Author Topic: CXS\TXS Offset Chuck  (Read 3218 times)

0 Members and 1 Guest are viewing this topic.

Offline JG

  • Posts: 20
CXS\TXS Offset Chuck
« on: June 25, 2019, 04:52 PM »
I noticed some recent news that in the fall of 2019 Milwaukee will release as part of its M12 lineup an installation driver/drill.   This tool looks very similar to the CXS.  It has the same overall shape as well as attachments.  At a price of approx $179 for the bare tool, it will provide some competition.

https://toolguyd.com/new-milwaukee-m12-fuel-cordless-installation-drill-driver/

I also note it includes as part of its package an offset chuck.  It makes me wonder why Festool does not offer the offset chuck as part of its CXS\TXS tools.  When Bosch offered its competition to the CXS\TXS, it also included an offset chuck. 

An offset chuck is very useful in drawer and cabinet installation/construction.  The larger torque 15V or 18V is large and awkward in this type of an application. The smaller CXS\TXS is easier to handle.  Hopefully Festool will eventually offer an offset chuck to work in CXS\TXS drivers. 
 

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Stunt

  • Posts: 14
Re: CXS\TXS Offset Chuck
« Reply #1 on: June 28, 2019, 01:18 PM »
Not having an offset Chuck was the only drawback to the CXS I saw.
Here's hoping Festool decided to fix that.

I do like Milwaukee tools and an impressed by what they are putting out.

Offline six-point socket II

  • Posts: 1041
  • aka @the_black_tie_diyer
Re: CXS\TXS Offset Chuck
« Reply #2 on: June 28, 2019, 01:49 PM »
Hi!

This was discussed multiple times over the years.

Festool USA chimed in on it here, for example: http://festoolownersgroup.com/festool-tool-reviews/a-few-thoughts-on-the-cxs-(time-for-me-to-eat-crow)/msg155947/#msg155947

And then there was this thread, too. For example: http://festoolownersgroup.com/festool-tools-accessories/t183-set-vs-bosch-12v-flexiclick/msg528548/#msg528548

Have you used the CXS?

The reason I ask this is because I have used mine plenty. And to this day I can't see any need for an offset chuck for it. The way it is build, and the way the angle attachment is build (it has a highly compact head) you can reach any if not all fasteners with it - whereas the Bosch, Milwaukee, (...) are itself, and this holds also true for their corresponding angle chucks, not nearly as compact as the CXS (+angle chuck).

I stand by what I wrote back in the day, it's not needed by design - and I'm also pretty sure an offset chuck would not get a CXS closer to any fastener.

Kind regards,
Oliver
Kind regards,
Oliver

Offline wood pulp

  • Posts: 285
  • Each another's audience...
Re: CXS\TXS Offset Chuck
« Reply #3 on: July 23, 2019, 02:31 PM »
Looking forward to this offering by Milwaukee!

Offline Jim Kirkpatrick

  • Posts: 1105
    • Jim Kirkpatrick Woodworking
Re: CXS\TXS Offset Chuck
« Reply #4 on: September 26, 2019, 04:49 PM »
The new Milwaukee Installers Drill is out in another week or so.  It looks an awful lot like the CXS.  About the only difference besides the lower price is an offset chuck, a brushless motor and up to 300 ft. lbs. of torque. 
I'll say as a post script that my CXS is my favorite and most used Festool.  But it's nice to see another option.
http://www.youtube.com/watch?time_continue=88&v=bJ3Puc8Q6h0

Offline RKA

  • Posts: 1776
Re: CXS\TXS Offset Chuck
« Reply #5 on: September 26, 2019, 06:55 PM »
300 ft lbs of torque!!   [eek]. That’ll make changing a tire a snap! 
(we know what you meant). :)
-Raj

Offline rst

  • Posts: 2250
Re: CXS\TXS Offset Chuck
« Reply #6 on: September 26, 2019, 07:07 PM »
I love my Festool drills as they are so much smoother than other drills.  I've been using cordless tools since they were first available, the original B&D industrial back in the late 70s.  I've used those, Freud, went to Makita, tried the 12 Bosch (bought for my daughter because of the compact size), bought the 12v Milwaukee when they came out to compliment my Makita 14s.  When my 14v Maks bellied up I went to 18v Milwaukee.  I have extensive collection of 12 and 18v Milwaukees but also have 18v Feins, and my Festools.  I love my CXS but am planning on buying the new bare tool 12v Milwaukee with the interchangeable chucks when they go on sale during the holidays.

Online Shane Holland

  • Festool Dealer
  • *
  • Posts: 10699
    • The Tool Nut's Festool Store
Re: CXS\TXS Offset Chuck
« Reply #7 on: September 26, 2019, 09:09 PM »
The new Milwaukee Installers Drill is out in another week or so.

We got notification that we will be receiving the new Milwaukee drill any day now. Doug did a recent review of it on Instagram.
Buy Festool Online" class="bbc_img
Fast, Free Shipping - Festool Trained Experts - Unparalleled Customer Service
Toolnut.com and FestoolProducts.com
877-866-5688

Offline JG

  • Posts: 20
Re: CXS\TXS Offset Chuck
« Reply #8 on: November 10, 2019, 12:08 PM »
I picked up mine because I am already on the 12v Milwaukee platform.  Its a well build tool but not as smooth as the CXS which I love and use all the time. Considering the price difference, it is a good addition to my toolbox.  I would prefer the FWD/REV switch by the trigger.  If you hold the drill with your index finger outstretched and your middle finger on the trigger, it is pretty easy to access the FWD/REV switch using your thumb.

I noticed some other post mentioning a Milwaukee promotion where they give you a free 6ah battery with a purchase of this tool.  HD originally had the deal online only.  This deal is now available in the HD stores in the states.

Offline JG

  • Posts: 20
Re: CXS\TXS Offset Chuck
« Reply #9 on: November 10, 2019, 12:39 PM »
No sooner did I upload this post and my wife asked me to install a hanger for her stick vacuum.  Needed the offset adapter to install it.  Timing is everything.  Hopefully, Festool will soon offer an offset adapter for the CXS/TXS.

Offline xedos

  • Posts: 103
Re: CXS\TXS Offset Chuck
« Reply #10 on: November 10, 2019, 09:42 PM »
Festool will never offer an offset chuck for the CXS/TXS.   They don't think it's needed.

They can't even be bothered to upgrade the drills to a brushless motor.  Another chuck is a pipedream.