« previous next »
Pages: 1 ... 68 69 70 71 72 73 74 75 76 77 [78]  All   Go Down

Author Topic: What Festool Did You buy Today?  (Read 691927 times)

0 Members and 1 Guest are viewing this topic.

Offline Lincoln

  • Posts: 238
Re: What Festool Did You buy Today?
« Reply #2310 on: June 22, 2022, 07:41 PM »
A cheap addition, but will help organise - Sys3 insert for both TID18 and C18. Will be nice to get them both in one systainer.
Not so cheap addition - HKC55 set.
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline jcameron42

  • Posts: 17
  • I was made to create!
Re: What Festool Did You buy Today?
« Reply #2311 on: June 22, 2022, 08:58 PM »
Today I purchased a FS1400/2-LR32-55"(1400 mm)Guide Rail



Sent from my iPad using Tapatalk Pro
Logged
MFT-3, TS 55 REQ, OF 1400 EQ, LR32 HOLE DRILLING SET,  DOMINO DF 500 Q-SET + DOMINO SYS, DOMINO XL DF 700, DOMINO XL CONNECTOR SET, DOMINO DF 500 CONNECTOR SET, CT MINI, CARVEX PS 420 EBQ-PLUS, CARVEX ACCESSORY SET, PDC 18/4 QUADRIVE, CXS LI 2.6 - SET, TID 18 IMPACT DRIVER, SYS-CENTROTEC 2015, ZOBO FORSTNER STYLE BIT SET, HL850 PLANER, ROTEX RO 150, ETS 125 EQ 5, ETS EC 150/3 EQ-PLUS, SURFIX OS SYS3/SET, SYS-NWZ, GUIDE RAIL ACCESSORY KIT, SYSLITE LED LAMP, SYSROLL, SYS-COMBI 2, SORTAINER SYS 4, PARALLEL GUIDE SET, KAPEX KS 120, KAPEX UG-KA-SET, VECTURO OS 400 EQ SET, CMS-GE, CT26 E, CT BOOM ARM SET, CT REMOTE CONTROL,

Offline Blues

  • Posts: 158
Re: What Festool Did You buy Today?
« Reply #2312 on: June 23, 2022, 05:18 AM »
Quote from: oberlin1 on May 03, 2022, 10:03 AM
STM1800 should arrive today.

Hope it is as useful for my needs as planned!
I got my STM1800 today. Im short on space.. hope this helps. And it would fit under my mft.
Logged

Offline jcameron42

  • Posts: 17
  • I was made to create!
Re: What Festool Did You buy Today?
« Reply #2313 on: June 23, 2022, 02:12 PM »
Quote from: Blues on June 23, 2022, 05:18 AM
Quote from: oberlin1 on May 03, 2022, 10:03 AM
STM1800 should arrive today.

Hope it is as useful for my needs as planned!
I got my STM1800 today. Im short on space.. hope this helps. And it would fit under my mft.

where'd you get it from?
Logged
MFT-3, TS 55 REQ, OF 1400 EQ, LR32 HOLE DRILLING SET,  DOMINO DF 500 Q-SET + DOMINO SYS, DOMINO XL DF 700, DOMINO XL CONNECTOR SET, DOMINO DF 500 CONNECTOR SET, CT MINI, CARVEX PS 420 EBQ-PLUS, CARVEX ACCESSORY SET, PDC 18/4 QUADRIVE, CXS LI 2.6 - SET, TID 18 IMPACT DRIVER, SYS-CENTROTEC 2015, ZOBO FORSTNER STYLE BIT SET, HL850 PLANER, ROTEX RO 150, ETS 125 EQ 5, ETS EC 150/3 EQ-PLUS, SURFIX OS SYS3/SET, SYS-NWZ, GUIDE RAIL ACCESSORY KIT, SYSLITE LED LAMP, SYSROLL, SYS-COMBI 2, SORTAINER SYS 4, PARALLEL GUIDE SET, KAPEX KS 120, KAPEX UG-KA-SET, VECTURO OS 400 EQ SET, CMS-GE, CT26 E, CT BOOM ARM SET, CT REMOTE CONTROL,

Offline Coen

  • Posts: 1614
Re: What Festool Did You buy Today?
« Reply #2314 on: June 23, 2022, 03:32 PM »
Quote from: jcameron42 on June 22, 2022, 08:58 PM
Today I purchased a FS1400/2-LR32-55"(1400 mm)Guide Rail



