« previous next »
Pages: [1]   Go Down

Author Topic: A little window trim...  (Read 1218 times)

0 Members and 1 Guest are viewing this topic.

Offline tjbnwi

  • Posts: 6075
  • Cedar Tucky Indiana
A little window trim...
« on: August 25, 2019, 09:18 PM »
To start with I hate drywall window returns....One before the new windows and trim.

One room, 8 windows of the 39(?) I did. Fabricated and sprayed the trim in the shop.

These were the most fun due to getting them mated up in the corner---jack miters are your friend.

Parallax is your enemy...

Tom
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline neilc

  • Posts: 2740
Re: A little window trim...
« Reply #1 on: August 25, 2019, 10:04 PM »
Nice improvement on the before for sure!

Are you in Colorado full-time now Tom?

I'm sure there is plenty of work there for your talents.

Thanks for sharing.
Logged

Offline tjbnwi

  • Posts: 6075
  • Cedar Tucky Indiana
Re: A little window trim...
« Reply #2 on: August 25, 2019, 10:11 PM »
Quote from: neilc on August 25, 2019, 10:04 PM
Nice improvement on the before for sure!

Are you in Colorado full-time now Tom?

I'm sure there is plenty of work there for your talents.

Thanks for sharing.

Those wndows are in Highlands Ranch CO.

Looks like I'm here for the long term. The wife has decieded were selling the house and moving.

We leave behind 2 grandchildren back home,  "my girls" will be less than an hour away.

Our son and granchildern back home, "my girls" here in CO.  Picture of the girls was taken on the River Walk in Chicago in early July.
 
Tom
« Last Edit: August 25, 2019, 10:13 PM by tjbnwi »
Logged

Offline DynaGlide

  • Posts: 490
Re: A little window trim...
« Reply #3 on: August 26, 2019, 07:18 AM »
Those look incredible. Are you a one man band now? My brother in law is in Denver, we just visited in June. There's a lot of talent in that area between Marc Spagnuolo, Mike Farrington, and now you.
Logged
Instagram @matts.garage

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 12038
  • MacGyver - My boy 2010 - 2019 RIP
Re: A little window trim...
« Reply #4 on: August 26, 2019, 08:17 AM »
@tjbnwi , I have had the pleasure and honor of meeting you and also reading your posts here and elsewhere for years.  Your career history, your dedication to whatever you are doing, and your dedication to your family are mind-boggling to me in the most positive way.

I am glad to read that you and your wife will soon not be separated by too many miles.  You are one of a kind.

Peter
Logged

Offline tjbnwi

  • Posts: 6075
  • Cedar Tucky Indiana
Re: A little window trim...
« Reply #5 on: August 26, 2019, 08:21 AM »
Quote from: DynaGlide on August 26, 2019, 07:18 AM
Those look incredible. Are you a one man band now? My brother in law is in Denver, we just visited in June. There's a lot of talent in that area between Marc Spagnuolo, Mike Farrington, and now you.

For the first time in my careers I'm not a one man band. I have one great employee, he is the son of a Ed Michnick, who is a member here.

Tom
Logged

Offline tjbnwi

  • Posts: 6075
  • Cedar Tucky Indiana
Re: A little window trim...
« Reply #6 on: August 26, 2019, 08:22 AM »
Quote from: Peter Halle on August 26, 2019, 08:17 AM
@tjbnwi , I have had the pleasure and honor of meeting you and also reading your posts here and elsewhere for years.  Your career history, your dedication to whatever you are doing, and your dedication to your family are mind-boggling to me in the most positive way.

I am glad to read that you and your wife will soon not be separated by too many miles.  You are one of a kind.

Peter

Thank you Peter.

Tom
Logged

Offline jobsworth

  • Posts: 5838
  • Festool Baby.....
Re: A little window trim...
« Reply #7 on: August 26, 2019, 09:08 AM »
Great job Tom,

I love those tight miters and the way the moulding makes the windows pop.

 About time you decided to move there full time.

Now ya get the joy of fixing your house up for sale moving and fixing the new house up to move into.

Still got to get out to visit you in Colorado.

