Author Topic: Cedar Strip Kayak Project  (Read 837 times)

0 Members and 1 Guest are viewing this topic.

Offline WarrenT

  • Posts: 24
Cedar Strip Kayak Project
« on: April 18, 2021, 09:58 AM »
I just finished building a kayak from western red cedar strips.  A lot of my Festools came in handy including my 1010 and 1400 routers for working on the pad eyes and the retractable skeg.   Although I did a lot of sanding with my ETS 150, the tool I used most was the RO 90 Rotex.

Along with the interface pad, it was great for sanding the curved surfaces and really worked well for the buffing and polishing after applying the finish.

My Kapex and my TS 55 were of little use, there weren’t many straight or square cuts going on  :)    There were no Dominos either !

I wrote a long winded description in my blog for a boat building forum I frequent.  Don’t feel compelled to read it all, looking at the pictures is free !

https://53gmc.blog/2021/04/17/cedar-strip-kayak-project/
« Last Edit: April 18, 2021, 10:06 AM by WarrenT »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline rmhinden

  • Posts: 459
Re: Cedar Strip Kayak Project
« Reply #1 on: April 18, 2021, 12:16 PM »
Wow, that is very nice.  Great work!

Bob

Offline Sparktrician

  • Posts: 4162
Re: Cedar Strip Kayak Project
« Reply #2 on: April 18, 2021, 12:40 PM »
@WarrenT, that kayak is really sweet!  Congratulations on a great project.  Have you put it in the water yet?   [big grin]
- Willy -

  "Show us a man who never makes a mistake and we will show a man who never makes anything. 
  The capacity for occasional blundering is inseparable from the capacity to bring things to pass."

 - Herman Lincoln Wayland (1830-1898)

Offline tjskinny

  • Posts: 109
Re: Cedar Strip Kayak Project
« Reply #3 on: April 18, 2021, 01:59 PM »
Wow indeed !   Fabulous work and a great read!  Thanks for documenting the build, I passed your blog along to a friend that is in the process of building a canoe.

Offline SDWW2019

  • Posts: 66
Re: Cedar Strip Kayak Project
« Reply #4 on: April 18, 2021, 05:44 PM »
Congratulations!! Absolutely beautiful and amazing work. Very inspiring and thanks for sharing your journey with us. Cheers!

Offline Cheese

  • Posts: 8605
Re: Cedar Strip Kayak Project
« Reply #5 on: April 18, 2021, 05:46 PM »
Simply a stunning job on the kayak... [thumbs up] ...especially for the first go-around.  [big grin]

I also really enjoyed The Great Race coverage, especially the part involving the 1955 Buick station wagon and the aqua Mustang.  [jawdrop]

Offline Stan Tillinghast

  • Posts: 197
Re: Cedar Strip Kayak Project
« Reply #6 on: April 18, 2021, 10:33 PM »
I have admired cedar strip kayaks, particularly Nick Schade's designs, for years. Bravo Zulu!
Let's have a full report after her maiden cruise.
Für uns...ist das Beste gerade gut genug!

Offline David

  • Posts: 511
  • Author/speaker/advisor to entrepreneurial experts.
    • A few pieces that I’ve built
Re: Cedar Strip Kayak Project
« Reply #7 on: April 19, 2021, 01:16 PM »
Your work is inspiring. Not only is it beautiful, you're a great storyteller. I posted a link to your stuff on Twitter.
Fifth book (less interesting than woodworking) at http://www.expertise.is