Author Topic: What - non Festool - tool / workshop related gizmo/stuff did you buy today?  (Read 136454 times)

0 Members and 1 Guest are viewing this topic.

Offline Cheese

  • Posts: 8551
Last week also brought the Wessel nozzle that was all the rage for a page or two there. Thank you FOG!

Are you running the Wessel on 36 mm hose?  What are your thoughts?

The band file is really handy...besides abrasive belts, ScotchBrite belts are also available.

Offline Imemiter

  • Posts: 198
So far I've only used it with the 27mm(?) that came with the Midi and CT Sys. The nozzle works incredibly well on carpet and hardwood. A big improvement over the well-used Fein it's replacing. One of my clients is a crazy cat lady who I know has some model of Roomba. Just to experiment I vacuumed an area rug outside my work zone. The difference was so noticable I had to vacuum the whole room. The rug didn't look bad before, but post-Wessel it looked much, much better.

I'm using it with the Festool wand/handle and it's nice being able to adjust brush speed with the air flow valve. I was due for a new nozz' and your review came at just the right time. Thanks!

     
CSX T18+3 TID18 HKC55 OSC18 OS400 OF1010 LR32 DF700 RAS115 DTS400 ETC125 CTSys CTMidi CT-VA

Offline FestitaMakool

  • Posts: 986
Oh Baby!
(Attachment Link)
This thing is ridiculously handy. I'll forget that I have it and then remember, "Oh Yeah!" A serious problem solver. 


Nahh you did did you.. I want one too! One untethered one, and I did notice this ones release, seemed a bit pricey, but as you say it’s a problem solver. Please let us know how you like it in a while  [big grin]
“The Stig” Yes, it is true, at least some part of it..
“If you have an old Land Rover and a fit wife, you’re most likely always busy”

Offline Cheese

  • Posts: 8551
The nozzle works incredibly well on carpet and hardwood. A big improvement over the well-used Fein it's replacing. One of my clients is a crazy cat lady who I know has some model of Roomba. Just to experiment I vacuumed an area rug outside my work zone. The difference was so noticable I had to vacuum the whole room. The rug didn't look bad before, but post-Wessel it looked much, much better.

Thanks for the input...that's also been my general impression. Pretty impressed with the results so far, I've been using mine with a 36 mm hose. And I'm way impressed with using it on black rugs that contain white dog & cat hair.

Offline mrB

  • Posts: 885
Just received one of these from the US. It’s OAINA it seems.



I’m very excited to stop hauling my compressor around as much. I typically used an 18g Brad nailer and initially thought the 35mm pin length too small to replace that, but on greater consideration decided that while less good for 10% off my tasks the pin nailer will actually be better for 90% of my uses with its smaller finish holes. Carrying a SYS1 around for my nailing  needs is gonna be sooo much nicer than that compressor.

Sadly I can’t use it yet as the tool got here faster from the US than the pin nails coming from the UK :)
there's nothing like the right tool for the job

Offline CeeJay

  • Posts: 345
I wonder if they meant 3 days to process and ship out your order.

8-9 days is impressive given the pandemic time we're living in. Many Amazon orders take 4 to 6 days to get from the States to Canada after they're placed.
Came a day early. 8 days - that’s pretty amazing.




Sent from my iPhone using Tapatalk

Offline CeeJay

  • Posts: 345
Perfect timing for the jewellery box next project.




Sent from my iPhone using Tapatalk

Offline Cheese

  • Posts: 8551
Re: What non-Festool tool did you buy today...3M Cubitron II discs
« Reply #757 on: May 07, 2021, 11:07 PM »
3M Cubitron 125 mm sanding discs in a sample pack...pretty sweet. Note the "Not For Retail Sale" notice on the front of the package, now that makes sense because these things were only 30 cents each...that's what I'd call a loss leader.  [smile]



So Mother Mining offers a package of 3 each 80-120-150-180-220 film discs and a package of 5 each 240-320-400 film discs. If purchased in these 15 disc trial packages the 125 mm discs are 30 cents each, if purchased in normal 50 each quantities they are 90 cents each.

This allows you to figure out what papers you really need and will use. I also like that 3M is using a film based substrate as compared to a paper based substrate. The film based substrate goes back to 3M's experience with automotive finishing. It's supposed to provide a smoother, more uniform surface and is compatible with water.




These are the 3M part numbers for the discs...No Hole (NH) discs on the left and the Clean Sanding Discs (spiral hole pattern) on the right.




So here's the selection from 80 to 400.


Offline squall_line

  • Posts: 397
Thank you for the detailed post on that, @Cheese !  Very much appreciated!

Offline notenoughcash

  • Posts: 120
a makita rail bag, for festool rails

(i know i can hear the upror from here)

reason beeing.

its less likey to get nabbed on site if it doesnt say festool on it.

also you pay 2x the amount for having festool writen on it.
turns out that woodworking is 1% making things you'll use, 4% making bespoke high end firewood, 15% cleaning, and 80% looking for the bl**dy thing you just put down
PSC 420 EB, TSC 55 REB, CTL MIDI I

Offline ChuckM

  • Posts: 2690
18" blending curve and 6" hook rule from Lee Valley. Too bad that the longer hook rules are no longer available.


Offline notenoughcash

  • Posts: 120
not bought, but i got a goodie pack from medite in the mail today.

