Author Topic: 3M PPS Series 2 - Fuji  (Read 6389 times)

0 Members and 2 Guests are viewing this topic.

Offline jparker

  • Posts: 6
3M PPS Series 2 - Fuji
« on: June 17, 2018, 09:00 PM »
Does anyone happen to know if the 3M PPS Series 2 is going to have a H/O cup that will work with Fuji?  3M lists Series 2 adapters for Fuji guns but I don’t see any H/O cups available.

Thanks

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline ben_r_

  • Posts: 1206
Re: 3M PPS Series 2 - Fuji
« Reply #1 on: June 17, 2018, 09:41 PM »
Is the series 2 a new version of the PPS system? I didnt know they came out with a new one.
If at first you don't succeed, redefine success!

Offline duburban

  • Posts: 1041
Re: 3M PPS Series 2 - Fuji
« Reply #2 on: June 17, 2018, 10:57 PM »
I just went all-in on series 1... No wonder there was confusion regarding the measuring markings during my shopping process...
helper: i used a festool "circular saw" to do something simple and it made it really hard

me: exactly, it makes simple cuts complicated and complicated cuts simple

Offline JCLP

  • Posts: 895
Re: 3M PPS Series 2 - Fuji
« Reply #3 on: June 18, 2018, 06:01 AM »
Series 2 requires new adapters for the new pressure cups, liners and lids. 3M in Canada, will exchange the adapters free of charge but you have to purchase the new cup and lids.

Cheers,
JC

Offline RKA

  • Posts: 1720
Re: 3M PPS Series 2 - Fuji
« Reply #4 on: June 18, 2018, 09:56 AM »
I just went all-in on series 1... No wonder there was confusion regarding the measuring markings during my shopping process...

Same here.  I saw v2.0, but couldn't find the H/O cups and gave up.  I suspect they may release them eventually, but for now, nada.
-Raj

Offline ben_r_

  • Posts: 1206
Re: 3M PPS Series 2 - Fuji
« Reply #5 on: June 18, 2018, 10:58 PM »
Whats the improvement for the Series 2 stuff? I recently bought all the Series 1 setup but havent even opened it all yet.
If at first you don't succeed, redefine success!


Offline ben_r_

  • Posts: 1206
If at first you don't succeed, redefine success!

Offline ben_r_

  • Posts: 1206
Re: 3M PPS Series 2 - Fuji
« Reply #8 on: June 19, 2018, 11:26 AM »
A Fuji gun takes either a #S18 or a #S2.

https://multimedia.3m.com/mws/media/1451272O/pps-2-0-spray-cup-system-part-number-reference-guide.pdf
Looks like unless you have a Fuji G-XPC gun. That one looks to take the 26110 #S24 adapter.
If at first you don't succeed, redefine success!

Online Cheese

  • Posts: 6383
Re: 3M PPS Series 2 - Fuji
« Reply #9 on: June 19, 2018, 11:27 AM »
I'm surprised 3M doesn't offer an adapter for the Graco handheld spray guns.  [sad]

Especially as they are both Minnesota based companies.
« Last Edit: June 19, 2018, 11:29 AM by Cheese »

Offline Dick Mahany

  • Posts: 505
Re: 3M PPS Series 2 - Fuji
« Reply #10 on: June 19, 2018, 11:40 AM »
I've held off investing in the 3M PPS wondering if it is a worthwhile enhancement.  Now maybe it's time to pull the trigger for my Fuji MM3 / T75 gun.
« Last Edit: June 19, 2018, 11:59 AM by Dick Mahany »

Offline ben_r_

  • Posts: 1206
Re: 3M PPS Series 2 - Fuji
« Reply #11 on: June 19, 2018, 12:22 PM »
I've held off investing in the 3M PPS wondering if it is a worthwhile enhancement.  Now maybe it's time to pull the trigger for my Fuji MM3 / T75 gun.
From everything Ive ever read or heard the Series 1 was definitely worth it, which was why I jumped on it. After doing a bit of research on this Series 2.0, it doesnt look like the parts are all available yet. Just some quick google searches didnt show any resellers selling the parts.
If at first you don't succeed, redefine success!

Offline jparker

  • Posts: 6
Re: 3M PPS Series 2 - Fuji
« Reply #12 on: June 19, 2018, 04:33 PM »
I reached out to 3M Customer Service and I was told that they plan to release an H/O cup but that no release date has been set.

Offline koenbro

  • Posts: 69
Re: 3M PPS Series 2 - Fuji
« Reply #13 on: June 26, 2018, 12:45 AM »
The PPS system is definitely worth it. Swap out finishes easily with much less cleaning. Will never go back.


Sent from my iPhone using Tapatalk
MFT/3 • TS 55 REQ • Carvex PS420 EBQ + Accessories • OF1400 + LR32 + MFS400 • Domino DF500 • ETS EC150/5 EQplus • DTS 400 REQplus • CXS • CT 26E • Fuji Q4 + 3M PPS

Offline fnhanks

  • Posts: 1
Re: 3M PPS Series 2 - Fuji
« Reply #14 on: June 09, 2019, 03:11 PM »
Has anyone heard any more here? Want to get the PPS system for my Q5 but with the 2.0 being out I’m hesitant.

