Author Topic: Another Grandchild, Another Crib  (Read 595 times)

0 Members and 1 Guest are viewing this topic.

Offline BarneyD

  • Posts: 81
Another Grandchild, Another Crib
« on: August 11, 2019, 02:08 PM »
Hi All,
We have another grandchild scheduled for arrival next Friday. Don't know which variety as the parents want to be surprised. So of course I received the "commission" to build the crib which I just finished. The design is loosely based off a photo that my DIL sent for inspiration. The wood is cherry with garnet shellac as finish. Thankfully I have a DF500 - there are 110 tenons in this thing. Now I have to crate it up and ship it to Philly.
Cheers,
Barney

Barney

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline rvieceli

  • Posts: 1043
Re: Another Grandchild, Another Crib
« Reply #1 on: August 11, 2019, 02:25 PM »
very nice Barney

Offline WarrenT

  • Posts: 3
Re: Another Grandchild, Another Crib
« Reply #2 on: August 11, 2019, 02:25 PM »
Wow, That is a great job by a proud Grandfather !

I just bought a Domino two days ago, now I know what it can do.    :)

The design, the wood selection, and the finish combine nicely to make a beautiful project.

Offline Dogberryjr

  • Posts: 134
Re: Another Grandchild, Another Crib
« Reply #3 on: August 11, 2019, 03:07 PM »
Very nice.

Offline BarneyD

  • Posts: 81
Re: Another Grandchild, Another Crib
« Reply #4 on: August 11, 2019, 04:21 PM »
Thanks to all for the kind words.
Barney

Offline JimD

  • Posts: 375
Re: Another Grandchild, Another Crib
« Reply #5 on: September 15, 2019, 08:53 PM »
Looks Great!  I am getting close to done on my first crib, third grandchild is due in November.  I went with the plans from Wood magazine which helped but I don't think they are great plans. 

It looks like you may have used cross bolts, I call them barrel bolts, to hold it together.  If so, did you have any difficulty?  The plans I used call for drilling the nut holes before assembly and the bolt holes after deeper than needed in both cases.  I had a variety of issues with my 8 bolts.  Biggest issue was nuts that did not want to come back out if pushed too far.  I think it was loose pieces from the bolt hole in the nut hole hanging them up.  I used hard maple which machined pretty well. 

Offline BarneyD

  • Posts: 81
Re: Another Grandchild, Another Crib
« Reply #6 on: Yesterday at 12:22 PM »
Thanks, @JimD

That was also my third crib. I've used the Wood Mag plans and also the Rockler plans. This one is my design. I did not use the barrel bolts. I used the RTA bolts and steel threaded insert nuts (from McFeelys). I also used Dominoes (without glue).

Have you found a source for the mattress support yet? For my first two cribs I purchased the supports from Products America, but they've since gone out of business. I've hunted high and low for an alternate source but have come up empty. We have an old unused crib here and I was going to use the mattress support from it, but it's an inch too long. I'm about to cut it down so it will fit the new crib. But if you've found a new source, I'd love to buy a new one.
Thanks,
Barney
Barney