Author Topic: Quartz countertop seam  (Read 671 times)

0 Members and 1 Guest are viewing this topic.

Offline rocky100370

  • Posts: 32
Quartz countertop seam
« on: April 04, 2021, 06:57 AM »
Hi All
Installed my quartz countertop and the seam has a lip on one side. Less than a 1/16". What is the best way to smooth this out? Can I separate the pieces and start over or grind the high side down? Also what items are needed? Will a RO125 do the trick?

Thanks in advance
« Last Edit: April 04, 2021, 06:57 PM by rocky100370 »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Crazyraceguy

  • Posts: 497
Re: Quartz countertop seam
« Reply #1 on: April 11, 2021, 09:44 AM »
Getting it back apart will probably be quite a challenge. Grinding and repolishing will take some special stones and skills. Maybe consult a local shop that specializes in this, but it might be costly.
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1400
MFK700 (2)
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75

Offline imdking

  • Posts: 26
  • Tropical woodworking hobbyist
Re: Quartz countertop seam
« Reply #2 on: April 25, 2021, 07:32 AM »
Transfer that measurement to the top of the cabinet, and skim off the top of the cabinet wall.
TS55 REBQ, FS 1400/2, FS 800, Festool carrying bag for rails, FS-AW Cable Deflector, Kapex KS 120 REB, CTM Midi, Domino DF 500, FS-HZ 160 ratchet lever clamps x2.