Author Topic: What Festool Kit Would You Like Phil To Bring?  (Read 11950 times)

0 Members and 1 Guest are viewing this topic.

Offline jobsworth

  • Posts: 6724
  • Festool Baby.....
What Festool Kit Would You Like Phil To Bring?
« on: March 22, 2015, 07:55 AM »
I created this thread seperately so it wouldn't get lost in the post on my BBQ Thread.

Phil wanted to know if there was any particular bit of kit you guys would like him to bring to the BBQ

Old kit or new kit doesn't matter.

I'd like to get my hands on the C18 and the PDC and maybe the new CSX and TSX as I'm looking for another drill.

Anyone else please let Phil know on this thread.

Jobby
« Last Edit: May 15, 2015, 05:29 PM by jobsworth »

Offline Phil Beckley

  • Posts: 1518
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #1 on: March 22, 2015, 08:11 AM »
Ok
PDC
C18
CXS
TXS
CTL SYS
HKC 55 + Rails x 3  [cool]
Festool wall clock for 'prize draw'   [cool]


Updated 18.4.15

Will update as and when
rg
Phil
« Last Edit: April 18, 2015, 05:38 PM by Phil Beckley »

Offline jobsworth

  • Posts: 6724
  • Festool Baby.....
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #2 on: March 22, 2015, 09:17 AM »
Your going to have to rent a van this time hehehehehehe
« Last Edit: March 22, 2015, 11:15 AM by jobsworth »

Offline joiner1970

  • Posts: 3222
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #3 on: March 22, 2015, 10:11 AM »
Sounds boring but I'd like to have a real good look at an mft3 to see what all the fuss is about

Offline jonny round boy

  • Posts: 3227
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #4 on: March 22, 2015, 11:01 AM »
I'll be bringing my PDC and VAC-SYS, so that's two off the list Phil.
Festoolian since February 2006

TS55R EBQ saw - CTL26 - CTL Mini - OF1400EBQ router - KS120 Kapex SCMS - ETS150/3 sander - RO90 sander - DF500 Domino - PDC18/4 drill - PSC420 jigsaw - OFK500 trimmer

Wish list (in no particular order!): Anything not listed above....

Offline jobsworth

  • Posts: 6724
  • Festool Baby.....
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #5 on: March 22, 2015, 11:16 AM »
I'd like to check out the Vac system.....
« Last Edit: March 22, 2015, 01:57 PM by jobsworth »

Offline charley1968

  • Posts: 491
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #6 on: March 22, 2015, 12:16 PM »
Felder table saw?
Just for today..

Offline Davej

  • Posts: 630
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #7 on: March 22, 2015, 01:47 PM »
HKC55 and anything that's still a secret .!
I dont mind growing old but i refuse to grow up

Offline jobsworth

  • Posts: 6724
  • Festool Baby.....
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #8 on: March 22, 2015, 01:56 PM »
Sounds boring but I'd like to have a real good look at an mft3 to see what all the fuss is about

Ill have one set up. It's "used" but it will be there. I'll be using a old style Kapex fence just show how sweet it is. But other then that feel free to check it out.

Offline Phil Beckley

  • Posts: 1518
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #9 on: March 22, 2015, 07:26 PM »
I'll be bringing my PDC and VAC-SYS, so that's two off the list Phil.

Have you got the second clamping unit? If not i will bring it......we can swing Ron of it!! [eek]

Offline jonny round boy

  • Posts: 3227
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #10 on: March 22, 2015, 07:36 PM »
I'll be bringing my PDC and VAC-SYS, so that's two off the list Phil.

Have you got the second clamping unit? If not i will bring it......we can swing Ron of it!! [eek]

Sorry, my bad. When I said VAC-SYS, I meant CTL-SYS!!!  [embarassed]
Festoolian since February 2006

TS55R EBQ saw - CTL26 - CTL Mini - OF1400EBQ router - KS120 Kapex SCMS - ETS150/3 sander - RO90 sander - DF500 Domino - PDC18/4 drill - PSC420 jigsaw - OFK500 trimmer

Wish list (in no particular order!): Anything not listed above....

Offline Phil Beckley

  • Posts: 1518
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #11 on: March 22, 2015, 07:40 PM »
I'll be bringing my PDC and VAC-SYS, so that's two off the list Phil.

Have you got the second clamping unit? If not i will bring it......we can swing Ron of it!! [eek]

Sorry, my bad. When I said VAC-SYS, I meant CTL-SYS!!!  [embarassed]

Will bring it anyway [smile]

Offline jobsworth

  • Posts: 6724
  • Festool Baby.....
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #12 on: March 23, 2015, 02:36 PM »
I'll be bringing my PDC and VAC-SYS, so that's two off the list Phil.

Have you got the second clamping unit? If not i will bring it......we can swing Ron of it!! [eek]

Hey you do know how I like to show off

Offline jobsworth

  • Posts: 6724
  • Festool Baby.....
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #13 on: March 23, 2015, 02:37 PM »
I'd like to get a look at that vacuum set up to.

I've never seen it up close and Personal.

