Author Topic: Best Woodworking YouTube Channels... (Read 16871 times)

Jim Kirkpatrick · « **Reply #30 on:** August 14, 2019, 07:24 AM »

PeterJJames13 · « **Reply #31 on:** August 14, 2019, 08:14 AM »

I do too. He really explains things very well. I've learned a lot from him.

Ster1154 · « **Reply #32 on:** August 14, 2019, 08:37 AM »

I've watched Mike Farrington's videos several times over. He's a phenomenal craftsman and great teacher.

Bugsysiegals · « **Reply #33 on:** August 14, 2019, 10:55 AM »

I started watching Steve Johnson - Down to Earth Woodworks when I was looking to make an outfeed table for my SawStop. I like that he takes the time to explain things, is well spoken, humble, and he has a lot of various series I've found value in.

Interesting fact, after contacting him with some questions, I discovered he lived only a mile away from me!! He's given helpful suggestions in building my basement wood shop and is the one who introduced me to Festool.

JMcFly · « **Reply #34 on:** October 01, 2019, 12:00 PM »

Shaun Boyd

Four Eyes Furniture

these two are awesome, very mid century modern inspired but go through their steps and processes.

jobsworth · « **Reply #35 on:** October 02, 2019, 01:23 PM »

Just found these guys :

Peter Millard , very good lots of jigs etc for the MFT

and this guy hes pretty good as well.

Gosforth handyman , He's pretty good with track saws and other things.

Mario Turcot · « **Reply #36 on:** November 04, 2019, 12:17 PM »

Here my list. You made me realized that I watch too many videos

New Britt Workshop
Guy's Woodshop
Jay Bates
The Wood Whisperer
Fix This Build That
Built it Scrap Bin
Crafted Workshop
Paul Jenkins
The Woodpecker (English/French)
Rob Cosman
Olivier Verdier (Mostly French)
David Stanton
Shaun Boyd
Down To Earth Woodworking
Anthony Scolaro
Dan Pattison
Wortheffort
Mike Farrington
Dustin Penner
Greg Virgoe
CNCNuts (CNC Videos)
Make Something
Shop Built
Stuff I Made
Bent's Woodworking
Fisher's Shop
TreeBangHam
Paul Sellers
Making It (For pure fun)
David Barron
Slow And Expensive (Newly founded)
I Like To Make Stuff (Not only woodworking)
Philipe Do Carmo
My Garage Woodshop

ChuckM · « **Reply #37 on:** November 04, 2019, 04:17 PM »

Quote from: Mario Turcot on November 04, 2019, 12:17 PM

Here my list. You made me realized that I watch too many videos

Wow...Your list suggests that I'm still living in the 90s. NYW and Tage Frid (DVD) are still my favorites.

Mario Turcot · « **Reply #38 on:** November 04, 2019, 04:56 PM »

Quote from: ChuckM on November 04, 2019, 04:17 PM

Quote from: Mario Turcot on November 04, 2019, 12:17 PM
Here my list. You made me realized that I watch too many videos
Wow...Your list suggests that I'm still living in the 90s. NYW and Tage Frid (DVD) are still my favorites.

I like to learn how people attack the same problems with a different approach/solution and/or tools. From those channels I've learned a bunch of tips and tricks.

jobsworth · « **Reply #39 on:** November 28, 2019, 11:46 AM »

Been under the weather so I spent some time cruising you tube.

I found jennieanddavis ( jennie and davis)

I really liked them. They are not on the how to build stuff but more along running a wood working business lots of info on pricing , build quality, batching, getting finding and holding on customers etc.

they just moved to Tx its a entirely new area to them as they are from ND. So it will be interesting seeing how they are starting from scratch.

Oh a young cute couple to I might add.

Janis · « **Reply #40 on:** December 23, 2019, 06:10 PM »

This small youtube channel is kind of interesting: New Craft

ForumMFG · « **Reply #41 on:** December 23, 2019, 09:09 PM »

If you are into metal working check out Alec Steele, just search for the name. Kid is barely 21 and makes the most insane stuff from metal and is so smart. Has almost 2 million followers. Highly recommend his channel. Does a little woodworking.

Sent from my iPhone using Tapatalk

Rob Z · « **Reply #42 on:** December 24, 2019, 12:55 AM »

I like many of the channels already mentioned , but I didn't see two of my favorites: Mr. Chickadee and Engels Coach Shop.

http://www.youtube.com/channel/UCHkYrJ2Fbe7pBjEZvkFzi3A

http://www.youtube.com/user/EngelsCoachShop

demographic · « **Reply #43 on:** December 24, 2019, 02:50 AM »

Paul Sellers.
Izzy Swan.
Gosforth Handyman.
Not specifically chanels but just people I keep an eye open for and in no particular order.

Paul Millard.
Rob Cosman.
April Wilkison.
Essential Craftsman.
Dave Stanton.
New Brit Workshop.
Steve Ramsey.
Project Farm.
Frank Klausz.
Mathaius Wandel (spelling?).
There's a few others I've forgotten but these cover most of it.

Bob D. · « **Reply #44 on:** December 24, 2019, 04:14 AM »

"If you are into metal working check out Alec Steele"

Also TOT (This Old Tony) is a good machining and metalworking channel.

demographic · « **Reply #45 on:** December 24, 2019, 01:11 PM »

Quote from: Bob D. on December 24, 2019, 04:14 AM

"If you are into metal working check out Alec Steele"

Also TOT (This Old Tony) is a good machining and metalworking channel.

Aye, This Old Tony is great, well edited and a funny guy.

