Author Topic: favorite utility (Stanley) knife?  (Read 6096 times)

0 Members and 1 Guest are viewing this topic.

Offline Packard

  • Posts: 526
Re: favorite utility (Stanley) knife?
« Reply #30 on: February 22, 2021, 08:23 AM »
Milwaukee Fastback for me.  It's replaced my pocketknife, in fact.

Is that the same as "Olfa"?  Olfa is my favorite.  They make several types, the ones with a thumbwheel lock are the most durable.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Imemiter

  • Posts: 203
Re: favorite utility (Stanley) knife?
« Reply #31 on: February 22, 2021, 03:13 PM »
I love this thread. Several interesting knives I've never heard of.

For the last six or seven years my favorite has been this safety orange Techni-Edge Swift Switch. It has my preferred bent handle and a more solid blade purchase than most of the non-retracting knives I've had. The black spring-loaded block pivots off the back allowing the two halves to separate for tool-less swift blade switches. There's space for ten extra blades, and the blade retainer is held in place by a magnet so it doesn't fall out during swift switching. The magnet also snicks the new blade in place until the two halves can be swiftly reassembled.

These were on display at the board store and came with the same plastic sheath Occidental now includes for sharps with their toolbelts. initially, the sheath caught my eye more than the knife. But after a week of use, and intuiting that like so many good ideas it was doomed to be discontinued, I went back and got another for a spare. Pictured is the first one. 

In 2018 Stanley bought Techni-Edge and from the look of things, drowned them in the bathtub. They were too swift to live.   

CSX T18+3 TID18 HKC55 OSC18 OS400 OF1010 LR32 DF700 RAS115 DTS400 ETC125 CTSys CTMidi CT-VA

Offline harry_

  • Posts: 1341
Re: favorite utility (Stanley) knife?
« Reply #32 on: May 08, 2021, 07:31 PM »
Disclaimer: This post is for educational and entertainment purposes only. Any resemblance to real persons, living or dead is purely coincidental. Void where prohibited. Some assembly required. Batteries not included. Contents may settle during shipment. Use only as directed. No other warranty expressed or implied. This is not an offer to sell securities. May be too intense for some viewers. No user-serviceable parts inside. Subject to change without notice. One size fits all (very poorly).

Offline Michael Kellough

  • Posts: 5263
Re: favorite utility (Stanley) knife?
« Reply #33 on: May 08, 2021, 09:44 PM »
It’s nice to be able to change blades quickly but sometimes you want the most rigid blade possible and that kind of knife has to be screwed tight. My favorite of that kind is a really old DEFIANCE cast iron knife. It is heavier than most but the handle halves are perforated to lighten it up and the holes also improve the grip. That blade does not wiggle a single nanometer.

Offline Packard

  • Posts: 526
Re: favorite utility (Stanley) knife?
« Reply #34 on: June 04, 2021, 02:38 PM »
I have this light-duty breakaway knife from Olfa.   I find that the thumbwheel lock is the most reliable.

For heavier cuts I use this Olfa, again with the thumbwheel lock:

In my pocket is this Gerber lock back knife.  The blade is held in place with a set screw.  Slower to replace, but no wiggle or wobble. Very compact with a money clip or belt clip included.  All stainless steel.

For cutting larger boards I use a Fletcher 3000 mat/glass/plastic cutter.  Wall mounted and not portable, heavy and expensive (about $3,000.00 currently); it was left over from my picture framing business.  It cuts up to 40" tall, in mat boards,  glass or plexiglass with the use of a turret head holding various cutters.  I am not recommending its purchase, but if you have one it is great.  Limited to 90 degree cuts.