Author Topic: Hultafors EDC Chisel's  (Read 9434 times)

0 Members and 1 Guest are viewing this topic.

Offline Throwback7r

  • Posts: 294
Hultafors EDC Chisel's
« on: July 17, 2014, 08:52 AM »
So I found these and decided to give them a try, I don't have any other chisel's so thought why not buy the entire set, and a few knifes. They are made really nice and I like the holster, very good design I like that you can see the size really easy and the holes for water to escape are large and plenty full.

 


Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline bijeshj

  • Posts: 194
Re: Hultafors EDC Chisel's
« Reply #1 on: July 17, 2014, 09:25 AM »
they look really cool. where did you buy them?

Offline Throwback7r

  • Posts: 294
Re: Hultafors EDC Chisel's
« Reply #2 on: July 17, 2014, 09:29 AM »
http://www.repconnw.com


You have to call them. They were really nice on the phone and super fast shipping from portland to chicago area in 2 days, I was expecting to wait a week.

Offline PeterJeffrey

  • Posts: 1
Re: Hultafors EDC Chisel's
« Reply #3 on: September 05, 2014, 05:15 AM »
Personally I don't like the looks of the chisels, but I do however like the fact that they come with holsters, just like Bahco's do! Does anyone know where they are made and what steel?

Offline SittingElf

  • Posts: 1374
  • 66 Systainers and rising! YIKES!
Re: Hultafors EDC Chisel's
« Reply #4 on: September 05, 2014, 09:03 AM »
Personally I don't like the looks of the chisels, but I do however like the fact that they come with holsters, just like Bahco's do! Does anyone know where they are made and what steel?
From their website:

"The Chisels EDC is made of perfectly sharpened Japanese steel and a heavy-duty handle, made of glass-fiber reinforced PP-plastic, that can stand even the most hard-hitting treatment. The blade tangs are provided with barbs to prevent the blade from being forced inside the handle when hitting, making the chisel feel and perform as one solid part. In addition, to make them all highly accessible, we have also designed a smart new holster that can be easily attached to a belt, pocket, or jeans-button. "All in all, every function needed – right at hand," says Håkan Carlsson.

Still think the actual manufacture is probably China.

Cheers,

Frank
« Last Edit: September 05, 2014, 09:05 AM by SittingElf »
Woodworking is 3% talent and 97% paying attention to the FOG! 

hammerfelderowners.com

Offline Throwback7r

  • Posts: 294
Re: Hultafors EDC Chisel's
« Reply #5 on: September 05, 2014, 09:22 AM »
There is nothing on the chisel's I do like them though.

Offline PreferrablyWood

  • Posts: 900
Re: Hultafors EDC Chisel's
« Reply #6 on: October 26, 2014, 03:58 PM »
I think they would be interesting, if the performance is great, and the price is right.. I'll check them out..
RO 150, 850 HL E Planer rustic head standard head angle fence, MFS 400x2, MFS extensions MFS VB 700 x 1 MFS VB 1000 x 2 . CMS GE, sliding fence, VB and 2x VL extension tables, OF 2200, Accessory Set ZS OF 2200 M,36mm 5m antistatik hose, CMS OF+ CMS TS 75 insert modules. SYS-MFT Fixing-Set,  3.5m sleeved hose, Syslite duo, Sys 4 sort 3 x3, Sys Roll, Sys 1 Box x2 , classic Sys 3-Sort 4, classic Sys 3 Sort 6 x2, Sys Cart x3 Systainer 4 x2  as toolbox with selfmade inserts Systainer 5 as toolbox with insert.
Festool 18V HKC 55 Li 5.2 EB Plus FSK 420,FSK 250, Extra blade for the HKC 55 W32.TI 15, CXS 2.6 Ah version, RO 90 DX, PDC 18/4 plus DC UNI FF depth stop chuck,AD 3/8 square socket holder FF chuck, Centrotec Bits; -->Bit holder and bit selection BHS 65 CE TL 24x, ,Bradpoint DB WOOD CE SET ,Zobo (Forstner) D 15-35 CE-Zobo SET ,Masonary/stone bits DB STONE CE Set,Extender BV 150 CE, Countersink QLS D2-8 CE Hook turner HD D18, end centrotec<--.  TS 75 EBQ, PSC 420, OF 1010, RS 300 EQ, CTL Midi, MFT 3, Parf dogs x2pair +Bench dogs x2pair, FS 1080, FS 1900 .  will get Domino DF 700 XL,  CMS insert BS 120 Belt sander.

Offline DAZ40

  • Posts: 44
Re: Hultafors EDC Chisel's
« Reply #7 on: October 26, 2014, 04:51 PM »
So I found these and decided to give them a try, I don't have any other chisel's so thought why not buy the entire set, and a few knifes. They are made really nice and I like the holster, very good design I like that you can see the size really easy and the holes for water to escape are large and plenty full.

 


Does the holster have a belt clip on it so it will fit on a toolbelt

Offline Throwback7r

  • Posts: 294
Re: Hultafors EDC Chisel's
« Reply #8 on: October 26, 2014, 08:03 PM »
Yes it does just like the Hultafors knife's

Offline sae

  • Posts: 842
Re: Hultafors EDC Chisel's
« Reply #9 on: January 08, 2015, 09:12 AM »
Any long term feedback on these?

I have a Hultafors axe, and have been very pleased.

Offline Throwback7r

  • Posts: 294
Re: Hultafors EDC Chisel's
« Reply #10 on: January 08, 2015, 09:59 AM »
I have been very pleased with the set of them. The most used out of the set is the Chisel knife. I really don't know how I even did somethings with out it. I have since bought snickers pants and they have a spot for the holsters so that helps. If you have any questions just PM me.

Offline richy3333

  • Posts: 201
Re: Hultafors EDC Chisel's
« Reply #11 on: January 08, 2015, 03:32 PM »
They are designed to fit on Snickers trousers or Snickers tool vests. I use the electricians knife and go through a couple a year. They are cheap and I consider them disposable.

Never tried the chisels.

Re: Hultafors EDC Chisel's
« Reply #12 on: May 21, 2015, 02:45 PM »
They are carbon steel and they take to sharpening well. I think the price is fair.

The steel is not quite the same quality as they were before, as with older Bahco steel chisels, or the "E.A Berg", which I have plenty of and which are among the very best on the market regardless of price.
Festool:  CS 50EB precisio set, Domino DF500, DF XL 700, OFK500 edge router, OF1010 router EHL65 planer, CTL Mini/Midi Vac, CTL 26 vac MFT800+1080 tables
DSC-AG Grinder,  RAS 115
Rotex 150, ETS EC 150/5 RTS400
Drills: T18, BHC18, CXS.
SysLite KAL II, SYS Rock.
Sys- and Sortainers galore.

Line up has been reduced with the introduction of Mafell/Metabo tools. Red Green and Blue do mix well in the shop.