Author Topic: FYI Osmo PolyX Hard was oil fades and yellows in sunlight  (Read 1143 times)

0 Members and 1 Guest are viewing this topic.

Offline Michael Kellough

  • Posts: 4731
De-installed a sculpture that had been on view in a sunlit area in a museum for nearly two years. When some elements of the sculpture were removed for packing it was clear that the finish had faded and yellowed. You can even see “shadows” trailing away on the shadow side.

Two coats of Osmo PolyX Hard Wax Oil was applied to rift sawn white oak sanded to 180 grit.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


  • Posts: 422
Re: FYI Osmo PolyX Hard was oil fades and yellows in sunlight
« Reply #1 on: June 11, 2019, 09:16 PM »
Try Odies  Oil  [wink]