Author Topic: Fridge built in, Question about 4x8 plywood vaneer sheets  (Read 571 times)

0 Members and 1 Guest are viewing this topic.

Offline KG29

  • Posts: 27
Hi,

I've been wanting to complete this project for sometime now, I just don't know what Grade of 4x8 plywood sheets with a maple veneer kitchen builders often use. I also still have my 30x15 upper cabinet I need to modify for more depth, it's time
I finally start it. [wink]

I was Quoted over $100.00 for one Grade A sheet years ago.

I hope to post some pictures today showing the cabinet colour & the filer strip I have as i don't know if its maple or not, my next topic will be about staining as lost in the subject [eek]

I was sold a Hybrid stain, but read you must apply a sealer to maple before staining anything.

thank you [smile]

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline morts10n

  • Posts: 257
Re: Fridge built in, Question about 4x8 plywood vaneer sheets
« Reply #1 on: June 07, 2020, 02:53 PM »
A-1 is the most common....Classic Core is usually a lot high quality sheet than veneer core. On West Coast one sheet is about $70

Offline Cheese

  • Posts: 7511
Re: Fridge built in, Question about 4x8 plywood veneer sheets
« Reply #2 on: June 07, 2020, 04:14 PM »
A sealer is typically used first on maple, birch & pine to prevent the stain from becoming blotchy.

Offline KG29

  • Posts: 27
Re: Fridge built in, Question about 4x8 plywood vaneer sheets
« Reply #3 on: June 12, 2020, 09:03 PM »


« Last Edit: June 12, 2020, 09:20 PM by KG29 »