One of these days huh?
Logged

Offline Michael Kellough

  • Posts: 4218
Re: A little window trim...
« Reply #8 on: August 26, 2019, 01:05 PM »
Fantastic work as always. I like that the trim not only brightened the room but improved the season as well.  [wink]
Logged

Offline PeterJJames13

  • Posts: 160
Re: A little window trim...
« Reply #9 on: August 26, 2019, 04:02 PM »
Quote from: Michael Kellough on August 26, 2019, 01:05 PM
Fantastic work as always. I like that the trim not only brightened the room but improved the season as well.  [wink]

Lol - amazing what some white paint can do to get some leaves on the trees!
Logged

Offline tjbnwi

  • Posts: 6075
  • Cedar Tucky Indiana
Re: A little window trim...
« Reply #10 on: August 26, 2019, 06:34 PM »
Quote from: PeterJJames13 on August 26, 2019, 04:02 PM
Quote from: Michael Kellough on August 26, 2019, 01:05 PM
Fantastic work as always. I like that the trim not only brightened the room but improved the season as well.  [wink]

Lol - amazing what some white paint can do to get some leaves on the trees!

Never said I was fast......

Tom
Logged

Offline Jiggy Joiner

  • Posts: 785
Re: A little window trim...
« Reply #11 on: August 27, 2019, 06:32 AM »
Great improvement, coincidentally we are currently doing something very similar for an American lady, who has a beautiful house over here close to Richmond Park.

We are installing new Georgian style windows and casement doors, along with liners, grounds and architraves, and also covering the existing plaster reveals of the existing windows, with liners and architrave.
It adds so much character  [thumbs up]
Logged

Offline broseiden

  • Posts: 59
Re: A little window trim...
« Reply #12 on: August 27, 2019, 11:58 PM »
@tjbnwi

I know this is odd but I've appreciated your posts here on the FOG and on other forums, literally for years.

I'm a journeyman carpenter and when I see advice or suggestions from you, I take them seriously, as you're a wealth of knowledge. Despite not having any personal interaction.

Been meaning for a while to start a thread to say that, but I thought that this was a good opportunity. Tlso anyway, thanks Tom!

You should write Fine Homebuilding :o
Logged

Offline tjbnwi

  • Posts: 6075
  • Cedar Tucky Indiana
Re: A little window trim...
« Reply #13 on: August 28, 2019, 12:07 AM »
@broseiden,

Thank you, I appreciate the compliments.

Ulitmatley I'm just a guy with a tape measure and a saw.......

Tom
Logged

Offline TSO Products

  • Retailer
  • *
  • Posts: 849
    • TSO Products
Re: A little window trim...
« Reply #14 on: August 28, 2019, 10:06 AM »
Quote from: tjbnwi on August 28, 2019, 12:07 AM
@broseiden,

Thank you, I appreciate the compliments.

Ulitmatley I'm just a guy with a tape measure and a saw.......

Tom

Tom, - Ultimately Arnie Palmer was just a guy with a golfball and a club . . .

Seriously, while your woodworking methods and advice are amply documented in countless threads on the FOG, I would add something not so apparent: you do an exceptional job of planning your work, material yield, cost, the works. Your craftsmanship is matched by the value you deliver to your customers.

Amid all of that you continue to make time to provide help and advice to anyone who asks - including TSO. Our Parallel Guide would not be the robust product it has become without your generous help in BETA testing. A great inspiration for us to "pay it forward"

thank you Tom for being the quality person you are!

Hans and Eric
Logged
TSOproducts.com

Home of the GRS-16 and GRS-16 PE  plus TPG Parallel Guide -  the MTR-18 Triangle - TDS-10 Dog Stop and GRC-12 Guide Rail Connector; Work Holding solutions plus AXMINSTER UJK in the USA

Offline tjbnwi

  • Posts: 6075
  • Cedar Tucky Indiana
Re: A little window trim...
« Reply #15 on: August 28, 2019, 04:34 PM »
Quote from: TSO Products on August 28, 2019, 10:06 AM
Quote from: tjbnwi on August 28, 2019, 12:07 AM
@broseiden,

Thank you, I appreciate the compliments.

Ulitmatley I'm just a guy with a tape measure and a saw.......

Tom

Tom, - Ultimately Arnie Palmer was just a guy with a golfball and a club . . .

Seriously, while your woodworking methods and advice are amply documented in countless threads on the FOG, I would add something not so apparent: you do an exceptional job of planning your work, material yield, cost, the works. Your craftsmanship is matched by the value you deliver to your customers.

Amid all of that you continue to make time to provide help and advice to anyone who asks - including TSO. Our Parallel Guide would not be the robust product it has become without your generous help in BETA testing. A great inspiration for us to "pay it forward"

thank you Tom for being the quality person you are!

Hans and Eric

Isn’t he the guy who combined iced tea with lemonade? [big grin]

Thanks Hans. I can’t say enough good things about your contributions. 

Tom
Logged
Pages: [1]   Go Up
« previous next »