Today I purchased a FS1400/2-LR32-55"(1400 mm)Guide Rail



Sent from my iPad using Tapatalk Pro

Quote from: oberlin1 on May 03, 2022, 10:03 AM

STM1800 should arrive today.

Hope it is as useful for my needs as planned!

I got my STM1800 today. Im short on space.. hope this helps. And it would fit under my mft.

where'd you get it from?

I got two more minis from Hartville, one to hold my new Milwaukee 12v soldering iron, other for anything that my come up.  I probably have 15 or so minis is and IIs as they are great for keeping small tools and accessories organized.

Quote from: Blues on June 23, 2022, 05:18 AM

Quote from: oberlin1 on May 03, 2022, 10:03 AM

STM1800 should arrive today.

Hope it is as useful for my needs as planned!

I got my STM1800 today. Im short on space.. hope this helps. And it would fit under my mft.

where'd you get it from?

Talk to Hartville. They found an unopened sealed box .. believe they have one more left.

Quote from: Coen on June 23, 2022, 03:32 PM

Quote from: jcameron42 on June 22, 2022, 08:58 PM

Today I purchased a FS1400/2-LR32-55"(1400 mm)Guide Rail



Sent from my iPad using Tapatalk Pro

Nice! First LR 32 rail?

No this is my second, so I don’t have to use the Guide Rail on my MFT/3 to join with my other FS1400/2-LR32 Guide Rail when I need to break down full sheets of ply.


Sent from my iPhone using Tapatalk Pro

Nice. 1400+1080 is too short for that anyway 

I got a 2nd LR 32 rail to do ceiling-height cabinets 

Received my STM1800 today in a sealed box. Glad I could get hold of one of the last pieces. Look forward to saving my back and having a flexible work surface that would collapse under the MFT.

Hi, yea the search engine is wrong I bought these about a month ago from festool,didnt know they made one for metal that why I had to order new

Hi, yea the search engine is wrong I bought these about a month ago from festool,didnt know they made one for metal that why I had to order new

Well thanks for that... ...I managed to melt the plastic brushes while stripping a large set of timbers and hitting unseen metal objects/plates. Consequently, I've been checking the Festool website every couple of weeks for several months now to find out when they were going to be available.

I finally gave up and contacted the local ACME store where they were backordered. That was almost 4 months ago and finally on Friday these showed up in a plastic bag whereas the metal brushes I received from ACME were in a Festool blister-pack.

Strange...

Well thanks for that... ...I managed to melt the plastic brushes while stripping a large set of timbers and hitting unseen metal objects/plates.

I have been using these in metal projects(almost out of vlies) both fine and medium grit no complaintshttps://www.google.com/search?q=lehigh+valley+abrasives&oq=&aqs=chrome.0.69i59i450l5.12128035j0j15&sourceid=chrome&ie=UTF-8

To celebrate my 35th birthday for the 11th time I told my wife i was going to purchase a vacuum cleaner - I left this pretty vague as i walked out the door this afternoon.

After a week or two of much deliberation ( should I shouldn't I, but i want the 36AC, but the 26 will do what i want etc etc) and reviews, i checked my bank balance and then I picked up a new CTM midi and the Bluetooth button for the hose

I worked out it should do everything i want and i hated having to get my cheap work vacuum cleaner out of my van every weekend ( lamest excuse ever)
I still need want to get the Cyclone and a 36mm hose mainly for the Kapex at some point in the future, like in about 3 or 4 months when ive paid of this weeks tool bill

But now i have a festool Backpack to go with the Hoodie i got with the Rotex, that ive been wearing for the last few weeks ( anything under 22 celcius with wind factor is freezing in Darwin )

And as an added bonus i managed to find and order the 104 piece Centrotec installers kit earlier in the week, after many many moons looking for and at them.

Got the new TS 55 FEBQ in a great deal. Only had time to unpack it but oh darn is that Systainer ³ oversized.

But at least the inlay is a bit smarter than the classic inlay, offering a space for the rods, Quick clamps and a cutout to reach below the saw blade storage.

What's wrong with the older inlay? Mine has places for the rods, blades, end stop, edge guide and clamps, in the older T-Loc.
It also sits with the handle facing left, which I much prefer to the way the TS75 fits.

Ordered the latest TSC 55 KEB from Hartville Hardware.  Seems to be the only vendor that currently has them.

Quote from: Coen on July 24, 2022, 06:22 PM

Quote from: Crazyraceguy on July 24, 2022, 11:54 AM

Quote from: Coen on July 24, 2022, 06:23 AM

Got the new TS 55 FEBQ in a great deal. Only had time to unpack it but oh darn is that Systainer ³ oversized.

But at least the inlay is a bit smarter than the classic inlay, offering a space for the rods, Quick clamps and a cutout to reach below the saw blade storage.

What's wrong with the older inlay? Mine has places for the rods, blades, end stop, edge guide and clamps, in the older T-Loc.
It also sits with the handle facing left, which I much prefer to the way the TS75 fits.

The T-Loc inlay is different than the inlay for the Systainer Classic. For T-Loc there are different versions too btw.

The classic inlay was not designed for the 160mm quick clamps but for the 120mm screw clamps. They do fit, but only in one specific way that isn't obvious. No dedicated space for the connector rods. The blade storage doesn't let you grab under the blades to take them out. I have pices of sturdy smooth paper under each blade.
And above all; no space for the FS-WA/90° as the classic Systainer is a bit smaller where the FS-WA/90° sits in T-Loc.
So all that was solved by buying a new machine. I can resell the new rail and resell my old TS55 and the upgrade costs will be minor for a new machine with new Systainer that also the FS-WA/90°

I wasn't aware that there were different versions for the T-loc? I guess I have only seen the one? I did misspeak though about the rods. I looked at mine today, there is no place for them.
Yes, the blade retrieval could be better, but it is there. I was glad to see that there was a space for the parallel edge guide, when I bought one. It's probably stupid to hope that the same one works with the TS75? never tried it

I wasn't either, but apparently it got changed around at some point with the saw sitting in the Systainer the other way around. Also had to do with the dust extraction port being changed and you had to take it off to fit the saw in the Systainer. That was of course a pita so they revised the inlay.

The Systainer Classic inlay is yet again different. Although the parallel guide also fits nicely in there. I bought it too, but I don't think I ever used it...

See here;
https://www.festoolownersgroup.com/festool-and-tanos-systainers/ts-55-(r)-inlays/

Just ordered Kapex It was on my last Festool list.  Also ordered Dewalt stand (dwx273) to go with it.  Any advise prior to using the king of miter saw will be great!

Why not the Festool stand?

Congrats!

How about these?

• Check that the fence is square and inline (straight across) and the table is flat across, front to back.
  Make test cuts to check the laser, angles and bevels for accuracy.
  Use a short 36mm dia, hose for dust extraction.
  Use a ZCI (I use the Fastcap strips, about $1US a strip).
  

These are really great advises! I didn't know zci existed mas a strip tape! Nice! Thanks for your time to write these down