SUPRISE [smile] [smile] [smile] [smile]

had a water bottle, a pad and pen and a competition entry slip in it.

now what can i make for that competition to get that £1000 prize pack?!??!?!?!?!?!?
turns out that woodworking is 1% making things you'll use, 4% making bespoke high end firewood, 15% cleaning, and 80% looking for the bl**dy thing you just put down
PSC 420 EB, TSC 55 REB, CTL MIDI I

Offline DynaGlide

  • Posts: 1054


I have a very nice wife. Very early anniversary gift. In exchange she will be getting a full on custom closet with the works after I finish the office.
Instagram @matts.garage

Offline Stan Tillinghast

  • Posts: 194
My Dash-Board workbench and accessories finally arrived! Love the design and quality of materials and workmanship, can’t wait to start using it!
Für uns...ist das Beste gerade gut genug!

Offline Cheese

  • Posts: 8551


I have a very nice wife. Very early anniversary gift. In exchange she will be getting a full on custom closet with the works after I finish the office.

Hoy boy Matt...there were probably a lot of genuflections and "but honey" conversations going on for that acquisition. [smile]

But did you ever consider, maybe she just really wants her own FatBoy?

And don't leave out the custom closet...that's also part of the pact with or without the FatBoy and the Lamello.




Offline DynaGlide

  • Posts: 1054


I have a very nice wife. Very early anniversary gift. In exchange she will be getting a full on custom closet with the works after I finish the office.

Hoy boy Matt...there were probably a lot of genuflections and "but honey" conversations going on for that acquisition. [smile]

But did you ever consider, maybe she just really wants her own FatBoy?

And don't leave out the custom closet...that's also part of the pact with or without the FatBoy and the Lamello.

@Cheese

I have a very nice Fat Bob (not Boy)



It's very custom although it might not look it. I went the Johnny Cash route. Engine, transmission, gearing, suspension you name it I did it and myself too. She has no interest in motorcycles. But surprisingly there was very little " but honey" thrown around for the Zeta. I said I needed it to finish the office and do her closet and that was that.

I made a sys port with the clamex and boy is it easy to use.

Instagram @matts.garage

Offline Packard

  • Posts: 387
I got a second Kreg Multi-Mark.  I had been wanting to get another one for a while.

(Attachment Link)

I discovered that the left "holster" slot on my Veritas apron is the perfect location for my first Kreg Multi-Mark.  I'm really liking the apron!

(Attachment Link)

I got the Milescraft version from Amazon.com ($9.00) which is almost the same but has two level vials.

https://www.amazon.com/gp/product/B071RPGZM9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I was concerned about the accuracy of the square, so I gave it to  our QC manager at work to put on the Nikon comparator.  He reported that the 90 degree was dead on, and 45 degree was off by less than  1/2 degree.  I think that is acceptable accuracy for woodworking.

All other functions are pretty much the same as the Kreg unit.  I did not test the Kreg unit so I don't know the accuracy of that one.


Offline ghjaxman

  • Posts: 132
I ended up buying a Rabbit Air 2 to clean the air in my shop.  I wish I had bought it earlier, it works great and it is quiet. It really makes a difference.

Offline Cheese

  • Posts: 8551

@Cheese

I have a very nice Fat Bob (not Boy)



It's very custom although it might not look it. I went the Johnny Cash route. Engine, transmission, gearing, suspension you name it I did it and myself too. She has no interest in motorcycles. But surprisingly there was very little " but honey" thrown around for the Zeta. I said I needed it to finish the office and do her closet and that was that.

I made a sys port with the clamex and boy is it easy to use.

Nice looking bike Matt... [cool] very  [cool]

The first thing that jumps out at me are the Michelins, they look similar to the ones my neighbor recently put on his 996 and 1100 Monster. Those tires look good on your bike.  [smile]

Offline Packard

  • Posts: 387
A friend of mine lived in a rough neighborhood and he had a Harley.  He would wash his bike in front of a neighbor's home who he disliked. 

Often, the evening after washing the bike, the neighbor's garage would be broken into.  No Harley there though.   [big grin]

Offline hdv

  • Posts: 324
Oh man, look what arrived today!  [cool]  I feel like I am in an art gallery.   [drooling] Even the packaging is beautiful (fittingly they have used wood shavings as filler, not plastic).  [thumbs up]



I am sure I will enjoy using these (as soon as I find the time to spend in the shop, which has been too long).
« Last Edit: June 01, 2021, 01:35 PM by hdv »

Offline GoingMyWay

  • Posts: 1223
I picked up the Astra Coated Whiteside UDC9112 Ultimate Flush Trim Combination Router Bit after seeing Sedge use it in the "Build A Chair From One Board!" video.

Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline Cypren

  • Posts: 136
I picked up the Astra Coated Whiteside UDC9112 Ultimate Flush Trim Combination Router Bit after seeing Sedge use it in the "Build A Chair From One Board!" video.
I love this thing. A friend calls it the "BFPB": "big f'ing pattern bit". One of the few things I use that demands the OF2200.

Offline madjalapeno

  • Posts: 36
Just bought one of these after admiring them on too many Korean and Japanese YouTube videos.

https://suzukitool.com/tools/japanese-woodworking-tools/layout/matsui-seimitsu/matsui-kegaki-scribing-gauges.html

332487-0
TS55C ◉ CT15 ◉ Kapex KS 120 REB ◉ Domino DF500 ◉ PS 420 EBQ ◉ RO 125 FEQ ◉ DTS 400 REQ-Plus