Offline ddjeske

  • Posts: 12
Re: 3M PPS Series 2 - Fuji
« Reply #15 on: June 28, 2019, 02:49 PM »
Has anyone heard any more here? Want to get the PPS system for my Q5 but with the 2.0 being out I’m hesitant.

I just ordered and received the 2.0 22 oz H/O cup
(https://www.rshughes.com/p/3M-850-Ml-Pressurized-Cup-26124/051131_26124/)

and the 2.0 22 oz kit

(https://www.amazon.com/3M-Spray-System-Micron-Filter/dp/B0070FK92W/ref=sr_1_1?keywords=3m+pps+2.0+26000&qid=1561747727&s=automotive&sr=1-1)

for my Q5 along with the adapter (s2c)

I plan on getting the 2.0 13.5 oz size also once the H/O cup is available for that size, which should be soon (since I have some inside information....)
« Last Edit: June 28, 2019, 03:16 PM by ddjeske »

Offline Mike Goetzke

  • Posts: 320
Re: 3M PPS Series 2 - Fuji
« Reply #16 on: June 28, 2019, 03:13 PM »
I just ordered and received the 2.0 22 oz H/O cup
(https://www.rshughes.com/p/3M-850-Ml-Pressurized-Cup-26124/051131_26124/)

and the 2.0 22 oz kit

(https://www.amazon.com/3M-Spray-System-Micron-Filter/dp/B0070FK92W/ref=sr_1_1?keywords=3m+pps+2.0+26000&qid=1561747727&s=automotive&sr=1-1)

for my Q5 along with the adapter (s2c)

I plan on getting the 2.0 13.5 oz size also once the H/O cup is available for that size, which should be soon (since I have some inside information....)

I have the original system - was thinking of upgrading until I saw these prices!

Offline ddjeske

  • Posts: 12
Re: 3M PPS Series 2 - Fuji
« Reply #17 on: June 28, 2019, 03:23 PM »
I bought my Q5 late last year and held off on getting v1, knowing 2.0 was going to be coming.

Offline Cyisone01

  • Posts: 3
Re: 3M PPS Series 2 - Fuji
« Reply #18 on: July 18, 2019, 06:18 PM »
I was looking at the 3M PPS 2.0 - does it work with the fuji guns?  I have the Q5 with the T70 and T75g.  I am not sure what I should be ordering.  I contacted Fuji and they told me the series 2.0 was not compatible but from your comments above it may be?
« Last Edit: July 18, 2019, 06:25 PM by Cyisone01 »

Offline Jackarcher

  • Posts: 1
Re: 3M PPS Series 2 - Fuji
« Reply #19 on: August 21, 2019, 02:39 PM »
In direct reference to the T75G, Speaking with a 3m rep they have advised me that the 650ml (22oz) pressure cup for the PPS 2.0 system is part number 26124. It will officially be release in September 2019.  They did suggest I call retailers to see if they have them in stock now, but I haven’t had luck as yet. I’m in the US, not sure what the timing is elsewhere.

I have seen sites advertising the cups for sale, but I’m not familiar with the sites I’ve seen them for sale on.  I am curious to see how the price compares to these sites once it’s officially released and more widely available.
« Last Edit: August 21, 2019, 02:58 PM by Jackarcher »

Offline ddjeske

  • Posts: 12
Re: 3M PPS Series 2 - Fuji
« Reply #20 on: August 22, 2019, 10:27 AM »
I bought my 2.0 (22oz) pressurized cup from R.S. Hughes.  Came fairly quick, quicker than they quoted me.

https://www.rshughes.com/p/3M-850-Ml-Pressurized-Cup-26124/051131_26124/

Offline DynaGlide

  • Posts: 476
Re: 3M PPS Series 2 - Fuji
« Reply #21 on: September 20, 2019, 09:30 AM »
Any further information on the 2.0 and Fuji release availability?

By the way the lid and liner kit @ddjeske linked to #26000 is for their 200 micron filters (white). I'll be doing waterborne so I believe I'll need #26301 per https://multimedia.3m.com/mws/media/1451272O/pps-2-0-spray-cup-system-part-number-reference-guide.pdf

as well as #26003 S2C adapter for the T75G gun and #26124 H/O 28oz cup 2.0.

Anything I'm missing?

Edit: I called Fuji and they won't have the new system to play with until later this year. Then I called 3M and ended up with a very friendly and knowledgeable woman. She said the H/O 2.0 cup is currently available in 6oz and 28oz. She strongly recommended not using the 22oz liners I linked above in the 28oz cup as they may not be properly supported and if you're using a heavier paint for example it could cause the liner to crack. She mentioned they were told there are manufacturing issues on the H/O cups and to expect stock late September but if I can find one there are no known design changes just that 'something' caused a delay in manufacturing. So for me using the T75G:

#26003 S2C adapter
#26325 28oz lids and liners
#26124 28oz H/O cup
« Last Edit: September 20, 2019, 10:00 AM by DynaGlide »
Instagram @matts.garage