I can't watch loud people for long and much prefer the chilled out ones with the easy delivery.
Although Alec Steele is no doubt knowledgable, he still kind of gets on my nerves so I don't watch much of his stuff.

I liked Neil McKinley but it seems he's got sick of Youtube messing about so took a fair bit of his content away.

TinyShop · « **Reply #46 on:** December 28, 2019, 10:47 PM »

While researching the MFS I stumbled upon this prolific French YouTuber (in French with modest subtitles but lots of Festool-specific focus and, specifically, some unique jigs, genius workarounds and brilliant alternate uses for various Festool accessories):

...I mean, c'mon, how about the following for thinking outside the box (jig for holding guide rail at an angle in conjunction with OF1400)?

...another good representative example (using two guide rails in parallel with rods to guide OF1400):

...and yet another good representative example (using MFS Routing Slide as an impromptu free floating table widener for OF1400):

...and one more representative example (simple dust collection workaround when using the MFS Routing Slide and MFS):

www.youtube.com/watch?v=pJ4PkrJryLs&feature=youtu.be&t=62

...and, finally, one more representative example (using aluminium angle to improve clamping options in regards to the MFS):

Their main video page: http://www.youtube.com/user/boisetmetal/videos

jobsworth · « **Reply #47 on:** December 29, 2019, 05:00 PM »

@TinyShop

Oh yea I think his name is eric.

he used to post here.

Showed us some pretty cool jigs. His website is pretty cool to.

Nice guy

Samo · « **Reply #48 on:** February 02, 2020, 11:42 AM »

notenoughcash · « **Reply #49 on:** March 22, 2020, 09:58 AM »

does jackman works count?

StanB · « **Reply #50 on:** March 23, 2020, 08:37 PM »

Freebird interiors. Alistair explains his system for fitted furniture very well.

BigDan · « **Reply #51 on:** April 29, 2020, 01:55 PM »

Over the last few years, I have found most on this list are Thumbs up...
I would also like to add a few of my faves to the "great ones" you have all posted.

Rex Krueger - Woodworking for humans series is excellent. My favorite Youtube chanel. Frequent vids and excellent communicator.
Next Level Carpentry - Matt has been a carpenter for decades and is sharing much of his workflow and "how to" for those of us who weren't carpenters for 40+ years. Long videos and incredibly informative and good to watch.
A Glimpse Inside - Chris is very well presented and his work is solid and aligned to what my abilities are.
Third Coast Craftsman - excellent tool work and teaching.

I have hundreds subscribed but I find these along with Sellers, Ng, Farrington, Estlea and a few other are always the ones I look forward to and watch as soon as they come out.

Thanks
Dan

jobsworth · « **Reply #52 on:** April 30, 2020, 03:15 PM »

@BigDan

I have subscribed to Next level Carpentry for a while now,

good site lots of good info

FestitaMakool · « **Reply #53 on:** April 30, 2020, 04:14 PM »

There’s many already mentioned..
To a more technical approach there’s Building Guru, who does technique, tool tips, use and reviews. I find him/them experienced with straightforward no nonsense advise.

Building Guru:
http://www.youtube.com/channel/UC5x_K9gdHSoSJ14Mk5QaoQw

And Laura Kampf, who’s approach is more European/Scandinavian style, combined with practical ideas and engineering.

Laura Kamph:
http://www.youtube.com/channel/UCRix1GJvSBNDpEFY561eSzw

AvE: Not very woodworking, but for those who like how ie drills and various «tools» looks like inside, with massive mechanical learning in a very humorous way. Beware; he is not meant to be taken very seriously, but he has many good points in his “reviews”. Season that with “creative” vocabularies, “word wrenching” and a good portion of wisdom - and it becomes very entertaining with some learning

.

AvE:
http://www.youtube.com/user/arduinoversusevil

Bob D. · « **Reply #54 on:** May 16, 2020, 07:44 AM »

Tips From a Shipwright with Lou Sauzedde is a great YT channel about boatbuilding but you'll pick up some tips you can apply to anything. I've been watching for about a year now.

They are just starting their third series building a skiff.

This is the intro to the first series on building a work skiff. Second series covered building a sport dory.

There are some additional episodes covering how he's adapted tools to accomplish specific tasks such as progressive bevel sawing on his monster Navy surplus Crescent shipsaw which is a tilting arbor bandsaw.

ChuckM · « **Reply #55 on:** May 16, 2020, 11:19 AM »

For me, the best woodworking YouTube instructional videos are like this: https://youtu.be/5-B1G49Lphg?t=3

To the point, no verbal fillers, no loud background music, and no clowning around.

Mario Turcot · « **Reply #56 on:** May 16, 2020, 11:41 AM »

Is that your son @ChuckM

I watched the video and the next suggested video was

First time I see a video of the KS 60, saddly it's NANA. To those that own one can you tell if it deliver the same accuracy aand clean cut then the KS 120?

ChuckM · « **Reply #57 on:** May 16, 2020, 02:44 PM »

Quote from: Mario Turcot on May 16, 2020, 11:41 AM

Is that your son @ChuckM

No relationship except that...we're both woodworkers.

jobsworth · « **Reply #58 on:** June 08, 2020, 10:57 AM »

Just found (recommended to me by a english mate) a NZ carpenter. pletty good stuff different that what Im used to.

Scott Brown Carpentry has his own you tube channel.

Another good one is freebird carpentry English guy lots of good info on his channel to

Df1k1 · « **Reply #59 on:** June 08, 2020, 07:57 PM »

Just found this one. A good comb of power tools and hand tools. Super laid back and shows his mistakes.
KingPost Timberworks