Author Topic: Cherry and salvaged steel table lamp  (Read 689 times)

0 Members and 1 Guest are viewing this topic.

Offline rvieceli

  • Posts: 1200
Cherry and salvaged steel table lamp
« on: June 10, 2020, 06:24 PM »
Another project photographed. Since all of my shows until September cancelled and I’m concerned about the rest of the year [sad] have to get some stuff up on the website.

Cherry, welded salvaged steel base, finished with clear Osmo Polyx. Lots of nice texture on the cut lines on the base.













« Last Edit: June 10, 2020, 06:28 PM by rvieceli »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline ear3

  • Posts: 4032
Re: Cherry and salvaged steel table lamp
« Reply #1 on: June 10, 2020, 10:34 PM »
There's some beautiful elegant simplicity in this piece.
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • AGC 18-115 • CT 26 w/BT module • CT Sys w/Long-Life Bag • MFT/3

Offline rvieceli

  • Posts: 1200
Re: Cherry and salvaged steel table lamp
« Reply #2 on: June 11, 2020, 06:57 AM »
Thank you Edward

Offline RJNeal

  • Posts: 516
Re: Cherry and salvaged steel table lamp
« Reply #3 on: June 11, 2020, 09:00 AM »
That’s really beautiful Ron. Now when I go looking for wood I’ll need to pick a short split! 
Thanks for sharing.
Rj
Have you walked your saw today?

Offline Cheese

  • Posts: 7368
Re: Cherry and salvaged steel table lamp
« Reply #4 on: June 11, 2020, 09:13 AM »
That's nice Ron...I don't know which side I like better.  [big grin]

The rough looking front with the tie straps and the rough torch cut edge on the base...OR...

The absolutely pristine rear with the smooth edge on the base but interrupted by the welded mounting bracket.

I wonder what flush set flat head cap screws would look like instead?

Are there some bumpers or felt pads on the bottom of the steel base?

Offline rvieceli

  • Posts: 1200
Re: Cherry and salvaged steel table lamp
« Reply #5 on: June 11, 2020, 09:56 AM »
Thanks folks.

Yes there are stick on felt circles on the bottoms of all the bases. Keeps the steel from scratching up stuff.

I just ordered and got some stainless flat socket head screws so I may try those on something.

I use those on some small night light like things. These are fastened from the bottom. So I need the counter sink for clearance.



Ron

Offline Richard/RMW

  • Posts: 2016
Re: Cherry and salvaged steel table lamp
« Reply #6 on: June 12, 2020, 09:29 AM »
Ron, can you pop a link to your website so we can admire your other pieces?

Love the design & execution.

RMW
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline rvieceli

  • Posts: 1200
Re: Cherry and salvaged steel table lamp
« Reply #7 on: June 12, 2020, 10:02 AM »
Thank you Richard. I’m redoing the website to allow for shopping online but it is still up in its current state

www.studiovieceli.com

www.instagram.com/studiovieceli

Ron
« Last Edit: June 12, 2020, 10:07 AM by rvieceli »

Offline ear3

  • Posts: 4032
Re: Cherry and salvaged steel table lamp
« Reply #8 on: June 12, 2020, 08:22 PM »
Not nearly as nice as yoyurs Ron, but I did a lamp project with spalted maple a few years ago that I posted about.

Kapex KS 120 w/UG Cart and Extensions • CXS Set • T18+3 w/Centrotec Installer's Set • PDC 18/4 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • AGC 18-115 • CT 26 w/BT module • CT Sys w/Long-Life Bag • MFT/3

Offline Cheese

  • Posts: 7368
Re: Cherry and salvaged steel table lamp
« Reply #9 on: June 12, 2020, 08:55 PM »
Not nearly as nice as yoyurs Ron, but I did a lamp project with spalted maple a few years ago.

I absolutely love spalted maple. It doesn’t make any sense but that’s where love ❤️ intervenes.

Offline Sparktrician

  • Posts: 3960
Re: Cherry and salvaged steel table lamp
« Reply #10 on: June 13, 2020, 08:22 AM »
Thank you Richard. I’m redoing the website to allow for shopping online but it is still up in its current state

www.studiovieceli.com

www.instagram.com/studiovieceli

Ron

Ron, I really like your vision.   [smile]
- Willy -

 "Remember, a chip on the shoulder is a sure sign of wood higher up." - Brigham Young

Offline rvieceli

  • Posts: 1200
Re: Cherry and salvaged steel table lamp
« Reply #11 on: June 13, 2020, 08:36 AM »
Thanks Willy