Author Topic: Corner Vanity for Small 3/4 Bath  (Read 649 times)

0 Members and 1 Guest are viewing this topic.

Offline Mike Goetzke

  • Posts: 760
Corner Vanity for Small 3/4 Bath
« on: March 12, 2020, 01:45 PM »
Started work in on this almost two weeks ago. I used my track saw with TSO GRS squares and TPG parallel guide system to break down all of the ply. Maybe it’s just me but it was getting tiring changing to various rail lengths and TPG arms, but, it was the quickest I broke down this much ply down at one sitting. I was beat up at the end.

What a joy it was to be able to cut a miter on the track that I could line up the anti-chip to. With my old track saw system that used a standard circular saw the pivot point of the saw bevel made to cut line go where it wanted to and it wasn’t at the anti-chip.

I then used some of my other toys to assemble the cabinet boxes. I used a combination of wood screws, Kreg screws, and Dominos.

There is going to be a taller cabinet next to the left but need to see how everything fits before I glue it up.




Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline ultane

  • Posts: 90
Corner Vanity for Small 3/4 Bath
« Reply #1 on: March 12, 2020, 04:07 PM »
Great job!
I might be wrong… Just ask my X...