Author Topic: What - non Festool - tool / workshop related gizmo/stuff did you buy today?  (Read 112642 times)

0 Members and 2 Guests are viewing this topic.

Offline FestitaMakool

  • Posts: 637
Cheese, that’s well.. almost too nice [big grin]
Clever!
“The Stig” Yes, it is true, at least some part of it..
“If you have an old Land Rover and a fit wife, you’re most likely always busy”

Offline FestitaMakool

  • Posts: 637
Finally, I’ve waited a long time to get my hands on this kit. It is the 435ME-300 with both imperial and mm. Great ruler! The kit came in the plastic box which was a pleasant surprise as the photos and description didn’t say.
Bought from Axminster at a very reasonably price. Too bad they don’t have the double square and separate rulers in chrome. I’ll probably order them from Lee Valley very soon. Annoyingly Starrett is hard to find here.

@Cheese : Very pleased with this, and I see a slight addiction for these personal tools to come. That is that they are for me, and only me [big grin].

“The Stig” Yes, it is true, at least some part of it..
“If you have an old Land Rover and a fit wife, you’re most likely always busy”

Offline six-point socket II

  • Posts: 1477
  • formerly @the_black_tie_diyer
What a piece of kit. Awesome!

Kind regards,
Oliver
Kind regards,
Oliver

"... . Say yes to stuff, and it will take you interesting places." - Anne Richards, CEO Fidelity International

Offline six-point socket II

  • Posts: 1477
  • formerly @the_black_tie_diyer
I got me a 25mm Hultafors "EDC Chisel" -> https://www.hultafors.com/products/chisels/H0296-chisel-edc/80402













Kind regards,
Oliver
Kind regards,
Oliver

"... . Say yes to stuff, and it will take you interesting places." - Anne Richards, CEO Fidelity International

Offline Cheese

  • Posts: 7770
Finally, I’ve waited a long time to get my hands on this kit. It is the 435ME-300 with both imperial and mm. Great ruler! The kit came in the plastic box which was a pleasant surprise as the photos and description didn’t say.
Bought from Axminster at a very reasonably price. Too bad they don’t have the double square and separate rulers in chrome. I’ll probably order them from Lee Valley very soon. Annoyingly Starrett is hard to find here.

@Cheese : Very pleased with this, and I see a slight addiction for these personal tools to come. That is that they are for me, and only me [big grin].


Well, I see that Starrett's certainly stepped up their packaging quite a bit.  [smile]  That item was previously sold in a thin cardboard box.

The chrome finish that Starrett uses is absolutely the best. It's so easy to read and it holds up well to moisture. A number of years ago I purchased a 18" fully stainless blade to use with the square. While the stainless is impervious to rust, it's terrible to try to read. That's probably the reason they no longer sell stainless blades.

You can purchase items directly from Starrett. I just don't know about the shipping aspect.

https://www.starrett.com/metrology/product-detail/13A

Offline FestitaMakool

  • Posts: 637
Finally, I’ve waited a long time to get my hands on this kit. It is the 435ME-300 with both imperial and mm. Great ruler! The kit came in the plastic box which was a pleasant surprise as the photos and description didn’t say.
Bought from Axminster at a very reasonably price. Too bad they don’t have the double square and separate rulers in chrome. I’ll probably order them from Lee Valley very soon. Annoyingly Starrett is hard to find here.

@Cheese : Very pleased with this, and I see a slight addiction for these personal tools to come. That is that they are for me, and only me [big grin].


Well, I see that Starrett's certainly stepped up their packaging quite a bit.  [smile]  That item was previously sold in a thin cardboard box.

The chrome finish that Starrett uses is absolutely the best. It's so easy to read and it holds up well to moisture. A number of years ago I purchased a 18" fully stainless blade to use with the square. While the stainless is impervious to rust, it's terrible to try to read. That's probably the reason they no longer sell stainless blades.

You can purchase items directly from Starrett. I just don't know about the shipping aspect.

https://www.starrett.com/metrology/product-detail/13A

Thanks [smile] - I just looked into the UK site, I’ll try an order there, securing at least one chrome blade, and both the 100 and 150mm double squares. I might even add a more pocket friendly 150mm combination square.

Nice carpenters chisel Oliver! Have similar from Bacho, but yours looks better
I carry a couple of these too: https://morakniv.se/produkt/stam/

(Have the Hultafors version, but really hard to sharpen)
Morakniv has nice easy sharpened steel.
“The Stig” Yes, it is true, at least some part of it..
“If you have an old Land Rover and a fit wife, you’re most likely always busy”

Offline hdv

  • Posts: 197
Guide rail spacers from Dictum



See this link


Offline jobsworth

  • Posts: 6355
  • Festool Baby.....
Bought a small wall mountable dust collector. Shop Fox along with clamps and 4" hose. Usually use my CTs for all dust collection , but they cant keep up when I use my 12" planer and jointer. I made a adapter to use my CT 22. It worked fine for light cuts but once I tried to take a normalcy the hose got clogged also the CT got clogged.
 So I thought since im only going to use it for the Jointer/Planer a small portable one will do nicely. Build a cabinet planer on top, DC on bottom should store nicely out of the way.

Offline jcrowe1950

  • Festool Dealer Affiliate
  • *
  • Posts: 126
    • Woodcraft Chattanooga, TN

Ever since taking a couple of classes from Gregory Paolini, I have lusted after a Calavera Toolworks Tobacco work apron. Yesterday I got the package from Michael and as I told him, it is in a single word....Awesome




It fit like a glove immediately and felt broken in.....Woohoo
Festool Specialist at Woodcraft, Chattanooga, TN

Offline DrDrey

  • Posts: 9
jcrowe1950: A beautiful apron!
· MW1000 Mobile Workshop · Jigsaw Carvex PS 420 Plus EBQ Emerald Set ·

Offline DrDrey

  • Posts: 9
Strictly speaking, I did not buy this "today", but very recently.

