Author Topic: Best Wood Filler  (Read 642 times)

0 Members and 1 Guest are viewing this topic.

Offline Bugsysiegals

  • Posts: 269
Best Wood Filler
« on: September 15, 2019, 02:25 PM »
I’m working on some shop cabinets and accidental plunged all the way through the sides of the cabinets with the Domino. I don’t intend to hide the mistakes but before I can finish the cabinet I’d like to fill these holes and am wondering the best method/product(s)?

Some holes are in the Maple plywood and others are in the Walnut edge banding. Is there a wood filler which would match somewhat close to these colors? If not, would it make sense to fill with a wood filler of some sort near the surface and then mix wood glue and dust from the CT36 as a top coat to try and match more closely?  Any other thoughts?

Using the OF1100 to flush trim the edge banding, kids started running upstairs, distracted me, I let the router dip down, and gouged the to deep ... SMH.
304457-0

Using 40mm Domino's and messed up the split of 25 for plywood side and 15mm for edge banding side.  Future Domino's will be 30mm to avoid this mistake.
304459-1

304461-2

304463-3
« Last Edit: September 17, 2019, 09:02 AM by Bugsysiegals »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline live4ever

  • Posts: 825
Re: Best Wood Filler
« Reply #1 on: September 15, 2019, 04:19 PM »
Dutchman

Good skill to practice.  Domino blowouts are a perfect use case.  DAMHIKT.
Current systainer to productivity ratio:  very high

Offline ScotF

  • Posts: 2677
Re: Best Wood Filler
« Reply #2 on: September 15, 2019, 05:03 PM »
I use epoxy - both tinted and clear - System 3 quick cure is my choice for small gap filling and holes. Sands to same sheen as wood and oil finish goes over just fine.

Offline jobsworth

  • Posts: 5843
  • Festool Baby.....
Re: Best Wood Filler
« Reply #3 on: September 15, 2019, 05:56 PM »
Not seeing a photo, I think there are couple of ways to do this, one is to glue a domino in the hole sand it flush, the other is use wood bondo, I just thought of using a colored epoxy that dries rock hard you can color match to the wood.

Heres the link to the epoxy I was talking about

https://woodrepairproducts.com/product/epoxy-putty-stick/

« Last Edit: September 15, 2019, 06:00 PM by jobsworth »

Offline Bugsysiegals

  • Posts: 269
Re: Best Wood Filler
« Reply #4 on: September 17, 2019, 04:20 PM »
Thanks for the replies, I’d not considered epoxy ... I’ll have a look at that!

Offline jobsworth

  • Posts: 5843
  • Festool Baby.....
Re: Best Wood Filler
« Reply #5 on: September 18, 2019, 12:36 PM »
Its made by MoHawk Finishes. Dies very fast and is very strong. When I took one of their classes the Rep told us it can be used to repair screw holes in entry doors. Once it dries sand flush and its stronger than te base material, can be drilled and holds screws.

Plus it can be mixed and matched with other colors to match the color of the stain you are using.

Pretty good stuff.

I got a strike plate on my front door with a screw hole thats to big for the existing screw so Im going to use some to repair that.