Author Topic: Check my parts list for Blum hardware?  (Read 592 times)

0 Members and 1 Guest are viewing this topic.

Offline DynaGlide

  • Posts: 641
Check my parts list for Blum hardware?
« on: January 23, 2020, 10:38 AM »
Getting ready to order some stuff to do a mock up cabinet before I start ordering the nicer materials to do several more boxes/drawers/doors etc. First time in this territory so want to get a check from someone who does this on the regular that I won't be placing another order.

Plan is as follows: 24" base cabs, frameless, overlay doors and drawers line bored with LR32 system to accept 21" Tandem plus slides and 110 degree hinges. There will be some upper cabs, same style with doors.

Here's what I've come up with in terms of parts:

Instagram @matts.garage

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline tjbnwi

  • Posts: 6172
  • Cedar Tucky Indiana
Re: Check my parts list for Blum hardware?
« Reply #1 on: January 23, 2020, 10:55 AM »
The slide number is 563H5330B.

If you have any shared panels you’ll need the 71B3650 hinges and the Blum sex bolts to mount them.

The rest of the numbers are correct. 

Tom

Offline DynaGlide

  • Posts: 641
Re: Check my parts list for Blum hardware?
« Reply #2 on: January 23, 2020, 11:24 AM »
The slide number is 563H5330B.

If you have any shared panels you’ll need the 71B3650 hinges and the Blum sex bolts to mount them.

The rest of the numbers are correct. 

Tom

Thanks Tom. Helpful as usual.
Instagram @matts.garage

Offline Dan Rush

  • Posts: 590
  • Trim carpenter
Re: Check my parts list for Blum hardware?
« Reply #3 on: January 23, 2020, 01:52 PM »
One more thought: the 563h slides are for drawer boxes with 5/8" sides. 563f are for 3/4" sides.  I was recently jammed up by a supplier when they they sent a mix of the slides for a retro fit.

Offline todd_fuller

  • Posts: 20
Re: Check my parts list for Blum hardware?
« Reply #4 on: January 29, 2020, 04:12 PM »
A comment about the drawer locking devices, those highly adjustable ones are pretty wide so if you have narrow drawers, be aware of that.

Also, do you have the Blum drilling template? I think it's like $20 but for all the little holes, it can be a decent time saver.