NAREX Paring Chisel. Width: 1/2" (13mm). This is a chisel with a long blade, for hard-to-reach locations. Blade Length: 245mm (9-1/2"). Handle Length: 134mm (5-3/4"). Total Length: 390mm (15-1/4"). Excellent workmanship.

· MW1000 Mobile Workshop · Jigsaw Carvex PS 420 Plus EBQ Emerald Set ·

Offline Mike Goetzke

  • Posts: 574
Sorry - this is a gloat too. I have had a Makita cordless for a few years now and really like it. For some reason I've been looking for a good price for another saw for backup so I'm not without a saw if something happens to my old one. Plus thought it would be nice to have a cross cut and rip cut dedicated saws.

I get an email maybe week+ ago about a FLASH sale. It shows the Makita kit for $499 with a 39" rail so that was probably the bonus. I click on the link and it says add item to cart to see price - $179! Before I could spit out my coffee in disbelief I ordered one. Second surprise I received it!


Offline FestitaMakool

  • Posts: 637
That’s a whole lot of saw for toy money [eek]
“The Stig” Yes, it is true, at least some part of it..
“If you have an old Land Rover and a fit wife, you’re most likely always busy”

Offline Vtshopdog

  • Posts: 61
10' vacuum hose with 3 pair flexible adapter ends.  This is not a sexy item, but all of the sudden my Midi and multiple other shop vacs will interface with my Dust Deputy, all my Festools and an assortment of other brand sanders, routers and my hand held power planer.  Even plugs on to end of my M-18 mini vac.  Not top end quality but nice enough and only $25 on Amazon.

The three pair of adapters can be mix and match configured to fit whatever tool and vac device combination is convenient.  Will solve all sorts of compatibility issues and will make it really easy to include Dust Deputy in vacuum chain.  Fits the end of my Midi hose and can function as an extension if I want to sand on a ladder or whatever.


Offline tomp

  • Posts: 111
Just ordered one.  Here's a link Hose with Adapters $24.99 includes shipping.

Offline FestitaMakool

  • Posts: 637

Ever since taking a couple of classes from Gregory Paolini, I have lusted after a Calavera Toolworks Tobacco work apron. Yesterday I got the package from Michael and as I told him, it is in a single word....Awesome


(Attachment Link)

It fit like a glove immediately and felt broken in.....Woohoo

Really nice apron!
I’d like some more dividers on the lower pockets, and holder/pocket for hammer, folding ruler or other longer items.
I’ve ordered Katz-Moses’ apron, looking forward receiving them, shipped august 15th.. still waiting [blink]
“The Stig” Yes, it is true, at least some part of it..
“If you have an old Land Rover and a fit wife, you’re most likely always busy”

Offline Cheese

  • Posts: 7770
What non Festool tool did you buy today?...Woodpeckers Posi-Lock T-SQ
« Reply #646 on: September 30, 2020, 10:12 PM »
This is a pretty slick item, it was ordered on Jan 5th & I received it today. I'd still consider it well worth the wait.  [big grin] [big grin]

The movement is very smooth and there are detents that allow it to be easily set from +20º to 90º to -20º in 5º increments. The detents also allow it to be set at 22.5º & 67.5º.




Here's a photo of it next to the 2616 square.




And here is the business end of the T-SQ, notice both the squareness of it compared to the 2616 and also the length markings on both items. Parallax error in the photo makes it look like there is a small difference in the two rules but when seen by the naked eye they are both exactly the same.



« Last Edit: October 01, 2020, 09:15 AM by Cheese »

Offline jobsworth

  • Posts: 6355
  • Festool Baby.....
Bought a Wiha 1/4 socket set came with a set of reg sockets and deep well ratchet extension both metric and imperial.  I need a full set of 1/4 sockets, got them on sale. Listed at $249 got for $109

Offline hdv

  • Posts: 197
I seriously looked at that Posi-Lock myself when it was on offer. But it was only available in imperial, not in metric. Too bad.

Offline CeeJay

  • Posts: 190
I got tired of tweaking my back twisting over to switch the DC on where I’ve got it wedged in down low between the bench and mitre station:



So bought an iVac remote control unit.

Spent a few hours figuring out the wiring to bypass the Jet mechanical NVR switch on the DC to plumb it into the magnetic NVR switch on the iVac controller but all good and it works great:





Having done that I now realise I didn’t really need the remote control - just relocating the NVR switch up onto the wall would have done the trick.

Nevertheless it’s pretty handy carrying the remote around to switch the DC on and off as I use the different machines, plus being able to program the off delay to 15 seconds to allow the lines to clear is quite cool.


Sent from my iPhone using Tapatalk

Offline FestitaMakool

  • Posts: 637
An opportunity to order a few items along with a couple of Starrett squares from LeeValley resulted in a pair of dry battery operated Orb Lights, and a rechargeable one.

Put to work today attached to a Manfrotto clamp which again was clamped to my windows handle. Swinging the window out it served as a pivoted point to get lighting from. It’s a very handy and useful additional light that can be attached to any 1/4” screw, as the “camera” standard for tripods and such.

Lots of light in 50% lighting mode had my work area lit where I’m removing paint “gluing” wether boards to the window frame I’m about to exchange for new windows.


Hanging from a Manfrotto clamp with ball head:
“The Stig” Yes, it is true, at least some part of it..
“If you have an old Land Rover and a fit wife, you’re most likely always busy”