Sent from my iPad using Tapatalk Pro

Nice! First LR 32 rail?
Logged

Offline rst

  • Posts: 2797
Re: What Festool Did You buy Today?
« Reply #2315 on: June 23, 2022, 03:35 PM »
I got two more minis from Hartville, one to hold my new Milwaukee 12v soldering iron, other for anything that my come up.  I probably have 15 or so minis is and IIs as they are great for keeping small tools and accessories organized.
Logged

Offline jcameron42

  • Posts: 17
  • I was made to create!
Re: What Festool Did You buy Today?
« Reply #2316 on: June 23, 2022, 08:33 PM »
Quote from: Coen on June 23, 2022, 03:32 PM
Quote from: jcameron42 on June 22, 2022, 08:58 PM
Today I purchased a FS1400/2-LR32-55"(1400 mm)Guide Rail



Sent from my iPad using Tapatalk Pro

Nice! First LR 32 rail?
No this is my second, so I don’t have to use the Guide Rail on my MFT/3 to join with my other FS1400/2-LR32 Guide Rail when I need to break down full sheets of ply.


Sent from my iPhone using Tapatalk Pro
« Last Edit: June 24, 2022, 12:03 PM by jcameron42 »
Logged
MFT-3, TS 55 REQ, OF 1400 EQ, LR32 HOLE DRILLING SET,  DOMINO DF 500 Q-SET + DOMINO SYS, DOMINO XL DF 700, DOMINO XL CONNECTOR SET, DOMINO DF 500 CONNECTOR SET, CT MINI, CARVEX PS 420 EBQ-PLUS, CARVEX ACCESSORY SET, PDC 18/4 QUADRIVE, CXS LI 2.6 - SET, TID 18 IMPACT DRIVER, SYS-CENTROTEC 2015, ZOBO FORSTNER STYLE BIT SET, HL850 PLANER, ROTEX RO 150, ETS 125 EQ 5, ETS EC 150/3 EQ-PLUS, SURFIX OS SYS3/SET, SYS-NWZ, GUIDE RAIL ACCESSORY KIT, SYSLITE LED LAMP, SYSROLL, SYS-COMBI 2, SORTAINER SYS 4, PARALLEL GUIDE SET, KAPEX KS 120, KAPEX UG-KA-SET, VECTURO OS 400 EQ SET, CMS-GE, CT26 E, CT BOOM ARM SET, CT REMOTE CONTROL,

Offline Blues

  • Posts: 158
Re: What Festool Did You buy Today?
« Reply #2317 on: June 23, 2022, 09:37 PM »
Quote from: jcameron42 on June 23, 2022, 02:12 PM
Quote from: Blues on June 23, 2022, 05:18 AM
Quote from: oberlin1 on May 03, 2022, 10:03 AM
STM1800 should arrive today.

Hope it is as useful for my needs as planned!
I got my STM1800 today. Im short on space.. hope this helps. And it would fit under my mft.

where'd you get it from?
Talk to Hartville. They found an unopened sealed box .. believe they have one more left.
« Last Edit: June 24, 2022, 10:23 AM by Blues »
Logged

Offline jcameron42

  • Posts: 17
  • I was made to create!
Re: What Festool Did You buy Today?
« Reply #2318 on: June 28, 2022, 06:14 AM »
Quote from: Blues on June 23, 2022, 09:37 PM
Quote from: jcameron42 on June 23, 2022, 02:12 PM
Quote from: Blues on June 23, 2022, 05:18 AM
Quote from: oberlin1 on May 03, 2022, 10:03 AM
STM1800 should arrive today.

Hope it is as useful for my needs as planned!
I got my STM1800 today. Im short on space.. hope this helps. And it would fit under my mft.

where'd you get it from?
Talk to Hartville. They found an unopened sealed box .. believe they have one more left.
Thank you


