Author Topic: Put my TS75 to work  (Read 934 times)

0 Members and 1 Guest are viewing this topic.

Offline Tswood

  • Posts: 17
Put my TS75 to work
« on: September 25, 2020, 03:32 AM »


I recently completed my corner desk project, using Baltic birch plywood. The TS75 did an awesome job!

I wrote a long blog post with the details.

https://woodcraftly.com/baltic-birch-plywood-corner-desk


Sent from my iPhone using Tapatalk

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline CeeJay

  • Posts: 209
Re: Put my TS75 to work
« Reply #1 on: September 25, 2020, 05:59 AM »
That looks fantastic! Great way to use offcuts.


Sent from my iPhone using Tapatalk

Offline Rick Herrick

  • Posts: 348
Re: Put my TS75 to work
« Reply #2 on: September 25, 2020, 09:38 AM »
This is beyond impressive.  I haven't read the blog but the amount of work just blows me away.  Even the joint of each long section, where the 'V' is matched all around.  Absolutely cool.  Excellent work..!

Offline Thompmd

  • Posts: 169
Re: Put my TS75 to work
« Reply #3 on: September 25, 2020, 10:02 AM »
Amazing!!

How many hours?
Sawstop Industrial Saw, TS75,2 1400 rails, CT36, Rotex RO 150 FEQ, CT-VA-20, Carvex PS 420 EBQ, Carvex acc. ZH-SYS-PS 400, Kapex KS 120, CT Cyclone Dust Collection Pre-Separator CT VA 20, DF 500 Q Set, Domino 1,060pc Tenon Assortment, UG-KA-SET Portable Imperial Stand & Extensions,OF1400 EQ-F-Plus, MFT/3, MFT-SP, FS-HZ 160

Offline six-point socket II

  • Posts: 1484
  • formerly @the_black_tie_diyer
Re: Put my TS75 to work
« Reply #4 on: September 25, 2020, 10:35 AM »
Looks nice! :)

Kind regards,
Oliver
Kind regards,
Oliver

"... . Say yes to stuff, and it will take you interesting places." - Anne Richards, CEO Fidelity International

Offline Tswood

  • Posts: 17
Re: Put my TS75 to work
« Reply #5 on: September 25, 2020, 10:43 AM »
Amazing!!

How many hours?
It stretched over 5 weeks due to day job and and other home remodeling projects. Was kinda relieved when that was done.


Sent from my iPhone using Tapatalk

Offline jobsworth

  • Posts: 6458
  • Festool Baby.....
Re: Put my TS75 to work
« Reply #6 on: September 25, 2020, 01:02 PM »
Nice job,I really like the look of it

Offline Michael Kellough

  • Posts: 4910
Re: Put my TS75 to work
« Reply #7 on: September 25, 2020, 01:35 PM »
It does look good!

What is going on in this pic?


Offline Tswood

  • Posts: 17
Put my TS75 to work
« Reply #8 on: September 25, 2020, 03:07 PM »
It does look good!

What is going on in this pic?


Almost a big mess up lol. Used TIII for longer working time and thought “ya well let’s just put the glue on all strips” ... well that were the most intense 15min in the hole project to spread the glue quick, flip each strip and align 45 degree before putting on the tons of clamps. Well, lesson learned. For the second sheet I did max 6 strips at a time. I also aligned the second batch 45def, draw long lines across so it was easier to align them during glue up.



Sent from my iPhone using Tapatalk
« Last Edit: September 25, 2020, 03:29 PM by Tswood »

Offline Ajax

  • Posts: 196
Re: Put my TS75 to work
« Reply #9 on: September 26, 2020, 11:28 AM »
Very cool
Kapex KS120, MFT/3, TS55 REQ, LS130, RTS400, RO90 DX FEQ, D90 Assortment, RO150 REQ, ETS 150/3, PRO5, D150 Assortment, DF 500, Domino 4/5/8/10 Assortment, DF700 XL, Domino 12/14 Assortment,  CT Midi, MFT/3, Kapex MFT, 2 x SysRoll

Offline Mike Goetzke

  • Posts: 584
Re: Put my TS75 to work
« Reply #10 on: October 16, 2020, 01:37 PM »

Almost a big mess up lol. Used TIII for longer working time and thought “ya well let’s just put the glue on all strips” ... well that were the most intense 15min in the hole project to spread the glue quick, flip each strip and align 45 degree before putting on the tons of clamps. Well, lesson learned. For the second sheet I did max 6 strips at a time. I also aligned the second batch 45def, draw long lines across so it was easier to align them during glue up.


Very nice effect with the BB layers. What did you use to put down the glue? I built  a wood entrance door and had to race to get all the joints glued up. I used one of those small foam rollers that are packaged in the paint try and it made gluing quick and even.

Mike

Offline mkasdin

  • Posts: 360
Re: Put my TS75 to work
« Reply #11 on: October 16, 2020, 08:05 PM »
Nice job. I read the blog. How long did it take to collect the scraps or is this from a full sheet plus leftovers? What was the build time... a domino would have expedited the pre-glue up