019, 03:12 PM »
That is stunningly beautiful!
Very, very nice piece  [not worthy] [thumbs up]

Offline atogrf1

  • Posts: 154
  • FESTOOL
Re: Federal Inspired Huntboard
« Reply #2 on: July 29, 2019, 04:06 PM »
Thank you VERY much Jiggy!!!!

Re: Federal Inspired Huntboard
« Reply #3 on: July 29, 2019, 05:22 PM »
That is a great piece, great proportion’s, wonderful accents very nicely done!

Offline atogrf1

  • Posts: 154
  • FESTOOL
Re: Federal Inspired Huntboard
« Reply #4 on: July 29, 2019, 07:21 PM »
Thank you Belle City!!!!  I appreciate your kind words.

Offline atogrf1

  • Posts: 154
  • FESTOOL
Re: Federal Inspired Huntboard
« Reply #5 on: April 27, 2020, 11:03 PM »
I am proud to say that my Huntboard will be in this month's issue of WOOD magazine.  I am honored and humbled.

Offline deepcreek

  • Posts: 906
    • TimberFire Studio
Re: Federal Inspired Huntboard
« Reply #6 on: April 27, 2020, 11:23 PM »
Congratulations!
Joe Adams
TimberFire Studio
Houston, Texas

http://www.facebook.com/timberfire

Offline Blues

  • Posts: 53
Re: Federal Inspired Huntboard
« Reply #7 on: April 27, 2020, 11:26 PM »
Amazing. Looks awesome. Lots of love has gone into the build.
Thanks for sharing.

Offline mrFinpgh

  • Posts: 382
Re: Federal Inspired Huntboard
« Reply #8 on: April 27, 2020, 11:43 PM »
Well deserved. Beautiful piece.

Offline atogrf1

  • Posts: 154
  • FESTOOL
Re: Federal Inspired Huntboard
« Reply #9 on: April 28, 2020, 07:07 AM »
Thank you VERY much!!!!

Offline Thompmd

  • Posts: 82
Re: Federal Inspired Huntboard
« Reply #10 on: April 28, 2020, 07:44 AM »
Omg, you did a beautiful job!! BTW, I’m a Jr Festoolian and o copied your license plate and sent to my buddy.
Sawstop Industrial Saw, TS75,2 1400 rails, CT36, Rotex RO 150 FEQ, CT-VA-20, Carvex PS 420 EBQ, Carvex acc. ZH-SYS-PS 400, Kapex KS 120, CT Cyclone Dust Collection Pre-Separator CT VA 20, DF 500 Q Set, Domino 1,060pc Tenon Assortment, UG-KA-SET Portable Imperial Stand & Extensions,

Offline atogrf1

  • Posts: 154
  • FESTOOL
Re: Federal Inspired Huntboard
« Reply #11 on: April 28, 2020, 08:09 AM »
Thanks Thompmd.  No problem at all.  The more Festool plates the better.  However, I do stand out like a sore thumb when I go to Handworks with it.  LOL.

Offline Don T

  • Posts: 1940
  • Phoenix, Az
Re: Federal Inspired Huntboard
« Reply #12 on: April 28, 2020, 11:51 AM »
That is absolutely beautiful.
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS, C18, HL850, Vac Sys set

Offline atogrf1

  • Posts: 154
  • FESTOOL
Re: Federal Inspired Huntboard
« Reply #13 on: April 28, 2020, 12:01 PM »
Thanks Don!!!!

Offline mike_aa

  • Posts: 1161
Re: Federal Inspired Huntboard
« Reply #14 on: April 28, 2020, 06:35 PM »
That is drop dead gorgeous!  Sorry I missed seeing it earlier. Congratulations!

Mike A.
« Last Edit: April 28, 2020, 06:44 PM by mike_aa »

Offline atogrf1

  • Posts: 154
  • FESTOOL
Re: Federal Inspired Huntboard
« Reply #15 on: April 28, 2020, 06:43 PM »
Thanks Mike!!!!!