Author Topic: Reciprocating Saw  (Read 4665 times)

0 Members and 1 Guest are viewing this topic.

Offline JG

  • Posts: 46
Reciprocating Saw
« on: September 08, 2021, 07:53 AM »
I expect this has been mentioned before, but when is Festool going to release a reciprocating saw.  A a reciprocating saw is an essential tool for all remodelers.
Jim

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline notenoughcash

  • Posts: 244
  • too many ideas, not enough cash....
Re: Reciprocating Saw
« Reply #1 on: September 08, 2021, 08:59 AM »
it has been discussed before, but the general concesnsus was no because festool is a fine woodworking company [sad]

but it would be awesome to have a cordless one of them with a AC adaptor as dust extracton.
turns out that woodworking is 1% making things you'll use, 4% making bespoke high end firewood, 15% cleaning, and 80% looking for the blinking thing you just put down
PSC 420 EB, TSC 55 REB, CTL MIDI I

Offline squall_line

  • Posts: 1423
Re: Reciprocating Saw
« Reply #2 on: September 08, 2021, 09:37 AM »
it has been discussed before, but the general concesnsus was no because festool is a fine woodworking company [sad]

but it would be awesome to have a cordless one of them with a AC adaptor as dust extracton.

Extraction on a reciprocating saw would be a blessing indeed, although many of the solutions that are out there tend to get in the way of either visibility or usability for the blade itself, since it's usually a plunge action.

The presence of HK55 and HK85, as well as the insulation saw, demolition drills, and a few EU-only tools opposes the idea that Festool is only for fine woodworking, though.  IMO.

Offline Jhruv

  • Posts: 7
Re: Reciprocating Saw
« Reply #3 on: September 09, 2021, 02:20 AM »
Agree with you, It should be great if new tools from Festool!
Currently, I'm using DeWALT Reciprocating Saw, and it's working well.

Offline notenoughcash

  • Posts: 244
  • too many ideas, not enough cash....
Re: Reciprocating Saw
« Reply #4 on: September 09, 2021, 03:59 AM »

The presence of HK55 and HK85, as well as the insulation saw, demolition drills, and a few EU-only tools opposes the idea that Festool is only for fine woodworking, though.  IMO.

huuuummmmm yeah, i forgot about that.

a lot of their tools are based around finewoodworking and shop work, but people can and do use them on site, such as i saw some fencing guys with a ks60 and i use a psc and a tsc on site
turns out that woodworking is 1% making things you'll use, 4% making bespoke high end firewood, 15% cleaning, and 80% looking for the blinking thing you just put down
PSC 420 EB, TSC 55 REB, CTL MIDI I

Offline Alex

  • Posts: 7785
Re: Reciprocating Saw
« Reply #5 on: September 09, 2021, 04:12 AM »
Here you find Festool on every building site. A Repro saw wouldn't stand out.

Offline Spandex

  • Posts: 271
Re: Reciprocating Saw
« Reply #6 on: September 09, 2021, 04:33 AM »
Indeed. Oscillating multitools, angle grinders and impact drivers aren’t fine woodworking tools. In fact, Festool have always positioned themselves more as a site brand than a workshop brand, focusing, as they do, on portability.

I’d like to see a cordless Festool recip saw, if only to avoid another battery platform.

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 9966
  • Finger Lakes Region, NY State , USA
Re: Reciprocating Saw
« Reply #7 on: September 09, 2021, 09:44 AM »
Was there ever a reciprocating saw in the ProTool line?



Seth

Offline squall_line

  • Posts: 1423
Re: Reciprocating Saw
« Reply #8 on: September 09, 2021, 10:28 AM »
Was there ever a reciprocating saw in the ProTool line?

Seth

TIL that ProTool has their own EKAT.

And I learned that yes, they had a "Sabre Saw", the SSP 11E

They also had a track chainsaw.

