Author Topic: ML Campbell Agualente or is there something better  (Read 289 times)

0 Members and 1 Guest are viewing this topic.

Offline rookie08

  • Posts: 208
ML Campbell Agualente or is there something better
« on: June 21, 2020, 10:47 AM »
So I have some Agualente primer and water based lacquer from way back when.  Have some built ins I need to spray ( Apollo 5 turbine). The Cambell had some seep through from the wood after a couple of years.  What do you guys use that you really like?  I’m using Birch plywood and poplar to build with.  I’d like a satin white finish.  Thank you!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline fignewton

  • Posts: 99
  • "Fine Quality Sawdust"
Re: ML Campbell Agualente or is there something better
« Reply #1 on: June 27, 2020, 10:25 AM »
I’m doing kitchen cabinet shaker doors using soft maple for rails and stiles, and MDF for panels.  I have a Fuji MM4 Platinum system, and experimented with Sherwin Williams Emerald, then BM Advance, and am now sold on General Finishes Enduro White Poly in satin.  This stuff is beautiful, and you can overcoat in 2 hours.  I’m using their white primer, which covers the dark brown MDF in one coat, but I’m doing 2 coats, then waiting 24 hours before using the poly.  This is all waterborne so cleanup is pretty easy.  The satin gives a nice soft finish.  My bride is very happy with the results.
TS55, MFT3+, OF1400, C12, CT-26, LR-32 system, Domino 500, RO125, MFK 700, Carvex w/ accsy, Sys-roll,  CXS, Kapex, UG with extensions, RO90

Offline rookie08

  • Posts: 208
Re: ML Campbell Agualente or is there something better
« Reply #2 on: June 27, 2020, 12:28 PM »
Sounds good.  I may try that as well.  I found some info on a company called Renner while I was doing more research and they got pretty good reviews also; you can only order it online I believe.  Thanks for the info!