Author Topic: Batterycharger in a Systainer!!  (Read 3084 times)

0 Members and 1 Guest are viewing this topic.

Offline amcore

  • Posts: 46
Batterycharger in a Systainer!!
« on: June 22, 2020, 08:31 AM »
I want to see Fast Battery Charger for the 18volt line in a T-Loc systainer, for 2 or 4 batterys.. Maybe whit the base from the Powerhub so there is outlets to? USB outlet and Bluetooth connectivity to check the health of the batterys

Brainstorming now but also a digital display that show how long the charging process go in % instead of a bounch of small lights, also the health of the battery

now i have 8 batterys and 5 chargers and its frustating every time. [huh]

Well thats my tougts  ;D :P..
Festool addicted!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Cypren

  • Posts: 35
Re: Batterycharger in a Systainer!!
« Reply #1 on: July 12, 2020, 07:26 PM »
This is a great idea, and now you've got me mulling over ideas for building a custom version, since I don't think Festool's going to give us a multi-charger anytime soon. Anyone have a suggestion for good sources to find broken tools to scrap for parts? Getting a plug-it port to use for the external power would be ideal.

Offline threesixright

  • Posts: 600
Re: Batterycharger in a Systainer!!
« Reply #2 on: July 13, 2020, 04:04 AM »
This is a great idea, and now you've got me mulling over ideas for building a custom version, since I don't think Festool's going to give us a multi-charger anytime soon. Anyone have a suggestion for good sources to find broken tools to scrap for parts? Getting a plug-it port to use for the external power would be ideal.
Not sure if that  is same thickness as a SYS PH external cable.

Maybe in EKAT you can find a plugit connector. Isn’t  this connector proprietary FT?


Sent from my iPhone using Tapatalk

Offline jonnyrocket

  • Posts: 73
Re: Batterycharger in a Systainer!!
« Reply #3 on: July 13, 2020, 06:17 PM »
@amcore  I couldn’t agree more. I have 2 dedicated systainers that house my batteries and chargers. Now I make sure these come with me regardless of which tools I grab.

I like the idea about a percentage display...one for the charger hub but also a similar system for the storage case. It would be cool but doubt it will happen.

My current method is to rotate discharged batteries to the back of the case and keep the charged ones in front.
« Last Edit: July 13, 2020, 06:35 PM by jonnyrocket »

Offline Bob D.

  • Posts: 1791
Re: Batterycharger in a Systainer!!
« Reply #4 on: July 14, 2020, 04:01 PM »
Those Wago lever nuts are great aren't they?
-----
It's a table saw, do you know where your fingers are?

Offline jonnyrocket

  • Posts: 73
Re: Batterycharger in a Systainer!!
« Reply #5 on: July 14, 2020, 06:37 PM »
Wahl Lever nuts are the best thing since ground crimp sleeves :)

Offline SRSemenza

  • Global Moderator
  • *
  • Posts: 9376
  • Finger Lakes Region, NY State , USA
Re: Batterycharger in a Systainer!!
« Reply #6 on: July 23, 2020, 10:13 AM »
Good topic  .... Wago. Should be useful to be able to refer to it easily.

               Split to  here ------> Wago wire connector nuts.

Seth
« Last Edit: July 23, 2020, 10:20 AM by SRSemenza »

Offline ToolGuy42

  • Posts: 4
Re: Batterycharger in a Systainer!!
« Reply #7 on: July 24, 2020, 02:17 PM »
This is a great idea!

Offline Gregor

  • Posts: 1743
Re: Batterycharger in a Systainer!!
« Reply #8 on: August 04, 2020, 07:47 AM »
I would add a cord grip to the green cable (likely attached to the woordenbaseplate or the systainer iteself) to prevent tripping over a connected plug-it ripping at the cables of the chargers.