Offline mrB

  • Posts: 923
Re: Reciprocating Saw
« Reply #9 on: September 09, 2021, 11:15 AM »
Festool continued the track chain saw from protool
there's nothing like the right tool for the job

Offline don007

  • Posts: 1
Re: Reciprocating Saw
« Reply #10 on: February 15, 2022, 02:11 PM »
it's on its way I have heard. at least in the eu. but when ? it is if in the test phase

Offline _Ben_

  • Posts: 46
Re: Reciprocating Saw
« Reply #11 on: February 19, 2022, 06:02 AM »
Fingers crossed!

Offline RussellS

  • Posts: 332
Re: Reciprocating Saw
« Reply #12 on: February 20, 2022, 02:27 AM »
My opinion on a Festool reciprocating saw.  Cordless yes.  To fit the same batteries of the drills and drivers and track saw.  Not really because its needed but why not since it would be easy and cheap to do.  And it would use the same batteries all the other tools do.  Do it.  As for an electric reciprocating saw, NO.  No need.  Milwaukee Sawzall is the old gold standard for reciprocating saws.  And anyone who wants an electric reciprocating saw can just buy a Milwaukee.  Or one of the others already out there.  And reciprocating saws are mainly for tearing stuff up.  So no need for a nice Festool one.  Any electrical reciprocating saw is more than good enough.  There is nothing "precise" about a reciprocating saw.  You just stick it in and cut cut cut.  Doesn't matter what you are cutting or where.  Just cut cut cut.
« Last Edit: February 20, 2022, 11:42 PM by RussellS »

Offline mino

  • Posts: 978
Re: Reciprocating Saw
« Reply #13 on: February 24, 2022, 04:41 AM »
...
There is nothing "precise" about a reciprocating saw.
...
Possibly there is a market for Festool to make a recip saw that will be precise. Some special base/accessory vecturo-style, and hey, we have a precise recip saw with functional dust extraction!

Can dream, right ?
When The Machine has no brains, use yours.

Offline notenoughcash

  • Posts: 244
  • too many ideas, not enough cash....
Re: Reciprocating Saw
« Reply #14 on: February 24, 2022, 12:01 PM »
DC on a recip saw, maybie.

but recep saws beeing used for anything precision is just laffable can u imagin it

colins copeing foot for the RSC 20 (stroke length) to do skirting!  angle base for those precision angle cuts during demolition!  it all quite amusing realy.

if you want a beast of a recip, look at the hikoki godzilla, or the new makita XGT one coming out the JR002 i think.  i dont think the majority of tradies would look at one, and kitchen fitters who are the main people to have cordless FT gear, they dont use a recip.  and for the plumber and sparky arguments, i have seen neither with festool, plenny of makita, durwalt of milwaukee about tho
turns out that woodworking is 1% making things you'll use, 4% making bespoke high end firewood, 15% cleaning, and 80% looking for the blinking thing you just put down
PSC 420 EB, TSC 55 REB, CTL MIDI I

Offline Coen

  • Posts: 1615
Re: Reciprocating Saw
« Reply #15 on: February 24, 2022, 04:09 PM »
It's more for demolition..

I've used mine to cut Ikea steel rails and to cut aerated concrete. But the one I have is a beast to handle and I found the blades start to flop way too easily.

Offline mino

  • Posts: 978
Re: Reciprocating Saw
« Reply #16 on: February 25, 2022, 09:22 AM »
DC on a recip saw, maybie.

but recep saws beeing used for anything precision is just laffable can u imagin it
...
Well, we are using the jigsaws for lots of semi-precise work after all ... heh. And with a thicker blade, there is nothing preventing a recip saw to be at least as precise with a base.

It would look weird, possibly, but no reason it cannot work for cutting beams.
When The Machine has no brains, use yours.

Offline notenoughcash

  • Posts: 244
  • too many ideas, not enough cash....
Re: Reciprocating Saw
« Reply #17 on: February 25, 2022, 09:44 AM »

It would look weird, possibly, but no reason it cannot work for cutting beams.

chainsaw, or that swordsaw, or the makita XGT 260mm saw
turns out that woodworking is 1% making things you'll use, 4% making bespoke high end firewood, 15% cleaning, and 80% looking for the blinking thing you just put down
PSC 420 EB, TSC 55 REB, CTL MIDI I