Offline Phil Beckley

  • Posts: 1518
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #14 on: March 23, 2015, 05:33 PM »
May be able to get hold of a Beam planer - the biggie version  [eek]

Offline Alan m

  • Posts: 3323
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #15 on: March 23, 2015, 06:56 PM »
i think all the NAINA stuff. then just leave it in the van just to rub it in a bit more
"A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
- Sir Winston Churchill (1874-1965)

Offline Phil Beckley

  • Posts: 1518
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #16 on: April 18, 2015, 05:40 PM »
Ok
PDC
C18
CXS
TXS
CTL SYS
HKC 55 + Rails x 3  [cool]
Festool wall clock for 'prize draw'   [cool]


Updated 18.4.15

Will update as and when
rg
Phil

Let me know of anything you would like to see for the meet up......date is approaching fast [eek]
rg
Phil

Offline jonny round boy

  • Posts: 3227
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #17 on: April 19, 2015, 03:58 AM »
Prototypes/pre-production models of all the not-yet-announced 18v gear?  [blink]

Got to hope there's quite a few of those... [tongue]
Festoolian since February 2006

TS55R EBQ saw - CTL26 - CTL Mini - OF1400EBQ router - KS120 Kapex SCMS - ETS150/3 sander - RO90 sander - DF500 Domino - PDC18/4 drill - PSC420 jigsaw - OFK500 trimmer

Wish list (in no particular order!): Anything not listed above....

Offline joiner1970

  • Posts: 3222
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #18 on: April 19, 2015, 07:13 AM »
The new hkc55 :)

Offline jonny round boy

  • Posts: 3227
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #19 on: April 19, 2015, 09:49 AM »
The new hkc55 :)

It's already on the list!
Festoolian since February 2006

TS55R EBQ saw - CTL26 - CTL Mini - OF1400EBQ router - KS120 Kapex SCMS - ETS150/3 sander - RO90 sander - DF500 Domino - PDC18/4 drill - PSC420 jigsaw - OFK500 trimmer

Wish list (in no particular order!): Anything not listed above....

Offline joiner1970

  • Posts: 3222
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #20 on: April 19, 2015, 09:51 AM »

Offline Phil Beckley

  • Posts: 1518
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #21 on: April 19, 2015, 10:43 AM »
Prototypes/pre-production models of all the not-yet-announced 18v gear?  [blink]

Got to hope there's quite a few of those... [tongue]

Hmmm, remember the large black Mercedes with darkened windows that you saw opposite Ron's place last year...... [blink] [scared]

rg
Phil


Offline jobsworth

  • Posts: 6724
  • Festool Baby.....
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #22 on: April 28, 2015, 03:04 AM »
Hey Phil,
I just picked up the C18 so no need to bring it.

Being delivered today, I've been Holding off finishing a project to use it.

Now about that cooltainer.......l..

Offline crazydave789

  • Posts: 64
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #23 on: April 30, 2015, 08:01 PM »
a sys0.5 laptop case would be rather cool  [big grin]

Offline jonny round boy

  • Posts: 3227
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #24 on: May 05, 2015, 08:02 AM »
I think Phil should bring the 2015 roadshow truck...
Festoolian since February 2006

TS55R EBQ saw - CTL26 - CTL Mini - OF1400EBQ router - KS120 Kapex SCMS - ETS150/3 sander - RO90 sander - DF500 Domino - PDC18/4 drill - PSC420 jigsaw - OFK500 trimmer

Wish list (in no particular order!): Anything not listed above....

Offline joiner1970

  • Posts: 3222
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #25 on: May 05, 2015, 08:04 AM »
I think Phil should bring the 2015 roadshow truck...
No need to take it back either we can look after it lol

Offline Phil Beckley

  • Posts: 1518
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #26 on: May 06, 2015, 04:22 PM »
I think Phil should bring the 2015 roadshow truck...

    Hmmm, i can bring the smaller version  [wink] but not sure if Rons neighbours would appreciate the full size version on their driveway [eek] [eek] [jawdrop]
   The guy who drives the truck is a wizard when reversing. I watched him reverse out of a dealers premises near to our H.Q - two right hand 90 degree turns a 90 degree left on to the main road - all done in one smooth operation  [cool]
rg
Phil

Offline SittingElf

  • Posts: 1374
  • 66 Systainers and rising! YIKES!
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #27 on: May 06, 2015, 04:50 PM »
I'd like to get a look at that vacuum set up to.

I've never seen it up close and Personal.

Just send me a round trip ticket from Florida and return....and I'LL bring the full Vac-Sys for ya!!!  Even the secondary clamping unit and all the heads!! [tongue]

Did you want to send the ticket by FedEx, or Royal Mail??? [big grin]

Cheers,
Frank
Woodworking is 3% talent and 97% paying attention to the FOG! 

hammerfelderowners.com

Offline Phil Beckley

  • Posts: 1518
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #28 on: May 06, 2015, 04:53 PM »
I'd like to get a look at that vacuum set up to.

I've never seen it up close and Personal.

Just send me a round trip ticket from Florida and return....and I'LL bring the full Vac-Sys for ya!!!  Even the secondary clamping unit and all the heads!! [tongue]

Did you want to send the ticket by FedEx, or Royal Mail??? [big grin]

Cheers,
Frank

How about all those who have confirmed to Ron turn up in Florida for a tour of the collection. My training room is packed but i reckon your running close behind [unsure]
Phil

Offline SittingElf

  • Posts: 1374
  • 66 Systainers and rising! YIKES!
Re: What Fesstool Kit Would You Like Phil To Bring?
« Reply #29 on: May 06, 2015, 05:04 PM »
Heh heh.... [smile]

Frank
Woodworking is 3% talent and 97% paying attention to the FOG! 

hammerfelderowners.com