Sent from my iPhone using Tapatalk Pro
Logged
MFT-3, TS 55 REQ, OF 1400 EQ, LR32 HOLE DRILLING SET,  DOMINO DF 500 Q-SET + DOMINO SYS, DOMINO XL DF 700, DOMINO XL CONNECTOR SET, DOMINO DF 500 CONNECTOR SET, CT MINI, CARVEX PS 420 EBQ-PLUS, CARVEX ACCESSORY SET, PDC 18/4 QUADRIVE, CXS LI 2.6 - SET, TID 18 IMPACT DRIVER, SYS-CENTROTEC 2015, ZOBO FORSTNER STYLE BIT SET, HL850 PLANER, ROTEX RO 150, ETS 125 EQ 5, ETS EC 150/3 EQ-PLUS, SURFIX OS SYS3/SET, SYS-NWZ, GUIDE RAIL ACCESSORY KIT, SYSLITE LED LAMP, SYSROLL, SYS-COMBI 2, SORTAINER SYS 4, PARALLEL GUIDE SET, KAPEX KS 120, KAPEX UG-KA-SET, VECTURO OS 400 EQ SET, CMS-GE, CT26 E, CT BOOM ARM SET, CT REMOTE CONTROL,

Offline Coen

  • Posts: 1614
Re: What Festool Did You buy Today?
« Reply #2319 on: June 28, 2022, 04:50 PM »
Quote from: jcameron42 on June 23, 2022, 08:33 PM
Quote from: Coen on June 23, 2022, 03:32 PM
Quote from: jcameron42 on June 22, 2022, 08:58 PM
Today I purchased a FS1400/2-LR32-55"(1400 mm)Guide Rail



Sent from my iPad using Tapatalk Pro

Nice! First LR 32 rail?
No this is my second, so I don’t have to use the Guide Rail on my MFT/3 to join with my other FS1400/2-LR32 Guide Rail when I need to break down full sheets of ply.


Sent from my iPhone using Tapatalk Pro

Nice. 1400+1080 is too short for that anyway  [wink]

I got a 2nd LR 32 rail to do ceiling-height cabinets  [tongue]
Logged

Offline jcameron42

  • Posts: 17
  • I was made to create!
Re: What Festool Did You buy Today?
« Reply #2320 on: June 28, 2022, 06:50 PM »
Quote from: Coen on June 28, 2022, 04:50 PM
Quote from: jcameron42 on June 23, 2022, 08:33 PM
Quote from: Coen on June 23, 2022, 03:32 PM
Quote from: jcameron42 on June 22, 2022, 08:58 PM
Today I purchased a FS1400/2-LR32-55"(1400 mm)Guide Rail



Sent from my iPad using Tapatalk Pro

Nice! First LR 32 rail?
No this is my second, so I don’t have to use the Guide Rail on my MFT/3 to join with my other FS1400/2-LR32 Guide Rail when I need to break down full sheets of ply.


Sent from my iPhone using Tapatalk Pro

Nice. 1400+1080 is too short for that anyway  [wink]

I got a 2nd LR 32 rail to do ceiling-height cabinets  [tongue]
I made it work for quite some time but I couldn’t use my parallel guides with it so it was time.


Sent from my iPhone using Tapatalk Pro
Logged
MFT-3, TS 55 REQ, OF 1400 EQ, LR32 HOLE DRILLING SET,  DOMINO DF 500 Q-SET + DOMINO SYS, DOMINO XL DF 700, DOMINO XL CONNECTOR SET, DOMINO DF 500 CONNECTOR SET, CT MINI, CARVEX PS 420 EBQ-PLUS, CARVEX ACCESSORY SET, PDC 18/4 QUADRIVE, CXS LI 2.6 - SET, TID 18 IMPACT DRIVER, SYS-CENTROTEC 2015, ZOBO FORSTNER STYLE BIT SET, HL850 PLANER, ROTEX RO 150, ETS 125 EQ 5, ETS EC 150/3 EQ-PLUS, SURFIX OS SYS3/SET, SYS-NWZ, GUIDE RAIL ACCESSORY KIT, SYSLITE LED LAMP, SYSROLL, SYS-COMBI 2, SORTAINER SYS 4, PARALLEL GUIDE SET, KAPEX KS 120, KAPEX UG-KA-SET, VECTURO OS 400 EQ SET, CMS-GE, CT26 E, CT BOOM ARM SET, CT REMOTE CONTROL,

Offline Blues

  • Posts: 158
Re: What Festool Did You buy Today?
« Reply #2321 on: June 29, 2022, 03:02 AM »
Received my STM1800 today in a sealed box. Glad I could get hold of one of the last pieces. Look forward to saving my back and having a flexible work surface that would collapse under the MFT.
Logged
Pages: 1 ... 68 69 70 71 72 73 74 75 76 77 [78]  All   Go Up
« previous next »