Author Topic: phone charging table updated, pics added  (Read 1083 times)

0 Members and 1 Guest are viewing this topic.

Offline Crazyraceguy

  • Posts: 1892
phone charging table updated, pics added
« on: May 10, 2022, 08:28 PM »
I don't really "get it" with this one. It's huge a full 4' x 8' and 36" high. It is essentially a torsion box with its own legs. Access door underneath for the power and it runs down one leg. It will have the brush style grommet through the top. This is one of those projects that looks simple, it's minimal and clean, but that is deceptive. There is a ton of work involved in "looking" simple. I don't know why you would need a charging table so big?
It's almost done at this point and will be early tomorrow. All that's really left are the locks on the door and laminating the actual top surface, but I'm nearly 16 hours deep in it now.
Yes, the Gecko was there to open the door when some dummy closed it. I could have pushed it through the groove, but the Gecko just seemed better. The guy who watched me use it for that said "of course you do"
You can't see them all, but a boatload of Bessey clamps was involved in the glue-up of the legs.
« Last Edit: May 11, 2022, 06:43 PM by Crazyraceguy »
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1010F
OF1400
MFK700 (2)
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75
Shaper Origin/Workstation
MFT clamps set
Installers set
Centrotech organizer set

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Crazyraceguy

  • Posts: 1892
Re: phone charging table
« Reply #1 on: May 11, 2022, 06:43 PM »
Updated to add some finished pics.
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1010F
OF1400
MFK700 (2)
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75
Shaper Origin/Workstation
MFT clamps set
Installers set
Centrotech organizer set

Offline jarbroen

  • Posts: 400
Re: phone charging table updated, pics added
« Reply #2 on: May 24, 2022, 01:40 PM »
On the surface it does look deceptively simple, like you mentioned.  If only the customers appreciated/saw all the work and detail that goes into the underpinnings.

It looks like a table that you would see at an Apple store.  You mentioned 'why have such a big charging table'... because Apple, that's why!

Offline Crazyraceguy

  • Posts: 1892
Re: phone charging table updated, pics added
« Reply #3 on: May 24, 2022, 06:09 PM »
On the surface it does look deceptively simple, like you mentioned.  If only the customers appreciated/saw all the work and detail that goes into the underpinnings.

It looks like a table that you would see at an Apple store.  You mentioned 'why have such a big charging table'... because Apple, that's why!

Except it's going in a church....lol
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1010F
OF1400
MFK700 (2)
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75
Shaper Origin/Workstation
MFT clamps set
Installers set
Centrotech organizer set

Offline neilc

  • Posts: 3094
Re: phone charging table updated, pics added
« Reply #4 on: May 25, 2022, 11:11 AM »
"Except it's going in a church....lol"

What do you think an Apple Store is to the faithful?!

Nice work!

Offline Crazyraceguy

  • Posts: 1892
Re: phone charging table updated, pics added
« Reply #5 on: May 25, 2022, 06:29 PM »
"Except it's going in a church....lol"

What do you think an Apple Store is to the faithful?!

Nice work!

true
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1010F
OF1400
MFK700 (2)
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75
Shaper Origin/Workstation
MFT clamps set
Installers set
Centrotech organizer set